Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 02, 2017 FBO #5762
SOLICITATION NOTICE

76 -- Labor Law Legal Publications - MAXWELL F2XTA17194A001

Notice Date

8/31/2017
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

323117 — Books Printing
 

Contracting Office

Department of the Air Force, Air Education and Training Command, Maxwell AFB Contracting Squadron, 50 LeMay Plaza South, Bldg 804, Maxwell AFB, Alabama, 36112-6334
 

ZIP Code

36112-6334
 

Solicitation Number

MAXWELL-F2XTA17194A001
 

Archive Date

9/23/2017
 

Point of Contact

Michael E. Grayson, Phone: 334-953-0530, Marcus Abram, Phone: 334-953-5530
 

E-Mail Address

michael.grayson.4@us.af.mil, marcus.abram@us.af.mil
(michael.grayson.4@us.af.mil, marcus.abram@us.af.mil)
 

Small Business Set-Aside

Woman Owned Small Business
 

Description

Labor Law Legal Publications GENERAL INFORMATION The 42nd Contracting Squadron has a requirement to purchase the Books specified in the Schedule of Supplies/Services. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement is issued as a Request for Quote (RFQ) (Reference-Number MAXWELL -F2XTA17194A001). The solicitation document and incorporated provisions and clauses are those in effect in the Federal Acquisition Circular 2005-95 (19 Jan 2017) and the DPN 20161222 effective 22 Dec 2016. A firm-fixed priced will be awarded in accordance with the following: NAICS Code: 323117; size standard: 1,250 employees IMPORTANT NOTE: 1. THE GOVERNMENT IS SOLICITING FOR "OPEN MARKET" QUOTES "FROM WOMEN OWNED SMALL BUSINESSES (WOSP)" ONLY. GENERAL SERVICES ADMINISTRATION (GSA) QUOTES WILL NOT BE CONSIDERED. 2. ALL PRODUCTS MUST BE NEW; NO REFURBISHED OR USED ITEMS WILL BE ACCEPTED. NATURE OF ACQUISITON: This is a requirement for the purchase of books listed in item numbers 0001 - 0004 in support of the Air Force Legal Operations Agency, Maxwell AFB, AL. This requirement will be solicited for full and open competition as a single firm-fixed price contract. All inquiries/responses to this notice must be received by 8 Sep 2016, 2 P.M. CDT. SCHEDULE OF SUPPLIES/SERVICES: This acquisition is for the purchase of the following items: Item No. Description of Requirement Quantity 0001 Books, Guide to FLRA Law and Practice, ISBN 1-941825-32-X, 2017 Edition 12 0002 Books, Guide to Merit System Protection Board, ISBN: 1-941825-31-1, 2017 Edition 23 0003 Books, Guide to Federal Sector EEO, Law & Practice ISBN: 1-941825-33-8, 2017 Edition 22 0004 Books, 17MSCP MSPB Charges and Penalties 2 DELIVERY INFORMATION The Books shall be delivered in accordance with Attachment 1 Delivery Addresses. QUOTATION PREPARTION INSTRUCTIONS To ensure timely and equitable evaluation of quotes, vendors must comply with instructions contained herein. Quotes must be complete, self-sufficient, and respond directly to the requirements of this RFQ. a. The offeror must submit a dated quote with unit prices and extended prices in response to this solicitation. In doing so and without taking any exception to the requirements of this synopsis/solicitation, "Schedule of Supplies/Services" and terms and conditions, the offeror accedes to all solicitation requirements. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. b. Specifications: The contractor shall provide detailed specifications that clearly meet the minimum requirements referenced in CLIN 0001 - 0004. c. Project Milestone Plan (PMP): The delivery date shall be expressed in terms of "days after contract award" and take into consideration availability, ordering and shipping. If applicable, the offeror shall specify other availability factors such as out of print, out of stock, not yet printed, back order, print on demand and any other factors that could affect the delivery of the items proposed under this solicitation. Delivery date will be incorporated into the contract. Description Days after Delivery Order Product Delivery d. Offerors must include a completed copy of the provisions at FAR 52.212-3, Alternate I, Offeror Representations and Certifications - Commercial Items. e. Interested parties capable of providing the requirement must include discount terms, tax identification number, cage code, and DUNS. f. To be eligible to receive an award resulting from this RFQ, contractors must be registered in the DoD Systems for Award Management database, no exceptions. To register, please visit http://www.sam.gov or by calling 1-866-606-8220. g. Responses to this notice shall be provided in writing via e-mail to Mr. Michael Grayson at michael.grayson.4@us.af.mil and Mr. Marcus Abram at marcus.abram@us.af.mil. All responses shall be received NLT 2 P.M. CDT on 8 Sep 2017. Email is the preferred method. Points of Contact: Mr. Michael Grayson, Contract Specialist, Phone (334) 953-0530, Fax (334) 953-3543 and Mr. Marcus Abram, Contracting Officer, Phone (334) 953-3526. IMPORTANT NOTE: Neither Multiple Offerors nor Multiple Awards will be considered. A single award will be made in the resultant contract. BASIS FOR AWARD 1.0 Award will be based on technical acceptability and price. For quotes determined technically acceptable, a best value selection will be based on price. 1.1 Technical Acceptability: Initially, the Government's technical evaluation team shall evaluate each contractor's quote against the following technical criteria: 1.1.1 Specification: The detailed specification will be evaluated for completeness to ensure the minimum requirements referenced in CLIN(s) 0001 - 0004 are met. 1.1.2 Project Milestone Plan (PMP): The PMP will be evaluated to ensure a reasonable timeline is established from issuance of the contract to the delivery location identified in this solicitation. The PMP shall be expressed in terms of "days after contract" and include, at a minimum, the milestones described in the Instructions to Offerors. Quotes will be assigned the following technical ratings: Acceptable: Clearly meets the minimum requirement or Unacceptable: Does not clearly meet the minimum requirements 2.0 Price. The Government may use any of the following price analysis techniques IAW FAR 13.106-3(a) to determine price reasonableness: competitive quotes, comparison of the proposed price with prices found reasonable on previous purchases, a comparison with similar items in a related industry, comparison to an independent Government estimate, or any other reasonable basis. CLAUSES INCORPORATED BY REFERENCE 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) 52.204-13 System for Award Management Maintenance (Oct 2016) 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) 52.212-4 Contract Terms and Conditions--Commercial Items (Jan 2017) 52.219-4 Notice of Price Evaluation for HUBZone Small Business Concerns (Oct 2014) 52.219-28 Post-Award Small Business Program Rerepresentation (Jul 2013) 52.222-19 Child Labor -- Cooperation with Authorities and Remedies (Feb 2016) 52.222-22 Previous Contracts and Compliance Reports (Feb 1999) 52.222-26 Equal Opportunity (Sep 2016) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.225-13 Restrictions on Certain Foreign Purchases (Jun 2008) 52.232-33 Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) 52.233-3 Protest after Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.203-7002 Requirements to Inform Employees of Whistleblower Rights (Sep 2013) 252.204-7003 Control Of Government Personnel Work Product (Apr 1992) 252.204-7012 Safeguarding of unclassified controlled technical information (Oct 2016) 252.223-7008 Prohibition of Hexavalent Chromium (JUN 2013) 252.225-7001 Buy American and Balance of Payments Program (Dec 2016) 252.225-7002 Qualifying Country Sources as Subcontractors (Dec 2016) 252.225-7036 Buy American-Free Trade Agreements--Balance of Payments (Dec 2016) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Jun 2012) 252.232-7010 Levies on Contract Payments (Dec 2006) 252.243-7001 Pricing Of Contract Modifications (Dec 1991) 252.244-7000 Subcontracts for Commercial Items (Jun 2013) 252.247-7023 Transportation of Supplies by Sea (Apr 2014) CLAUSES INCORPORATED BY FULL TEXT 252.211-7003 Item Unique Identification and Valuation (Mar 2016) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert "See Schedule" in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause) FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEVIATION 2013-O0019) (JAN 2017) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (v) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). (ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212). (x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67). (xii) ____ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). ___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627). (xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.) (xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xv) 52.222-54, Employment Eligibility Verification (Oct 2015). (xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658). (xvii) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (Oct 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (b)(1)(xvi): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction. (xviii) 52.222-60, Paycheck Transparency (Executive Order 13673) (Oct 2016). (xix) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xx) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xxi) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). Invoice and Receiving Report (Combo) (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. Inspection location: 51 East Maxwell Blvd. BLDG 678, Maxwell AFB 36112 Acceptance location: 51 East Maxwell Blvd. BLDG 678, Maxwell AFB 36112 (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* -------------------------------------------------------------------------------------------- Field Name in WAWF Data to be entered in WAWF -------------------------------------------------------------------------------------------- Pay Official DoDAAC F87700 Issue By DoDAAC FA3300 Admin DoDAAC FA3300 Inspect By DoDAAC F2XTA1 Ship To Code F2XTA1 Ship From Code Not applicable. Mark For Code Not applicable. Service Approver (DoDAAC) Not applicable. Service Acceptor (DoDAAC) F2XTA1 Accept at Other DoDAAC Not applicable. LPO DoDAAC Not applicable. DCAA Auditor DoDAAC Not applicable. Other DoDAAC(s) Not applicable. -------------------------------------------------------------------------------------------- (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. michael.grayson.4@us.af.mil marcus.abram@us.af.mil (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. Not applicable. (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of clause) 5352.201-9101 OMBUDSMAN (JUN 2016) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman Deputy Director of Contracting, AFICA/KT (OL-AET), 2035 First Street West, JBSA Randolph TX 78150-4304, telephone 210-652-1722 (DSN 487-1722) Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. PROVISIONS INCORPORATED BY REFERENCE 52.204-7 System for Award Management (Oct 2016) 52.212-1 Instructions to Offerors--Commercial Items (Jan 2017) 252.204-7004 Alt A System for Award Management Alternate A (Feb 2014) 252.204-7011 Alternative Line Item Structure (SEP 2011) PROVISIONS INCORPORATED BY FULL TEXT 52.212-3, Alt 1 Offeror Representations And Certifications--Commercial Items (Jan 2017) Alternate I (Oct 2014) Offerors are reminded that Representations and Certifications are maintained at the following website: https://www.sam.gov/. In the event Representations and Certifications are not on file, Offerors must include a completed copy of the provisions at FAR Part 52 or on on-line at http://farsite.hill.af.mil. (May 2014) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (b) through (i) of this provision. (End of provision) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): http://farsite.hill.af.mil/farsite.html (End of provision) ATTACHMENT Attachment1: Delivery Addresses Delivery Addresses for Air Force Legal Operations Agency GUIDE TO FLRA LAW & PRACTICE, 2017 EDITION (12) Copies: 1 460 SW/JA 510 S. Aspen St., Suite 230 Buckley AFB, CO 80011-9572 Copies: 1 96 TW/JA 501 W. Van Matre Ave., Ste 1 Eglin AFB, FL 32542-5487 Copies: 1 28 BW/JA 1000 Ellsworth St Ste 2700 ELLSWORTH AFB SD 57706-4700 Copies: 7 AFLOA/JACL 1500 W. Perimeter Rd Ste 1370 Joint Base Andrews, MD 20762 Copies: 1 AFMC/JA 4225 Logistics Ave, Bldg 266, Room N237 WPAFB OH 45433-5762 Copies: 1 88 ABW/JA 5135 Pearson Rd Bldg 10 Rm 107A WPAFB OH 45433 GUIDE TO MERIT SYSTEM PROTECTION BOARD (MSPB), 2017 EDITION (23) Copies: 1 460 SW/JA 510 S. Aspen St., Suite 230 Buckley AFB, CO 80011-9572 Copies: 1 96 TW/JA 501 W. Van Matre Ave., Ste 1 Eglin AFB, FL 32542-5487 Copies: 1 28 BW/JA 1000 Ellsworth St Ste 2700 ELLSWORTH AFB SD 57706-4700 Copies: 1 49 WG/JA 490 First Street Ste 1940 Holloman AFB, NM 88330 Copies: 1 673 ABW/JA 8517 20th Street Ste 330 JBER AK 99506-2470 Copies: 16 AFLOA/JACL 1500 W. Perimeter Rd Ste 1370 Joint Base Andrews, MD 20762 Copies: 1 AFMC/JA 4225 Logistics Ave, Bldg 266, Room N237 WPAFB OH 45433-5762 Copies: 1 88 ABW/JA 5135 Pearson Rd Bldg 10 Rm 107A WPAFB OH 45433 GUIDE TO FEDERAL SECTOR EEO, 2017 EDITION (22) Copies: 1 460 SW/JA 510 S. Aspen St., Suite 230 Buckley AFB, CO 80011-9572 Copies: 1 96 TW/JA 501 W. Van Matre Ave., Ste 1 Eglin AFB, FL 32542-5487 Copies: 1 28 BW/JA 1000 Ellsworth St Ste 2700 ELLSWORTH AFB SD 57706-4700 Copies: 1 673 ABW/JA 8517 20th Street Ste 330 JBER AK 99506-2470 Copies: 16 AFLOA/JACL 1500 W. Perimeter Rd Ste 1370 Joint Base Andrews, MD 20762 Copies: 1 AFMC/JA 4225 Logistics Ave, Bldg 266, Room N237 WPAFB OH 45433-5762 Copies: 1 88 ABW/JA 5135 Pearson Rd Bldg 10 Rm 107A WPAFB OH 45433 MSPB Charges & Penalties Copies: 2 AFLOA/JACL 1500 W. Perimeter Rd Ste 1370 Joint Base Andrews, MD 20762
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AETC/MaxAFBCS/MAXWELL-F2XTA17194A001/listing.html)
 

Place of Performance

Address: Maxwell AFB, Montgomery, Alabama, 36112, United States

Zip Code: 36112
 

Record

SN04657414-W 20170902/170831233826-44adcb1e387af775bcc6d72a2938eae7 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |