MODIFICATION
66 -- Precision Electromechanical Slow Strain Rate Tensile Testing System
- Notice Date
- 9/6/2017
- Notice Type
- Modification/Amendment
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- SB1341-17-RQ-0833-1
- Archive Date
- 9/23/2017
- Point of Contact
- Heather Bauer, Phone: 3019752752
- E-Mail Address
-
heather.bauer@nist.gov
(heather.bauer@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- The purpose of this amendment is to extend the quote submission due date to 1:00PM on Friday, September 8, 2017 and to include Qutesions and Answers. Question 1 : What are the model numbers of the boards that plug into that chassis? Answer 1 : There are no boards. The device is external and uses a USB to communicate with the controller. The only concern is the compatibility with the NI software - NIST needs the Slow Strain Rate control system to run the NI-Max software (or equivalent) to read the signals. Question 2 : What are the model numbers of the modules plugged into that chassis? Answer 2 : NIST has 1 NI-9215 with a terminal block fixture and 2 NI-9215 with BNC fixtures. All 3 are ± 10 VDC input. NIST does not have any other plugins for that unit at this time. --------------------------------------------------------------------- COMBINED SYNOPSIS/SOLICITATION SB1341-17-RQ-0833 Precision Electromechanical Slow Strain Rate Tensile Testing System This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 - Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation document will not be issued. This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-95 effective 1/19/2017. The associated North American Industrial Classification System (NAICS) code for this procurement is 333517 with a small business size standard of 500 employees. This acquisition is being procured as full and open competition. Delivery The system must be delivered and installed within 70 days of the date of award. The items shall be shipped F.O.B. Destination to: The National Institute of Standards and Technology 100 Bureau Drive Building 301 Gaithersburg, MD 20899 FOB DESTINATION MEANS: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. EVALUATION CRITERIA AND BASIS FOR AWARD The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, is the lowest price, technically acceptable quotation. Technically acceptable means that the Contractor provides a system that meets the requirements specified in the Statement of Work, and the requirements of all Line Items. If a Contractor does not indicate how its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. Price will be evaluated to determine that total price is consistent with the technical portion of the quotation and is a fair and reasonable overall price to the Government. NIST intends to evaluate quotes and issue a contract based on the initial quotes received. Therefore, the Contractor's initial quote should contain the Contractor's best terms from a price and technical standpoint. NIST reserves the right to request revised quotes from, or negotiate final contract terms with, one or more, but not all, Contractors if later determined by the Contracting Officer to be necessary. REQUIRED SUBMISSIONS All Contractors shall submit the following: 1.For the purpose of evaluation of Technical Acceptability: Documentation that confirms the contractor is capable of providing the equipment specified in the statement of work. Contractors shall include a copy of the quoted system's manufacturer's specifications. 2.Contractors shall provide pricing for the following line items. All equipment must be new. Used or remanufactured equipment will not be considered for award. Line Item 001: Quantity of one (1) table top Slow Strain Rate Test System in accordance with the Statement of Work. Line Item 002: Installation of all equipment parts in accordance with the Statement of Work. Line Item 003: Training for up to 2 NIST personnel to demonstrate normal operation, troubleshooting, and routine maintenance in accordance with the Statement of Work. Line Item 004: Additional Equipment in accordance with the Statement of Work. -Low profile Tension/Compression rated load cell -Wedge Grips -Computer -Digital control software package -Multichannel Data Acquisition System Line Item 005: Warranty in accordance with the Statement of Work. 3.A completed version of all required solicitation provisions (see attached provisions/clauses document - required submissions highlighted in blue). 4.If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order. 5.Contractors shall provide an active DUNS # for the System for Award Management (SAM) registration. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor's FSS or GWAC contract, and the statement required above shall be included in the quotation; DUE DATE FOR QUOTATIONS All quotations must be submitted via e-mail to Heather Bauer, Contract Specialist at Heather.Bauer@nist.gov. Submission must be received not later than 11:00 a.m. Eastern Time on Thursday 31 August 2017. A quotation shall be considered received when it is received in the electronic inbox of Heather Bauer no later than the date and time identified herein. At this time, the question period is closed. PROVISIONS AND CLAUSES: The clauses and provisions applicable to this solicitation can be found under Applicable Clauses & Provisions. The full text of a FAR provision or clause may be accessed electronically at https://farsite.hill.af.mil or www.acquisition.gov/far. The full text of a CAR provision or clause may be accessed electronically at https://farsite.hill.af.mil or http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. The Statement of Work 2. Applicable Clauses & Provisions
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-17-RQ-0833-1/listing.html)
- Record
- SN04665083-W 20170908/170906233701-0da38ce5ebd9b46fba7e5893abb705c5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |