FBODaily.com | FedBizOpps: PRESOL | 53 | Generators - Package #1

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 26, 2017 FBO #5755
SOLICITATION NOTICE

53 -- Generators - Package #1

Notice Date: 8/24/2017
Notice Type: Combined Synopsis/Solicitation
NAICS: 335312 — Motor and Generator Manufacturing
Contracting Office: Department of Homeland Security, Federal Emergency Management Agency, Recovery Branch, 500 C Street SW, Patriots Plaza -- 5th Floor, Washington, District of Columbia, 20472, United States
ZIP Code: 20472
Solicitation Number: HSFE70-17-Q-0051
Point of Contact: Amanda Morgan, Phone: 2022125936, Lashawn Smith, Phone: 202-646-4306
E-Mail Address: amanda.morgan.2@fema.dhs.gov, lashawn.smith@fema.dhs.gov
(amanda.morgan.2@fema.dhs.gov, lashawn.smith@fema.dhs.gov)
Small Business Set-Aside: N/A
Description: Attachment 3 – Specifications Compliance (Offerors Complete) Attachment 2 – Generator Criteria Specifications Attachment 1 - SOW Combined Synopsis/Solicitation HSFE70-17-Q-0051 for Generators This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Request for Quote (RFQ) number is HSFE70-17-Q-0051. Provisions and clauses in effect through Federal Acquisition Circular 05-89 are incorporated. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this addresses: http://farsite.hill.af.mil/. The NAICS code is 335312, with a small business size standard of 1,250 employees. This is an unrestricted full and open acquisition. All qualified vendors are encouraged to submit a quote. The Federal Emergency Management Agency requests quotes from qualified sources capable of providing generators. All terms, conditions, requirements, clauses, and provisions herein shall apply to this combined synopsis/solicitation. All Offerors shall submit a quote for all the following. ITEM DESCRIPTION OF QTY UNIT UNIT AMOUNT NO. SUPPLIES/SVCS PRICE 0001 1.00 EA ____________ _______________ Generator: 201-300kW (400kW low range) See Attached SOW and Specifications Shipped to FEMA Distribution Frederick MD 21704 0002 1.00 EA ____________ _______________ Generator: 201-300kW (400kW low range) See Attached SOW and Specifications Shipped to FEMA Distribution Moffett Field CA 94035 0003 2.00 EA ____________ _______________ Generator: 301-400kW (400kW high range) See Attached SOW and Specifications Shipped to FEMA Distribution Caguas PR 00725 0004 1.00 EA ____________ _______________ External Fuel Tank (100kW ABOVE units) See Attached SOW and Specifications Shipped to FEMA Distribution Frederick MD 21704 0005 1.00 EA ____________ _______________ External Fuel Tank (100kW ABOVE units) See Attached SOW and Specifications Shipped to FEMA Distribution Moffett Field CA 94035 0006 2.00 EA ____________ _______________ External Fuel Tank (100kW ABOVE units) See Attached SOW and Specifications Shipped to FEMA Distribution Caguas PR 00725 0007 2.00 EA ____________ _______________ Shipping and Handling to Frederick MD 21704 0008 2.00 EA ____________ _______________ Shipping and Handling to Moffett Field CA 94035 0009 4.00 LOT ____________ _______________ Shipping and Handling to Caguas PR 00725. DELIVERY SCHEDULE: ITEM NUMBER QUANTITY DELIVERY 0001 1.00 60 Days ARO 0002 1.00 60 Days ARO 0003 2.00 60 Days ARO 0004 1.00 60 Days ARO 0005 1.00 60 Days ARO 0006 2.00 60 Days ARO 0007 2.00 60 Days ARO 0008 2.00 60 Days ARO 0009 4.00 60 Days ARO PLACE OF DELIVERY: 1) FEMA Distribution Frederick MD 4429 Buckeystown Pike Frederick, MD 21704 2) FEMA Distribution Center Moffett NASA AMES Research Center Bldg. 144, Door # 7 Moffett Field, CA 94035 3) FEMA Distribution Center PR Road 1, Km 25.1, Quebrada Areans Ward Caguas, PR 00725 All applicable manufacturer commercial warranties shall be valid for all products. IDENTIFICATION OF GOVERNMENT OFFICIALS: The Government Officials assigned to this contract are as follows: Contracting Officer: Name: LaShawn Smith Phone: 202-646-4306 Email: LaShawn.Smith@fema.dhs.gov Contract Specialist: Name: Amanda Morgan Phone: 202-212-5936 Email: Amanda.Morgan.2@fema.dhs.gov Technical Point of Contact hereby delegated authority to accept goods and services and review and approve invoices for this contract: Name: TBD Phone: TBD Email: TBD TYPE OF CONTRACT: The Government contemplates award of a Firm Fixed Price purchase order resulting from this combined synopsis/solicitation. PROVISIONS AND CLAUSES: FAR 52.204-19, Incorporation by Reference of Representations and Certifications. FAR 52.209-7 Information Regarding Responsibility Matters. (a) Definitions. As used in this provision- "Administrative proceeding" means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability (e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceedings at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables. "Federal contracts and grants with total value greater than $10,000,000" means- (1) The total value of all current, active contracts and grants, including all priced options; and (2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules). "Principal" means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions). (b) The offeror [ ] has [ ] does not have current active Federal contracts and grants with total value greater than $10,000,000. (c) If the offeror checked "has" in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information: (1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions: (i) In a criminal proceeding, a conviction. (ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more. (iii) In an administrative proceeding, a finding of fault and liability that results in- (A) The payment of a monetary fine or penalty of $5,000 or more; or (B) The payment of a reimbursement, restitution, or damages in excess of $100,000. (iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision. (2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence. (d) The offeror shall post the information in paragraphs (c)(1)(i) through (c)(1)(iv) of this provision in FAPIIS as required through maintaining an active registration in the System for Award Management database via https://www.acquisition.gov (see 52.204-7). (End of provision) FAR 52.212-1, Instructions to Offerors---Commercial Items, apply to this acquisition with the exception of (d), (h), and (i) of the clause, which are RESERVED; FAR 52.212-2 Evaluation-Commercial Items. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: See EVALUATION FACTORS FOR AWARD below. This acquisition will utilize the Lowest Priced Technically Acceptable (LPTA) procedure to make a best value award. A decision on the technical acceptability of each offeror's quotations will be made. For those offerors which are determined to be technically acceptable, award will be made to that offeror with the lowest overall price, including shipping. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) FAR 52.212-3, Offeror Representations and Certifications-Commercial Items. The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Website located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision. (a) Definitions. As used in this provision- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation", means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Sensitive technology"- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Small disadvantaged business concern", consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern- (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b)(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (r) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it □ is, □ is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that- (i) It □ is,□ is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It □ is, □ is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that- (i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246- (1) Previous contracts and compliance. The offeror represents that- (i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It □ has, □ has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that- (i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or (ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item" "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) TheGovernment will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals- (1) □ Are, □ are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) □ Have, □ have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; (3) □ Are, □ are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) □ Have, □ have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at.] (1) Listed end products. Listed End Product Listed Countries of Origin ___________________ ___________________ ___________________ ___________________ (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] □ (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. □ (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) □ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) □ Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Labor Standards (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] □ (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror □ does □ does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. □ (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror □ does □ does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). □ TIN: ________________________________. □ TIN has been applied for. □ TIN is not required because: □ Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; □ Offeror is an agency or instrumentality of a foreign government; □ Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. □ Sole proprietorship; □ Partnership; □ Corporate entity (not tax-exempt); □ Corporate entity (tax-exempt); □ Government entity (Federal, State, or local); □ Foreign government; □ International organization per 26 CFR 1.6049-4; □ Other ________________________________. (5) Common parent. □ Offeror is not owned or controlled by a common parent; □ Name and TIN of common parent: Name ________________________________. TIN _________________________________. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations. (1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (2) Representation. The Offeror represents that- (i) It □ is, □ is not an inverted domestic corporation; and (ii) It □ is, □ is not a subsidiary of an inverted domestic corporation. (o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran. (1) The offeror shall e-mail questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation. (1) The Offeror represents that it □ has or □ does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture. (2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information: Immediate owner CAGE code: ____________________. Immediate owner legal name: _____________________. (Do not use a "doing business as" name) Is the immediate owner owned or controlled by another entity: □ Yes or □ No. (3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information: Highest-level owner CAGE code: __________________. Highest-level owner legal name: ___________________. (Do not use a "doing business as" name) (q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. (1) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, The Government will not enter into a contract with any corporation that- (i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or (ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (2) The Offeror represents that- (i) It is □ is not □ a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and (ii) It is □ is not □ a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (r) Predecessor of Offeror. (Applies in all solicitations that include the provision at 52.204-16, Commercial and Government Entity Code Reporting.) (1) The Offeror represents that it □ is or □ is not a successor to a predecessor that held a Federal contract or grant within the last three years. (2) If the Offeror has indicated "is" in paragraph (r)(1) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order): Predecessor CAGE code: ________ (or mark "Unknown") Predecessor legal name: _________________________ (Do not use a "doing business as" name) (End of provision) FAR 52.212-4, Contract Terms and Conditions---Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. In compliance with said clause, the following FAR clauses apply: 52.203-6, Restrictions on Subcontractor Sales to the Government; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.209-9, Updates of Publically Available Information Regarding Responsibility Matters; 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns; 52.219-8, Utilization of Small Business Concerns; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Equal Opportunity for Veterans; 52.222-36, Affirmative Action for Handicapped Workers with disabilities; 52.222-37, Employment Reports on Veterans; 52.222-40, Notification of Employee Rights Under the National Labor Relations Act; 52.222-50, Combating Trafficking in Persons; 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving; 52.225-1, Buy American - Supplies; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications; FAR. 52. 232-18 Availability of Funds FAR 52.233-3, Protest after Award; FAR 52.252-2, CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.acquisition.gov/far/index.html http://farsite.hill.af.mil/ (End of clause) HSAR 3052.209-70, Prohibition on contracts with corporate expatriates; HSAR 3052.212-70, Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items. In compliance with said clause, the following FAR clauses apply: 3052.205-70, Advertisements, Publicizing Awards, and Releases. NOTICE OF FILING REQUIREMENTS FOR AGENCY PROTESTS A. Preface Prior to submission of an agency protest, all parties must use their best efforts to resolve concerns raised by an interested party. FEMA offers, as an option for dispute resolution, Alternative Dispute Resolution (ADR). ADR is an informal, expeditious and inexpensive way to resolve contract issues and is designed to promote satisfying solutions and fair procedures. For more information on FEMA's ADR services, please contact FEMA's ADR office at the following address: Federal Emergency Management Agency Office of Alternative Dispute Resolution 500 C Street SW, Suite 840 Washington, DC 20472 If concerns cannot be resolved, protesters may use these procedures when a resolution is requested from the agency. These procedures have been designed to create an avenue for resolving third party grievances in connection with the acquisition process outside of formal processes through the Government Accountability Office (GAO) and the United States Court of Federal Claims (CFC). Filing an agency protest is not a prerequisite to filing at the GAO or CFC. If the protester files a protest through the GAO or CFC while their protest is pending at the agency level, FEMA may dismiss the agency protest. Pursuing an agency protest does not extend the time for obtaining a stay at GAO. These procedures are in addition to the existing protest procedures contained in FAR Subpart 33.103. B. Definitions. (1) "Agency protest," as used in this SOP, is one that may be filed with either the Contracting Officer or the officer responsible for the resolution of all agency protests filed at the level above the Contracting Officer. (2) "Ombudsman," as used in this SOP, is the agency official above the level of the Contracting Officer designated by the Director of the Acquisition Management Division to handle and issue the formal agency decision resolving the protest. Protesters using these procedures may protest directly to the Ombudsman. (3) "Day," as used in this SOP, is a calendar day. In computing a period of time for the purpose of these procedures, the day from which the period begins to run is not counted. When the last day of the period is a Saturday, Sunday or a Federal holiday, the period extends to the next day that is not a Saturday, Sunday or a Federal holiday. Similarly, when the Washington, DC offices of FEMA are closed for all or part of the last day, the period extends to the next day on which the Agency is open. C. Submission Guidelines. (1) Agency protests may be filed through the Contracting Officer or, at the level above the Contracting Officer, through the Ombudsman either by FAX transmission or by "Certified Mail" (Return Receipt Requested) as follows: a. Protests filed through the Contracting Officer or the Ombudsman must be mailed or faxed to: LaShawn Smith, Contracting Officer Department of Homeland Security/FEMA OCPO/Incident Support Section 500 C St, SW Washington DC 20472 -OR- David Orris Ombudsman Department of Homeland Security/FEMA OCPO Building D, Room 123 16825 South Seton Avenue Emmitsburg, MD 21727 301-447-1830 301-447-1092 - FAX b. The outside of the envelope or beginning of the FAX transmission must be marked "Agency Protest". c. If the protester submits the protest directly through the Ombudsman, the protester must also, within one (1) day of submitting the protest to the Ombudsman, submit a copy of the protest to the responsible Contracting Officer either by FAX transmission or by "Certified Mail" (Return Receipt Requested). (2) To be filed on a given day, protests and any subsequent appeals must be received by 4:30 PM, current-local time. Any protests received after that time will be considered to be filed on the next day. (3) Protest submissions will not be considered filed until all of the following information is provided: a. the protester's name, address, telephone number and fax number; b. the solicitation or contract number; c. a detailed statement of all factual and legal grounds for protests, to include an explanation of how the protester was prejudiced; d. copies of relevant documents; e. a request for ruling by the agency; f. a statement detailing the form of relief requested; g. all information establishing that the protester is an interested party for the purposes of filing a protest; and h. all information establishing the timeliness of the protest. (4) All protests must be signed by an authorized representative of the protester, and must be addressed to the Contracting Officer or the Ombudsman. D. Timeliness/Resolution of Protests. (1) Protests based upon alleged improprieties in a solicitation which are apparent prior to bid opening or the time set for receipt of initial proposals shall be filed prior to bid opening or the time set for receipt of initial proposals. In procurements where proposals are requested, alleged improprieties which do not exist in the initial solicitation but which are subsequently incorporated into the solicitation must be protested not later than the next closing time for receipt of proposals following the incorporation. (2) Protests other than those covered by paragraph (1) of this section shall be filed not later than 10 days after the basis of protest is known or should have been known (whichever is earlier), with the exception of protests challenging a procurement conducted on the basis of competitive proposals under which a debriefing is requested and, when requested, is required. In such cases, with respect to any protest basis which is known or should have been known either before or as a result of the debriefing, the initial protest shall not be filed before the debriefing date offered to the protester, but shall be filed not later than 10 days after the date on which the debriefing is held. (3) Protests filed through the Contracting Officer. a. Within twenty (20) days after the protest is filed through the Contracting Officer, the Contracting Officer will send a written ruling and a summary of the reasons supporting the ruling to the protester by "Certified Mail (Return Receipt Requested)". b. Appeals i. Protesters who filed protests through the Contracting Officer may, within five (5) days of receipt of the Contracting Officer's written ruling, appeal to the Ombudsman. ii. Requests for Appellate Review must be submitted to the Ombudsman by FAX transmission or by "Certified Mail" (Return Receipt Requested). iii. The Ombudsman will send a written ruling and a summary of the reasons supporting the ruling to the protester by "Certified Mail (Mail Receipt Requested)" within ten (10) days of receipt of the request for appellate review of the Contracting Officer's decision. iv. In accordance with FAR 33.103(d)(4) and 4 C.F.R 21.2(a)(3), if there is an agency appellate review of the Contracting Officer's decision on the protest, it will not extend GAO'S timeliness requirements. Therefore, any subsequent protest to the GAO must be filed within ten (10) days of knowledge of initial adverse agency action. (4) Protests filed through the Ombudsman: a. If the protester protests directly through the Ombudsman, the Ombudsman will send a written ruling and a summary of the reasons supporting the ruling to the protester by "Certified Mail (Mail Receipt Requested)" within thirty-five (35) days after the protest was filed. b. Protests filed directly through the Ombudsman cannot be appealed within the agency. E. Dismissal of Protests. The agency may dismiss protests when protesters file protests through the GAO or CFC while their protests are pending at the agency level; and for failure to comply with any of the requirements of these agency protest procedures. For example, the agency may dismiss protests that are procedurally or substantively defective (e.g., the protest is untimely or the protest fails to clearly state legally sufficient grounds of protest). NARA RECORDS MANAGEMENT LANGUAGE FOR CONTRACTS The following standard items relate to records generated in executing the contract and should be included in a typical Electronic Information Systems (EIS) procurement contract: 1. Citations to pertinent laws, codes and regulations such as 44 U.S.C chapters 21, 29, 31 and 33; Freedom of Information Act (5 U.S.C. 552); Privacy Act (5 U.S.C. 552a); 36 CFR Part 1222 and Part 1228. 2. Contractor shall treat all deliverables under the contract as the property of the U.S. Government for which the Government Agency shall have unlimited rights to use, dispose of, or disclose such data contained therein as it determines to be in the public interest. 3. Contractor shall not create or maintain any records that are not specifically tied to or authorized by the contract using Government IT equipment and/or Government records. 4. Contractor shall not retain, use, sell, or disseminate copies of any deliverable that contains information covered by the Privacy Act of 1974 or that which is generally protected by the Freedom of Information Act. 5. Contractor shall not create or maintain any records containing any Government Agency records that are not specifically tied to or authorized by the contract. 6. The Government Agency owns the rights to all data/records produced as part of this contract. 7. The Government Agency owns the rights to all electronic information (electronic data, electronic information systems, electronic databases, etc.) and all supporting documentation created as part of this contract. Contractor must deliver sufficient technical documentation with all data deliverables to permit the agency to use the data. 8. Contractor agrees to comply with Federal and Agency records management policies, including those policies associated with the safeguarding of records covered by the Privacy Act of 1974. These policies include the preservation of all records created or received regardless of format (paper, electronic, etc.) or mode of transmission (e-mail, fax, etc.) or state of completion (draft, final, etc.). 9. No disposition of documents will be allowed without the prior written consent of the Contracting Officer. The Agency and its contractors are responsible for preventing the alienation or unauthorized destruction of records, including all forms of mutilation. Willful and unlawful destruction, damage or alienation of Federal records is subject to the fines and penalties imposed by 18 U.S.C. 2701. Records may not be removed from the legal custody of the Agency or destroyed without regard to the provisions of the agency records schedules. 10. Contractor is required to obtain the Contracting Officer's approval prior to engaging in any contractual relationship (sub-contractor) in support of this contract requiring the disclosure of information, documentary material and/or records generated under, or relating to, this contract. The Contractor (and any sub-contractor) is required to abide by Government and Agency guidance for protecting sensitive and proprietary information. Additional contract terms and conditions applicable to this procurement are: BILLING INSTRUCTIONS (JUN 2014) Contractors will use Standard Form 1034 (Public Voucher for Purchases and Services Other Than Personal) located at http://www.gsa.gov/portal/forms/type/SF when submitting a payment request. A payment request means any invoice or request for contract financing payment requesting reimbursement for supplies or services rendered. The Contractor shall not be paid more frequently than on a monthly basis. Contractors shall submit vouchers electronically in pdf format to the FEMA Finance Center at: FEMA-Finance-Vendor-Payments@fema.dhs.gov. A copy of the voucher must be submitted electronically to the contracting officer identified within this contract. The submission of vouchers electronically will reduce correspondence and other causes for delay to a minimum and will facilitate prompt payment to the Contractor. Paper vouchers mailed to the finance center will not be processed for payment. If the Contractor is unable to submit a payment request in electronic form, the contractor shall submit the payment request using a method mutually agreed to by the Contractor, the Contracting Officer, and the payment office. DEFECTIVE OR IMPROPER INVOICES (JUN 2014) Name, title, phone number, and email of officials of the business concern who are to be notified when the Government receives an improper invoice. ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ INVOICE APPROVAL (JUN 2014) The following FEMA individual (in addition to the Contracting Officer) is hereby delegated authority to accept goods and services and to review and approve invoices for this contract: Authorized Invoice Approver Name: TBD Title: TBD Phone: TBD Email: TBD INVOICE INSTRUCTIONS (JUN 2014) Invoices shall be submitted as follows: Contractors will use Standard Form 1034 (Public Voucher for Purchases and Services Other Than Personal) and SF 1035 Continuation sheet when requesting payment for supplies or services rendered. The voucher must provide a description of the supplies or services, by line item (if applicable), quantity, unit price, and total amount. The item description, unit of measure, and unit price must match those specified in the contract. Invoices that do not match the line item pricing in the contract will be considered improper and will be returned to the Contractor. SF 1034 and 1035 instructions: SF 1034--Fixed Price The information which a contractor is required to submit in its Standard Form 1034 is set forth as follows: (1) U.S. Department, Bureau, or establishment and location insert the names and address of the servicing finance office unless the contract specifically provides otherwise. (2) Date Voucher Prepared - insert date on which the public voucher is prepared and submitted. (3) Contract/Delivery Order Number and Date - insert the number and date of the contract and delivery order, if applicable, under which reimbursement is claimed. (4) Requisition Number and Date - leave blank. (5) Voucher Number - insert the appropriate serial number of the voucher. A separate series of consecutive numbers, beginning with Number 1, shall be used by the contractor for each new contract. When an original voucher was submitted, but not paid in full because of suspended costs, resubmission vouchers should be submitted in a separate invoice showing the original voucher number and designated with the letter "R" as the last character of the number. If there is more than one resubmission, use the appropriate suffix (R2, R3, etc.) The last voucher of every contract or task order should be marked with the next sequential number, with the words "FINAL" (e.g. Invoice No. 1234-FINAL). (6) Schedule Number; Paid By; Date Invoice Received - leave blank. (7) Discount Terms - enter terms of discount, if applicable. (8) Payee's Account Number - this space may be used by the contractor to record the account or job number(s) assigned to the contract or may be left blank. (9) Payee's Name and Address - show the name of the contractor exactly as it appears in the contract and its correct address, except when an assignment has been made by the contractor, or the right to receive payment has been restricted, as in the case of an advance account. When the right to receive payment is restricted, the type of information to be shown in this space shall be furnished by the Contracting Officer. (10) Shipped From; To; Weight Government B/L Number - insert for supply contracts. (11) Date of Delivery or Service - show the month, day and year, beginning and ending dates of supplies or services delivered. (12) Articles and Services - insert the following: "For detail, see Standard Form 1035 total amount claimed transferred from Page ___ of Standard Form 1035." Type the following certification, signed by an authorized official, on the face of the Standard Form 1034. "I certify that all payments requested are for appropriate purposes and in accordance with the agreements set forth in the contract." _______________________ _________ (Name of Official) (Title) (13) Quantity; Unit Price - insert for supply contracts. (14) Amount - insert the amount claimed for the period indicated in (11) above. This amount should be transferred from the total per the SF 1035 Continuation Sheet. INVOICE PREPARATION INSTRUCTIONS SF 1035 The SF 1035 will be used to identify the specific item description, quantities, unit of measure, and prices for each category of deliverable item or service. Suitable self-designed forms may be submitted instead of the SF 1035 as long as they contain the information required. The information which a contractor is required to submit in its Standard Form 1035 is set forth as follows: U.S. Department, Bureau, or Establishment - insert the name and address of the servicing finance office. Voucher Number - insert the voucher number as shown on the Standard Form 1034. Schedule Number - leave blank. Sheet Number - insert the sheet number if more than one sheet is used in numerical sequence. Use as many sheets as necessary to show the information required. Number and Date of Order - insert payee's name and address as in the Standard Form 1034. Articles or Services - insert the contract number as in the Standard Form 1034. Amount - insert the total quantities contract value, and amount and type of fee payable (as applicable). A summary of claimed current and cumulative goods and services delivered and accepted to date. - Invoices shall include an itemization of all goods and services delivered and accepted for the period by item and by CLIN. Each invoice shall include sufficient detail to identify goods and services as compared to and in accordance with contract terms and conditions. Invoices that do not match the line item pricing in the contract will be considered improper and returned to the contractor. In addition, each invoice shall detail the total charges by showing current and cumulative goods and services both currently invoiced and cumulative to date. CONTRACTOR UTILIZATION OF GOVERNMENT FACILITIES AND PROPERTY (a) A portion of the effort required to be accomplished under this contract must be performed at a Government owned facility. The Contractor, therefore, will be granted ingress and egress at the specific facility where effort is to be performed. (b) While Contractor personnel are at the Government facility, they are required to comply with all rules and regulations of the facility, specific mention being made of complying with rules and regulations governing conduct with respect to health and safety not only as they relate to themselves but also to other personnel who are Government employees or agents of the Government and to property at the site regardless of whether or not title to such property vests with the Government. Contractor personnel whose duties require their presence at a Government facility shall be clearly identifiable by the wearing of a distinctive badge obtained by the Contractor from the Government. Prescribed identification for all Contractor personnel shall immediately be delivered to the installation security office for cancellation or disposition upon termination of employment with the Contractor or expiration or termination of contract(s) authorizing such identification. (c) The Government property to which the Contractor will have access under this clause will be made available during the life of the contract. In the event the property to which the Contractor is to have access is not made available as scheduled, the Contracting Officer shall, upon timely written request made by the Contractor, make a determination of the delay, if any, occasioned the contractor thereby, and shall equitably adjust the delivery or performance dates of the contract, or both, and any other contractual provision affected by any such delay, in accordance with the procedures provided for in the clause of this contract entitled "Changes." (d) The property to which the Contractor has access will at all times be in the custody of the Government and will not be considered "Government Property" furnished to the Contractor. ATTACHMENTS: Attachment 1 - Statement of Work (SOW) Attachment 2 - Generator Criteria Specifications Attachment 3 - Specifications Compliance (Offerors Complete) QUOTE PREPARATION INSTRUCTIONS: This section specifies the format and content that offerors shall use in this Request for Quote (RFQ). The intent is not to restrict the offerors in the manner in which they will perform their work but rather to ensure a certain degree of uniformity in the format of the responses for evaluation purposes. Offerors shall submit a quote that is legible and comprehensive enough to provide the basis for a sound evaluation by the Government. Information provided shall be precise, factual, and complete. Legibility, clarity, completeness, and responsiveness are of the utmost importance. Quotes shall be in the form prescribed by, and shall contain a response to, each of the areas identified. Any quote that does not provide, as a minimum, that which is required in this solicitation may be determined to be substantially incomplete and not warrant any further consideration. A complete quote, including separate Technical Quote and Price Quote, shall be submitted by the closing date specified in the solicitation. 1. Technical Quote Instructions The offeror shall complete the Attachment 3 Specifications Compliance Offerors Complete in order to receive a technical rating. The fillable excel file breaks down, by kW size what the specifications are and if the unit(s) do or not need meet that specified requirement; there is a summary tab that consists of a roll-up of all specifications and kW size and if they met or did not meet the requirement. In addition to completing the Attachment 3 Specifications Compliance Offeror Complete, offerors shall provide detailed technical specification sheets indicating that they meet the FEMA Specification Requirements (Attachment 2 Generator Criteria Specifications) - this is limited to no more than three (3) pages as a separate document. Per Attachment 2 Generator Criteria Specifications - generator specifications are: Prime Power Rating (kW): 300kW 400kW Minimum kW - Maximum KW Range (FEMA Acceptable) 201-300kW 301-400kW Unit kVA (.8 power factor): 0.8 0.8 GENERATOR SPECIFICATIONS Enclosure: Weather Proof/Resistant, Sound Attenuated Weather Proof/Resistant, Sound Attenuated Phase: 3 Phase 3 Phase Switchable: The vendor SHALL provide any hardware and/or software, manuals, or other documentation (in digital or hard copy) that provide detailed directions which will allow FEMA mechanics to switch/set output voltages and phase configurations on the generator and voltage regulator The vendor SHALL provide any hardware and/or software, manuals, or other documentation (in digital or hard copy) that provide detailed directions which will allow FEMA mechanics to switch/set output voltages and phase configurations on the generator and voltage regulator Voltage 3 Phase: 208, 220, 240, 416, 440, 480V Switchable 208, 220, 240, 416, 440, 480V Switchable Voltage 1 Phase: 120, 127, 139, 240, 254, 277V Switchable 120, 127, 139, 240, 254, 277V Switchable Generator RPM: 1800 1800 Generator Output Circuit Breaker: YES YES Frequency: 60 HZ 60 HZ No. Poles 4 4 Excitation: Brushless with AVR Brushless with AVR Frequency Regulation (Steady State): 0.25% 0.25% Alternator Heat Rise: NTE 85°(F) with CLASS F insulation wire NTE 85°(F) with CLASS F insulation wire Sound Level: NTE 75dB(A) full load @ 23 ft. NTE 75dB(A) full load @ 23 ft. Trailer or Skid Mounted: SKID SKID Load Terminal - CamLok Connectors: YES YES Integrally-mounted automated load bank system able to apply resistive load up to 40% during periods of low temperature/load conditions. SHALL have the capability to constantly monitor, sense and manage exhaust temperature with automatic shut-off for periods of high load conditions.: explain in detailed specifications how proposed load bank meets the FEMA Requirements Fully integrally (mounted) into generator Fully integrally (mounted) into generator FULLY AUTOMATED, zero operator input required FULLY AUTOMATED, zero operator input required SHALL have ability to apply no more than 40% resistive load during periods of low temperature/load conditions SHALL have ability to apply no more than 40% resistive load during periods of low temperature/load conditions SHALL have the capability to constantly monitor, sense and manage exhaust temperature with automatic shut-off for periods of high load conditions SHALL have the capability to constantly monitor, sense and manage exhaust temperature with automatic shut-off for periods of high load conditions ENGINE Emissions: explain in detailed specifications how generators would be manufactured with Tier4FINAL engines - no aftermarket modification) Tier 4 FINAL Tier 4 FINAL Engine Design: 4-cycle, water cooled DIESEL, Ultra Low Sulfur Diesel, turbocharged, direct injection. Charged Air Cooled EGR 4-cycle, water cooled DIESEL, Ultra Low Sulfur Diesel, turbocharged, direct injection. Charged Air Cooled EGR Tier 4 Engine Capability: provide proof/documentation in detailed specifications that engines will meet Tier4 Engine Capability requirements SHALL be capable to perform "Passive Regen" on it's own with no operator at 40% - 50% load at full-rated speed SHALL be capable to perform "Passive Regen" on it's own with no operator at 40% - 50% load at full-rated speed SHALL have the capability to "Not Regen" at 80%-90% Load SHALL have the capability to "Not Regen" at 80%-90% Load Engine Accessories: provide a list of the individual engine accessory requirements in the detailed specifications indicating that vendor meets FEMA requirement Fuel Filter Fuel Filter Lube Oil Filter Lube Oil Filter Intake Air Filter Intake Air Filter Lube Oil Cooler Lube Oil Cooler Fuel transfer pump Fuel transfer pump Fuel priming pump Fuel priming pump Fuel priming pump switch, MUST be integrated into the control panel Fuel priming pump switch, MUST be integrated into the control panel Emergency Shut-off Emergency Shut-off Fuel/Water Separator Fuel/Water Separator Water Pump Water Pump Oil Pump Oil Pump Full flow lubrication oil filters Full flow lubrication oil filters Pressure relief valve Pressure relief valve Dipstick oil level indicator Dipstick oil level indicator Water Temperature & Lube Oil Pressure Gauge Water Temperature & Lube Oil Pressure Gauge BATTERY Battery Type: Sealed Gel Cell or Absorbed glass matt (AGM) Sealed Gel Cell or Absorbed glass matt (AGM) CONTROL PANEL Control Panel, to Include (but not limited): provide a list of the control panel requirements in detailed specifications indicating that vendor meets FEMA requirement Engine Analog Hour meter - 12volt or 24volt (unit depending) - must be integrated into control panel AND must match digital hour meter Engine Analog Hour meter - 12volt or 24volt (unit depending) - must be integrated into control panel AND must match digital hour meter Three Position panel mounted switch (Stop-Manual-Auto) Three Position panel mounted switch (Stop-Manual-Auto) Oil pressure gauge Oil pressure gauge Water temperature gauge Water temperature gauge A/C output Amperage A/C output Amperage Volt Meter Volt Meter Frequency Meter Frequency Meter Fuel Gauge Fuel Gauge Battery Voltmeter Battery Voltmeter Phase selector switch with phase voltage & amperage Phase selector switch with phase voltage & amperage DPF cleaning cycle indication DPF cleaning cycle indication Programmable Remaining Fuel (tank) Level % Indicator - for external tank as well Programmable Remaining Fuel (tank) Level % Indicator - for external tank as well Fuel leak detected warning light - for external tank as well Fuel leak detected warning light - for external tank as well Generator Output Bus Separate From Control Panel - Located in a Separate Lockable Panel: Yes Yes AC (Generator) & DC (Engine) Controls Enclosed in a Separate Box or Separated by Divider: Yes Yes SAFETY Safety: Engine shutdown and lockout upon: provide a list of safety features requirements in detailed specifications indicating that vendor meets FEMA requirement High water temperature High water temperature Low oil pressure Low oil pressure Over speed Over speed Engine over crank Engine over crank Low Coolant Low Coolant Low DEF Level Low DEF Level FUEL Fuel Tank: 24 hour external UL 142 Double-wall w/ capacity sufficient - 24- hour EXTERNAL tank UL 142 Double-wall w/ capacity sufficient - 24- hour EXTERNAL tank External tank Gauge - connect to the Generator Control Panel External tank Gauge - connect to the Generator Control Panel Lifting points on base frame (two ea.: 6" x 10" x.250" fork pockets & rub spacers Lifting points on base frame (two ea.: 6" x 10" x.250" fork pockets & rub spacers Basin (external) equipped with liquid level sensor for leakage into basin - link to generator Basin (external) equipped with liquid level sensor for leakage into basin - link to generator Fuel Valve: Yes, Parker H3 or H4 male and female quick disconnect & dust cap - sufficient enough to meet efficient fuel flow Yes, Parker H3 or H4 male and female quick disconnect & dust cap - sufficient enough to meet efficient fuel flow Diesel Engine Fluid (DEF) Tank: Internal storage, EPA approved to provide fluid to operate at full rated load Internal storage, EPA approved to provide fluid to operate at full rated load WARRANTY Engine Warranty: provide exact warranty hours/years in detailed specifications Industry Standard Warranty Industry Standard Warranty Generator Warranty: provide exact warranty hours/years in detailed specifications Industry Standard Warranty Industry Standard Warranty Trailer: (if applicable) 500kW and Above 500kW and Above OTHER REQUIREMENTS Unit Designed as a Portable Prime Power Unit (Not a Standby Unit Modified for Prime Power Use) Yes Yes Exhaust: Industrial Silencer/Muffler Industrial Silencer/Muffler Diagnostic/Troubleshooting: provide brief overview of diagnostic/troubleshooting in detailed specifications Diagnostics/Troubleshooting: The vendor SHALL provide any hardware and/or software, manuals or other documentation (in digital or hard copy), to include all diagnostic codes, that will enable FEMA Mechanics to perform all diagnostic's available for the generator(s) Diagnostics/Troubleshooting: The vendor SHALL provide any hardware and/or software, manuals or other documentation (in digital or hard copy), to include all diagnostic codes, that will enable FEMA Mechanics to perform all diagnostic's available for the generator(s) Miscellaneous: Fabrication and permanent attachment of exterior metal spacers/rub-knuckles to facilitate side by side (rub free) transportation Fabrication and permanent attachment of exterior metal spacers/rub-knuckles to facilitate side by side (rub free) transportation Height Requirements for Air Transportation: Want to max transportation versatility - C17 load height limit 104"; C130 load height limit 96" Want to max transportation versatility - C17 load height limit 104"; C130 load height limit 96" Delivery Timeline: provide information regarding meeting the FEMA delivery timeline requirement in detailed specifications; this is its own FACTOR 2 evaluation criteria but a requirement of the technical specifications NET: 60 days ARO; NLT: 120 days ARO NET: 60 days ARO; NLT: 120 days ARO 2. Price Quote Instructions a. Price Schedule - The offeror shall complete the Standard Form 18 at Section 11- Schedule to propose a firm fixed price inclusive of all costs and fee (profit) for each CLIN set forth in the Price Schedule, including shipping. The proposed firm fixed price shall be based on the requirements of the Attachment 1 SOW and the specifications under Attachment 2. Offerors may submit price quotes using the above price schedule format, or in their own normal commercial quote format as long as the above price schedule information is included. Price quotes should also include the offeror's company name, address, phone number, DUNS, CAGE Code, and reference the RFQ number (HSFE70-17-Q-0051). b. Representations, Certifications, and Other Statements of Offerors (FAR 52.212-3, Offeror Representations and Certifications-Commercial Items). This shall be completed by the offeror and submitted as part of the Quote. c. Responsibility (FAR 52.209-7 Information Regarding Responsibility Matters). This shall be completed by the offeror and submitted as part of the Quote. EVALUATION FACTORS FOR AWARD: 1.1 All items shall be quoted; incomplete quotes may not be considered. This is an "All or Nothing" acquisition. Award will be made on the basis of the lowest evaluated price of quotes meeting or exceeding the acceptability standards for non-cost factors. This acquisition will utilize the Lowest Priced Technically Acceptable (LPTA) procedure to make a best value award. A decision on the technical acceptability of each offeror's quotations will be made. For those offerors which are determined to be technically acceptable, award will be made to that vendor with the lowest overall price. The Government intends to evaluate quotes and award a purchase order without discussions with offerors (except clarifications). Therefore, the offeror's initial quote should contain the offeror's best terms from a cost or price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. Award will be made to the responsible offeror whose quotation conforms to all solicitation requirements, such as terms and conditions, representations and certifications, technical requirements, and also provides the best value to the Government based on the results of the evaluation described in paragraph 1.2 below. The Government reserves the right to make no award at all as a result of this solicitation. 1.2 The LPTA evaluation process will be accomplished as follows: Factor (1) Technical Acceptability: Each offeror's technical quotation shall be evaluated to determine if the generator proposed by the offeror meets the required specifications and delivery requirements as specified in Attachment 1 Statement of Work. An evaluation rating of Technically Acceptable/Unacceptable will be assigned upon completion of the technical quotation evaluation. If an offeror receives a technical rating of "Unacceptable" they will not be considered for award. DEFINITIONS/EVALUATION RATINGS: The Technical Acceptability factor will be evaluated against the stated criteria and the rating assigned to each individual technical factor using the following descriptive adjectival ratings: Acceptable The offeror's proposed generator meets or exceeds the minimum specifications as identified in Attachment 1 Statement of Work and Attachment 2 Generator Criteria Specifications. Unacceptable The offeror's proposed generator DOES NOT meet the minimum specifications as identified in Attachment 1 Statement of Work and Attachment 2 Generator Criteria Specifications. Factor (2) Delivery Schedule: Each offeror's delivery quote shall be evaluated to determine if the terms proposed by the offeror meets the minimum delivery requirement as specified in Section 2.4.2: Delivery Schedule in the Statement of Work. DEFINITIONS/EVALUATION RATINGS: The Delivery Schedule factor will be evaluated against the stated criteria and the rating assigned to each individual technical factor using the following descriptive adjectival ratings: Acceptable The offeror's proposed delivery terms meet or exceed the minimum specifications as identified in the Attachment 1 Statement of Work. Unacceptable The offeror's proposed delivery terms DO NOT meet the minimum specifications as identified in the Attachment 1 Statement of Work. Factor (3) Price Quotations: The offeror's price quote shall be evaluated, for award purposes, based upon total price proposed for the total requirement, including shipping. OFFEROR QUESTIONS: If you have any questions, please contact Amanda Morgan by email at: Amanda.Morgan.2@fema.dhs.gov. Questions shall be submitted no later than 10:00 a.m. (Eastern Standard Time) on August 30, 2017. No phone calls will be accepted. Questions submitted after this deadline may not receive a response. QUOTE SUBMISSION INSTRUCTIONS: Your Original Quote (Technical and Price) including all supporting documentation shall be submitted electronically by email (using PDF, MS Word, and/or MS Excel) to Amanda Morgan, Amanda.Morgan.2@fema.dhs.gov, not later than 10:00 a.m. (Eastern Standard Time) on September 8, 2017.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/FEMA/OAMOPSDA/HSFE70-17-Q-0051/listing.html)
Place of Performance: Address: Multiple Delivery Locations, See Schedule, United States
Record: SN04646262-W 20170826/170824233135-62ec8362a2ae34ba8b6ef908f52e97ab (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

53 -- Generators - Package #1