Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF OCTOBER 19, 2017 FBO #5809
SOURCES SOUGHT

14 -- POWER SOURCE FOR INTELLIGENCE TELEMETRY INSTRUMENTATION KIT (ITIK) REQUEST FOR INFORMATION

Notice Date
10/17/2017
 
Notice Type
Sources Sought
 
NAICS
335912 — Primary Battery Manufacturing
 
Contracting Office
Department of the Air Force, Air Force Materiel Command, AFLCMC/EBJK - Eglin, 205 West D Ave, Bldg 350, Ste 632, Eglin AFB, Florida, 32542, United States
 
ZIP Code
32542
 
Solicitation Number
FA868212C0006P00064
 
Archive Date
12/2/2017
 
Point of Contact
Sharelle Bateman,
 
E-Mail Address
Sharelle.bateman.1@us.af.mil
(Sharelle.bateman.1@us.af.mil)
 
Small Business Set-Aside
N/A
 
Description
POWER SOURCE FOR INTELLIGENCE TELEMETRY INSTRUMENTATION KIT (ITIK) REQUEST FOR INFORMATION The Department of Defense, United States Air Force (USAF), Air Force Materiel Command (AFMC), Air Force Life Cycle Management Center (AFLCMC), Armament Directorate, is currently conducting market research seeking capabilities statement from potential sources, including small businesses (SB), 8(a), HUBZone, Economically Disadvantaged Woman-Owned (EDWOSB), Woman-Owned (WOSB), Service Disabled Veteran Owned (SDVOSB) small business that provides a power source for an Intelligent Telemetry Instrumentation Kit (iTIK) for USAF and USN. The current system requires a Flight Termination Systems Commonality Standard RCC 319-14, 1200 mAH minimum capacity, 24 to 36 VDC operational (23V minimum under pulse loads) power to operate the system. The following questions must be answered: A. Lowest / Highest temperature power source can operate a. Objective values: -55C to +71C B. System dimensions (must not exceed 6.26 in x 3.75 in x 1.34 in) C. System weight (must not exceed 2.25 pounds) D. Max charge capacity E. Charge / Discharge rate F. If rechargeable a. Charger type (Continuous / Pulse / Other) G. Can the contractor manufacture a minimum of 20 power sources/month? Can the contractor deliver fully qualified units within 8 months after contract award? All interested vendors shall submit a response demonstrating their capability to provide these items to the Primary Point of Contact listed below. Proposals are not being requested or accepted at this time. As stipulated in FAR 15.201(e), responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation (Request for Proposal) exists at this time; therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government's discretion. The NAICS Code assigned to this acquisition is 335912, "Primary Battery Manufacturing," with a size standard of 1,000 persons. Respondents should indicate their size in relation to this size standard and indicate socio-economic status (i.e. SB, 8(a), HUBZone, EDWOSB, WOSB, or SDVOSB). Respondents are further requested to indicate their status as a Foreign-owned/Foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a DoD contract. No set-aside decision has been made. Note that a key factor in determining an acquisition to be a Small Business Set Aside is that small business prime contractors must perform at least 50% of the effort, as defined in FAR Clause 52.219-14. Any information submitted by respondents to this sources sought is voluntary. This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business, or any particular small business program. CAPABILITIES STATEMENT: All interested vendors shall submit a capabilities statement that explicitly demonstrates their capability to provide/perform the requirement stated in this notice. The capabilities statement should be brief and concise, yet clearly demonstrate an ability to meet the stated requirement. The response must not exceed 15 pages. Small businesses with only partial capabilities of this requirement are encouraged to submit their capabilities statement demonstrating the portion of the requirement they are capable of providing/performing. This information will allow the Government to identify areas of possible breakout or possible subcontracting opportunities. Responses may be submitted electronically to the following e-mail address listed below: All correspondence sent via email shall contain a subject line that reads "FA8682-12-C-0006 P00064 ALTERNATE POWER SOURCE." If this subject line is not included, the e-mail may not get through e-mail filters at Eglin AFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachment. Attachments with files ending in.zip or.exe are not allowable and will be deleted. Ensure only.pdf,.doc,.docx,.xsls, or.xls documents are attached to your email. All other attachments may be deleted. All responsible sources may submit information that shall be considered by the agency. If late information is received, it may be considered, depending on agency time constraints. All routine communications regarding the announcement should be directed to the contractual point of contact listed in this posting. The Government may or may not use any responses to this sources sought as a basis for a subsequent project/requirement. Any project/requirement developed from the sources sought responses may be the subject of a subsequent acquisition; any such subsequent acquisition will be posted in FedBizOpps.gov separately. Responses to this sources sought will not be returned. The Government is under no obligation to acknowledge receipt of the information received, or provide feedback to the respondents with respect to any of the information submitted under this sources sought. No requests for a bid package or solicitation will be accepted; a bid package or solicitation does not exist at this time. In order to protect the integrity of any possible future acquisition, no additional information will be provided and no appointments for presentations will be made in reference to this sources sought. Only government employees will review submitted responses to this sources sought. Respondents are advised that employees of commercial firms under contract with the Government may be used to administratively process submissions and perform other administrative duties requiring access to other contractor's proprietary information. These administrative support contractors include nondisclosure agreements prohibiting their contractor employees from disclosing any information submitted by other contractors or using such information for any purpose other than that for which it was furnished. RESPONSES ARE DUE NO LATER THAN 3:00 P.M. (CST) ON 17 November 2017. Direct all questions concerning this requirement to Sharelle Bateman at sharelle.bateman.1@us.af.mil
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/bde21603d9d65715e02d8485d726a301)
 
Place of Performance
Address: 205 West D Ave, Bldg 350, Ste 632, Eglin AFB, Florida, 32542, United States
Zip Code: 32542
 
Record
SN04715729-W 20171019/171017231238-bde21603d9d65715e02d8485d726a301 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.