SOLICITATION NOTICE
42 -- Compact Cable Padlock
- Notice Date
- 9/21/2017
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 5450 Carlisle Pike, Mechanicsburg, PA 17055
- ZIP Code
- 17055
- Solicitation Number
- N0010417QX107
- Response Due
- 10/2/2017
- Archive Date
- 3/31/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N0010417QX107 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 561621 with a small business size standard of $20.50M. This requirement is unrestricted and only qualified offerors may submit quotes. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-10-02 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Loxley, AL 36551 The WSS - Mechanicsburg requires the following items, Brand Name or Equal, to the following: LI 001: N2979272431040 Brady Part Number: 146132 Safety padlocks Featuring an elongated, flexible cable, these padlocks are more versatile than standard safety padlocks, providing a multi-purpose solution. Flexible cable allows for effective lockout in tight spaces such as breaker cabinets or simultaneous lockout of several energy isolation points. Complies with all OSHA requirements and makes it possible to secure several breaker lockouts simultaneously, 90, EA; LI 002: N2979272431041 Brady Part Number: 51195 36 lock board with safety padlocks Dimensions: 21.5 inch High by 23.5 inches wide by 0.1875 inches deep. Made of 3/16" thick bright yellow acrylic with acrylic lock rails and clear polycarbonate tag pockets that accommodate tags up to 3" wide, 1, EA; LI 003: N2979272431042 Brady Part Number: 51339 Padlocks feature lightweight, nonconductive fiberglass-reinforced nylon bodies, hardened steel shackles and tamper-resistant 6-pin cylinders. Each padlock is keyed differently with keys precision-machined to exacting standards, so that the key for one lock will not open another in the set., 60, EA; LI 004: N2979272431048 Brady Part Number: 65376 Hasps are constructed of vinyl-coated high tensile steel with rust-resistant plating. Hasps allow multiple padlocks to secure a single lockout device. Dimensions 4.5 in H x 2.25 in W x 0.35 in D Pack of 12 Each Inside Jaw Size 1.5 in Maximum Number of Padlocks 6 Maximum Shackle Diameter (in/ft/yd) 0.4 in Number of Jaws 1 Body Color Red Coating Material Rust-Proof Plating, Vinyl-Coated Material Steel., 24, EA; LI 005: N2979272431050 Brady Part Number: 65590 made of extremely rugged injection-molded polypropylene for superior impact and chemical resistance. Accepts padlock shackles up to 3/8 in. in diameter. Dimensions 2.78 in Dia Gate Valve Lockout Type Hinged Lockout Color Yellow Lockout Height (in/ft/yd) 1.41 in Lockout Width (in/ft/yd) 4.72 in Maximum Number of Padlocks 1 Maximum Service Temperature °F 302 °F Maximum Shackle Diameter (in/ft/yd) 0.375 in Minimum Service Temperature °F -40 °F Service Temperature Range °F -40 °F to 302 °F Valve Wheel Diameter Range (in/ft/yd) 1 to 2.5 in Lockout Material Polypropylene. Text Legend DANGER LOCKED OUT DO NOT REMOVE, 30, EA; LI 006: N2979272431051 Brady Part Number: 65591 Device is made of extremely rugged injection-molded polypropylene for superior impact and chemical resistance. Accepts padlock shackles up to 3/8 in. in diameter. Diameter (in/ft/yd) 5.2 in Dimensions 5.2 in Dia Lockout Color Yellow Lockout Height (in/ft/yd) 2 in Lockout Width (in/ft/yd) 7.28 in Maximum Number of Padlocks 1 Maximum Service Temperature °F 302 °F Maximum Shackle Diameter (in/ft/yd) 0.375 in Minimum Service Temperature °F -40 °F, 30, EA; LI 007: N2979272431052 Brady Part Number: 65592 Device is made of extremely rugged injection-molded polypropylene for superior impact and chemical resistance Accepts padlock shackles up to 3/8 in. in diameter Diameter (in/ft/yd) 6.75 in Dimensions 6.75 in Dia Gate Valve Lockout Type Hinged Lockout Color Yellow Lockout Height (in/ft/yd) 2.38 in Lockout Width (in/ft/yd) 8.82 in Maximum Number of Padlocks 1 Maximum Service Temperature °F 302 °F Maximum Shackle Diameter (in/ft/yd) 0.375 in Minimum Service Temperature °F -40 °F Rising Stem Knockout Hole Diameter (in/ft/yd) 2.5 in Service Temperature Range °F -40 to 302 Valve Wheel Diameter Range (in/ft/yd) 5 to 6.5 in Lockout Material Polypropylene Text Legend DANGER LOCKED OUT DO NOT REMOVE 2-92001DN04 LOCKOUT/TAGOUT SYSTEM, 30, EA; LI 008: N2979272431053 Brady Part Number: 65593 Gate valve lockout devices deny access and cover the valve handle. This device's unique knockout center fits OS&Y or "rising stem" valves. Device is made of extremely rugged injection-molded polypropylene for superior impact and chemical resistance. Diameter (in/ft/yd) 10.52 in Dimensions 10.52 in Dia Gate Valve Lockout Type Hinged Lockout Color Yellow Lockout Height (in/ft/yd) 3 in Lockout Width (in/ft/yd) 12.53 in Maximum Number of Padlocks 1 Maximum Service Temperature °F 302 °F Maximum Shackle Diameter (in/ft/yd) 0.375 in Minimum Service Temperature °F -40 °F Rising Stem Knockout Hole Diameter (in/ft/yd) 3.52 in Service Temperature Range °F -40 to 302 Valve Wheel Diameter Range (in/ft/yd) 6.5 to 10 in 2-92001DN04 LOCKOUT/TAGOUT SYSTEM, 30, EA; LI 009: N2979272431054 Brady Part Number: 65594 Gate valve lockout devices deny access and cover the valve handle. This devices unique knockout center fits OS&Y or "rising stem" valves. Device is made of extremely rugged injection-molded polypropylene for superior impact and chemical resistance. Diameter (in/ft/yd) 13.96 in, Dimensions 13.96 in Dia, Lockout Color Yellow, Lockout Height (in/ft/yd) 3 in, Lockout Width (in/ft/yd) 15.95 in,Maximum Service Temperature °F 302 °F, Maximum Shackle Diameter (in/ft/yd) 0.375 in, Minimum Service Temperature °F -40 °F, DANGER LOCKED OUT DO NOT REMOVE., 6, EA; LI 010: N2979272431060 Brady Part Number: 65975 The permanent front- and back-side labels on these aluminum hasps include a write-on area that accepts pen, pencil and permanent marker, Hasps allow multiple padlocks to secure a single lockout device. Dimensions 7.512 in H x 0.309 in W x 0.157 in D, Display UoM Pack of 5 Each,Inside Jaw Size 1.429 in, Label Attached, Maximum Number of Padlocks 6, Maximum Shackle Diameter (in/ft/yd) 0.3125 in, 1 Jaw 2-92001DN04 LOCKOUT/TAGOUT SYSTEM, 20, EA; LI 011: N2979272431064 Brady Part Number: 99021 Heavy-duty steel key cabinets, Beige, Powder-Coated, (10) Checkout Tags;Snap Hook Key Tags, Dimensions 20.5 in H x 16.5 in W x 4.125 in D, Two keys are supplied for each cabinet lock 2-92001DN04 LOCKOUT/TAGOUT SYSTEM, 1, EA; LI 012: N2979272431065 Brady Part Number: 99023 Extra blank key tags and clips for use with lockable metal key cabinets. Color White Material Fiberboard. 2-92001DN04 LOCKOUT/TAGOUT SYSTEM, 100, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, WSS - Mechanicsburg intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. WSS - Mechanicsburg is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a quote on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 60 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. SYSTEM FOR AWARD MANAGEMENT (JUL 2013) SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (JUL 2013) PROHIBITION ON CONTRACTING WITH ENTITIES IN CERTAIN ACTIVITIES OR TRANSACTIONS RELATING TO IRAN - REPRESENTATIONS AND CERTIFICATIONS (OCT 2015) CHANGES - FIXED-PRICE (AUG 1987) INSPECTION OF SUPPLIES - FIXED-PRICE (AUG 1996) CLAUSES INCORPORATED BY REFERENCE (FEB 1998) REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS-REPRESENTATION (DEVIATION 2015-O0010) (FEB 2015) COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (DEC 2015 ALTERNATIVE LINE ITEM STRUCTURE (SEP 2011) SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (AUG 2015) NOTICE OF INTENT TO RESOLICIT (JUN 2012) ONLY ONE OFFER (OCT 2013) BUY AMERICAN ”BALANCE OF PAYMENTS PROGRAM CERTIFICATE ”BASIC (NOV 2014) BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM ”BASIC (NOV 2014) LEVIES ON CONTRACT PAYMENTS (DEC 2006)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N000104/N0010417QX107/listing.html)
- Place of Performance
- Address: Loxley, AL 36551
- Zip Code: 36551-0500
- Zip Code: 36551-0500
- Record
- SN04689097-W 20170923/170921232105-6cf57a16fa58ae856a44fd5eb60a3516 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |