SOURCES SOUGHT
J -- USS CORONADO (LCS-4) Dry Docking Availability
- Notice Date
- 10/20/2017
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, South West Regional Maintenance Center, 3755 Brinser Street, San Diego, California, 92136, United States
- ZIP Code
- 92136
- Solicitation Number
- N55236-18-R-CORONADO
- Archive Date
- 11/15/2017
- Point of Contact
- Dawn Redman, Phone: (619) 556-1221, MARIANITO J. ROSAL, Phone: (619)556-1154
- E-Mail Address
-
dawn.redman@navy.mil, marianito.rosal@navy.mil
(dawn.redman@navy.mil, marianito.rosal@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a Source Sought Notice - Request for Information (RFI). This is not a solicitation announcement for proposals and no contract will be awarded from this announcement. No reimbursement will be made for any cost associated with providing information in response to this announcement or any follow-up information requests. The Southwest Regional Maintenance Center (SWRMC) San Diego, CA seeks information from West coast sources that can support the USS CORONADO Dry-docking Selected Restricted Availability. The controlling work items are: 1. Provide and manage Schedule and Associated Reports 2. Installation of ShipAlt LCS4-87366K Structural Stanchion Modification; accomplish 3. Installation of ShipAlt LCS4-87456K Air Conditioning Plants No. One, 2 and 3; replace 4. Waterjet Assembly No. 1 through 4; inspect and repair 5. Main Propulsion Diesel Engine (MPDE) Diaphragm Coupling; replace 6. Stern Tube Shaft Seal Assemblies, Water Jet No. One through 4; overhaul 7. Water Jet, One through 4 Thrust Bearing Block Roller Bearings and Thrust Bearing Block Seals; inspect and replace 8. 100 % Preservation of Underwater Hull 9. 100% preservation of the flight deck non-skid 10. Accomplish Temporary Service, Equipment and Systems Test, Inspection and Repair in Contractor Plant, Barge 11. Accomplish Dry-docking and Undocking 12. Underwater Hull Slot Weld Repair; accomplish 13. 2 (each) Ride Control, T-Max Assembly Foil; inspect 14. 4 (each) Ride Control Stabilizer Fins and Ailerons; inspect 15. Ride Control Stabilizer Aileron Fin Hydraulic Cylinders; repair 16. Ride Control Interceptor Rod End Bearings, Skeg Bearings and Capping Plates; inspect and replace 17. Sea Chest Strainer 12 Inch Suction Valves and 10 Inch Overboard Discharge Valves; replace 18. Underwater Hull Slot Weld Repair; accomplish 19. Provide Ship's Force Transportation 20. Provide Ship's Force Parking The USS CORONADO (LCS 4) will require an estimated 263 days for the availability of which, 118 days in dry dock. The Dry dock must be Navy certified. The projected availability dates are 19 MAR 2018 through 7 DEC 2018. Other considerations for this docking: The USS CORONADO is displacing (weighing) 3,006 long tons. The certified lifting of the dry dock would handle that on a tons per foot basis. The draft of the ship, including the projections of the bow thruster and water jets is at 14.4 ft. The docking will require a 2307mm clearance required below amidships keel extended for TMAX rudder removal. The USS CORONADO is a Littoral Combat Ship (tri hull variant). Dimensions are: Length Overall: 419 feet. Breadth: 106 feet Depth: 14.4 feet This RFI is open to all business concerns that are qualified under the North American Industry Class System (NAICS) code 336611 (Shipbuilding and Repairing). All interested sources are requested to provide answers to the following: I. General Information 1. Name and address to include point of contact (phone number and email address). 2. Business Size- Large or Small 3. If Small Business, identify status (e.g., woman owned, veteran, HUBZone, or 8(a)) 4. Commercial and Entity Code (CAGE) 5. Dun and Bradstreet Number (DUNS) II. Docking Availability Information 1. What is the size of the dry-dock facility? 2. Is the dry-dock certified by the Navy? 3. Is your facility available during the above mentioned timeframe? If not, when is it available? Where exactly is the dry-dock located? Responses to this RFI may be submitted by hard copy or email to dawn.redman@navy.mil not later than 2:00 PM (PST) on 31 October 2017. Alternate point of contact is marianito.rosal@navy.mil. Remit any and all responses as an attachment to the initial email. Any questions regarding this RFI may be directed to the email addresses listed above. Please note that the Government reserves the right to only answer questions on a direct basis with the inquiring source. MAIL TO: Southwest Regional Maintenance Center (SWRMC) ATTN: Code 400E (Dawn Redman) Bldg 3339- Room 237 3755 Brinser Street San Diego, CA 92136 THE SUBMISSION OF THIS INFORMATION IS FOR PLANNING PURPOSES ONLY AND IS NOT TO BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO PROCURE ANY ITEMS/SERVICES, OR FOR THE GOVERNMENT TO PAY FOR THE INFORMATION RECEIVED. In the event the solicitation is developed it will be assigned a formal Request for Proposal (RFP) number and the solicitation will be publicized in the Federal Business Opportunities Web site.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N55236/N55236-18-R-CORONADO/listing.html)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN04719037-W 20171022/171020230909-c3185ac10b9dd7d87e6a4f9eeb6d22f9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |