FBODaily.com | FedBizOpps: PRESOL | 13 | Ammunition

FBO DAILY - FEDBIZOPPS ISSUE OF OCTOBER 28, 2017 FBO #5818
SOLICITATION NOTICE

13 -- Ammunition

Notice Date: 10/26/2017
Notice Type: Combined Synopsis/Solicitation
Contracting Office: Bldg 7100 Box 003, North Little Rock, AR 72199
ZIP Code: 72199
Solicitation Number: 0011074226_01
Response Due: 11/13/2017
Archive Date: 5/12/2018
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 0011074226_01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 332992 with a small business size standard of 1,000.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-11-13 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Camp Robinson, AR 72199 The National Guard - Arkansas requires the following items, Brand Name or Equal, to the following: LI 001: AM02, Ammo, Pistol.22 LR Eley Tenex FFP Needs to be delivered by 30 January 2018. SPECIFICATIONS/REQUIREMENTS 40,000 rds 1. AM02, AMMUNITION, PISTOL,.22 LR Eley Tenex or Lapua X-Act 2. Bullet: 40 gr. Round Nose Lead 3. Brass: Eley or Lapua 4. All ammunition provided will be from the same production run. 5. Muzzle Velocity: Muzzle velocity must average at least 1065-1075 feet per second (FPS) 6. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. Lot size shall be 5000 rounds per case. 7. Accuracy Standards: Five each ten-round shot-groups shall be fires at 50 yards. Average extreme spread (widest shot) of 10 round groups not to exceed 1.00 inches, no shot group shall exceed 1.00 inches at 50 yards. Measurements are to be computed from center to center to the widest shot in each of the ten round shot- groups 8. Testing Requirements: All candidate ammunition will be fired through a 5.5.22 caliber barrel with a one turn in 16 inches of twist. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: Candidate ammunition must burn clean and leave no residue. Ammunition must operate a semiautomatic Match pistol reliably:, 40000, LOT; LI 002: AM08, Ammo, Pistol, 9mm Luger 115GR JHP Needs to be delivered by 30 January 2018. SPECIFICATIONS/REQUIREMENTS 10,000 rds 1. AM08, AMMUNITION, PISTOL, CUSTOM LOADED 9mm Luger, 115GR. JHP 2. Bullet: Hornady 9mm 115gr XTP JHP 3. Brass: Starline Brass. 4. Primer: CCI Small Pistol. 5. Power: Any suitable powder that obtains the desired results 6. All ammunition provided will be from the same production run. 7. Muzzle Velocity: Muzzle velocity must average at least 1125 feet per second (FPS) (+ or - 25 FPS) measured at 70 degrees ambient temperature. 8. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. Lot size shall be 1000 rounds per case. 9. Accuracy Standards: Five each ten-round shot-groups shall be fires at 50 yards. Average extreme spread (widest shot) of 10 round groups not to exceed 1.50 inches, no shot group shall exceed 1.75 inches at 50 yards. Measurements are to be computed from center to center to the widest shot in each of the ten round shot-groups 10. Testing Requirements: All candidate ammunition will be fired through a 9mm barrel, five inches in length and one turn in 16 inches of twist. 100rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 11. Functional Characteristics: Candidate ammunition must burn clean and leave no residue. Ammunition must operate a semiautomatic Match pistol reliably:, 10000, LOT; LI 003: AM11, Ammo, Pistol, 9mmLuger 147GR JHP Needs to be delivered by 30 January 2018. SPECIFICATIONS/REQUIREMENTS 13,000 rds 1. AM11, AMMUNITION, PISTOL, CUSTOM LOADED 9mm Luger, 147GR. JHP 2. Bullet: Hornady 9mm 147gr XTP JHP 3. Brass: Starline Brass. 4. Primer: CCI Small Pistol. 5. Power: Any suitable powder that obtains the desired results 6. All ammunition provided will be from the same production run. 7. Muzzle Velocity: Muzzle velocity must average at least 900 feet per second (FPS) (+ or - 25 FPS) measured at 70 degrees ambient temperature. 8. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. Lot size shall be 1000 rounds per case. 9. Accuracy Standards: Five each ten-round shot-groups shall be fires at 50 yards. Average extreme spread (widest shot) of 10 round groups not to exceed 1.50 inches, no shot group shall exceed 1.75 inches at 50 yards. Measurements are to be computed from center to center to the widest shot in each of the ten round shot-groups 10. Testing Requirements: All candidate ammunition will be fired through a 9mm barrel, five inches in length and one turn in 16 inches of twist. 100rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 11. Functional Characteristics: Candidate ammunition must burn clean and leave no residue. Ammunition must operate a semiautomatic Match pistol reliably:, 13000, LOT; LI 004: AM12, Ammo, Pistol, 38 Special 157 SWC Needs to be delivered by 30 January 2018. SPECIFICATIONS/REQUIREMENTS 6,000 rds 1. AM12, AMMUNITION, PISTOL, CUSTOM LOADED.38 Special, 158 SWC 2. Bullet: 158 gr. Semi-Wadcutter or round nose Lead 3. Brass: Starline Brass. 4. Primer: Federal Gold Medal Small Pistol. 5. Power: Any suitable powder that obtains the desired results 6. All ammunition provided will be from the same production run. 7. Muzzle Velocity: Muzzle velocity must average at least 750 feet per second (FPS) (+ or - 25 FPS) measured at 70 degrees ambient temperature. 8. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. Lot size shall be 1000 rounds per case. 9. Accuracy Standards: Five each ten-round shot-groups shall be fires at 50 yards. Average extreme spread (widest shot) of 10 round groups not to exceed 1.50 inches, no shot group shall exceed 1.75 inches at 50 yards. Measurements are to be computed from center to center to the widest shot in each of the ten round shot-groups 10. Testing Requirements: All candidate ammunition will be fired through a 6ƒ??.38 caliber S&W revolver from a Ransom Rest. 100rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 11. Functional Characteristics: Candidate ammunition must burn clean and leave no residue:, 6000, LOT; LI 005: AM16, Ammo, Pistol 45 ACP 185GR JHP Needs to be delivered by 30 January 2018. SPECIFICATIONS/REQUIREMENTS 56,000 rds 1. AM16, AMMUNITION, PISTOL, CUSTOM LOADED 45 ACP, 185GR. JHP 2. Bullet: 45ACP 185gr JHP 3. Brass: Starline Brass. 4. Primer: CCI Large Pistol. 5. Powder: Any suitable powder that obtains the desired results 6. All ammunition provided will be from the same production run. 7. Muzzle Velocity: Muzzle velocity must average at least 815 feet per second (FPS) (+ or - 25 FPS) measured at 70 degrees ambient temperature. 8. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. Lot size shall be 1000 rounds per case. 9. Accuracy Standards: Five each ten-round shot-groups shall be fires at 50 yards. Average extreme spread (widest shot) of 10 round groups not to exceed 1.50 inches, no shot group shall exceed 1.75 inches at 50 yards. Measurements are to be computed from center to center to the widest shot in each of the ten round shot- groups 10. Testing Requirements: All candidate ammunition will be fired through a 45acp match barrel, five inches in length and one turn in 16 inches of twist. 100rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 11. Functional Characteristics: Candidate ammunition must burn clean and leave no residue: 12: There shall be no substitution of components for this SOW., 56000, LOT; LI 006: AM19, Ammo Rifle, 223Remi, 50/55GR Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 13,000 rds 1. AM19, AMMUNITION, RIFLE, CUSTOM LOADED 223 REMINGTON CALIBER Short Range 2. Bullet: 50 or 55gr. Sierra Blitz King or Hornady V-Max Bullet. The projectile shall be 0.224 inch diameter. 3. Primer & Brass: Winchester or Lake City mil spec brass with crimped in primers. No waterproofing on case mouth. Primers can be waterproofed but not necessary. 4. Powder: The manufacturer shall establish the charge weight to meet performance requirements, using any suitable powder that obtains the desired result. The average chamber pressure of the sample cartridges conditioned at 70 degrees plus or minus 5 degrees F, shall not exceed 59,000psi. Neither the chamber pressure of an individual sample test cartridge nor the average chamber pressure plus three std deviations of the chamber pressure shall exceed 64,700psi. Port pressure minus three std deviations shall be less than 15,300psi for the sample cartridges conditioned to 70 degrees plus or minus 5 degrees F. 5. Cartridge Length: Overall length not to exceed 2.260 inches when measured from tip of bullet to the base of the cartridge. 6. Muzzle Velocity: Muzzle velocity shall average at least 3000 feet per second (FPS) (plus or minus 25 FPS) measured at ambient temperature of 70 degrees F. When fired from a 20 �, 1-8 twist rate, 5.56 match grade barrels. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 2 inches or less at 200 yards when fired from a minimum of 5ea NGMTC AR-15 match grade uppers. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: Ammunition must cycle reliably from NGMTC 20, AR-15 match grade rifles with a 1-8 twist rate barrel. There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head: 10: There shall be no substitution of components for this SOW., 13000, LOT; LI 007: AM20, Ammo, Rifle, 223Rem, 77GR HPBT Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 91,500 rds 1. AM20, AMMUNITION, RIFLE, CUSTOM LOADED 223 REMINGTON CALIBER 2. Bullet: 77gr. Sierra Hollow Point Boat Tail Bullet. The projectile shall be 0.224 inch diameter. 3. Primer & Brass: Winchester or Lake City mil spec brass with crimped in primers. No waterproofing on case mouth. Primers can be waterproofed but not necessary. 4.Power: The manufacturer shall establish the charge weight to meet performance requirements, using St. Mark SMP756. The average chamber pressure of the sample cartridges conditioned at 70 degrees plus or minus 5 degrees F, shall not exceed 59,000psi. Neither the chamber pressure of an individual sample test cartridge nor the average chamber pressure plus three std deviations of the chamber pressure shall exceed 64,700psi. Port pressure minus three std deviations shall be less than 15,300psi for the sample cartridges conditioned to 70 degrees plus or minus 5 degrees F. 5. Cartridge Length: Overall length not to exceed 2.260 inches when measured from tip of bullet to the base of the cartridge. 6. Muzzle Velocity: Muzzle velocity shall average at least 2850 feet per second (FPS) (plus or minus 25 FPS) measured at ambient temperature of 70 degrees F. When fired from a 20 � 1-8 twist rate, 5.56 match grade barrels. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 2 inches or less at 200 yards when fired from a minimum of 5ea NGMTC AR-15 match grade uppers. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: Ammunition must cycle reliably from NGMTC 20 � AR-15 match grade rifles with a 1-8 twist rate barrel. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head: 10: There shall be no substitution of components for this SOW., 91500, LOT; LI 008: AM38, Ammo, Shotgun, 12ga. Reduced Recoil Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 2,000 rds 1. AM38, AMMUNITION, Shotgun, 12ga.Slug REM RL12RS 2. Bullet: 1oz rifled slug 3. Primer & Brass: Remington or equivalent. No waterproofing on case mouth or primer is required. The brass shall be Remington or equivalent, brass shall be within all SAAMI specifications 4. Powder: The power shall be Remington or equivalent 6. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of: a single type, grade, class, size, lot of propellant, lot of primers, bullets, cartridge case and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. Lot size shall be no larger than 10,000 cartridges and no smaller than 5,000 cartridges, 7. Accuracy Standards: N/A 8. Functional Characteristics: There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head., 2000, LOT; LI 009: NG02, Ammo, Rifle, 308 Service Rifle Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 13,000 rds 1. NG02, AMMUNITION, RIFLE, CUSTOM LOADED.308 Service Rifle 2. Bullet: 185 gr, Berger Juggernaut Hollow Point Boat Tail Bullet (30418). 3. Primer: CCI BR-4 primers. No waterproofing or crimp on primer. No waterproofing on case mouth 4. Brass: The brass shall be Lapua.308 Palma Small Rifle Primer case. 5. Powder: The powder shall be Hodgdon Varget. The charge shall be 43.0grs. 6. Cartridge Length: Overall length not to exceed 2.950 inches when measured from tip of bullet to the base of the cartridge. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 2 inches or less at 200 yards when fired from a minimum of 5ea NGMTC AR-10 match grade uppers. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: Ammunition must cycle reliably from NGMTC 20 � AR_10 match grade rifles with a 1-10 twist rate barrel. There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head: 11: There shall be no substitution of components for this SOW., 13000, LOT; LI 010: NG03, Ammo, Rifle, 308 Match 155.5GR Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 13,000 rds 1. NG03, AMMUNITION, RIFLE, CUSTOM LOADED 308 Match Rifle 2. Bullet: 155.5gr. Berger LRBTHP Bullet (30416). The projectile shall be 0.308 inch diameter. 3. Primer: CCI BR-4 primers. No waterproofing or crimp on primer. No waterproofing on case mouth. 4. Brass: The brass shall be Lapua.308 Palma Small Rifle Primer Case. 5. Powder: The power shall be Hodgdon, Varget. The charge weight shall be 46.7grs. 6. Cartridge Length: Overall length not to exceed 2.950 Inches when measured from tip of bullet to the base of the cartridge. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of a single type, grade, class, size and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 1.5 inches or less at 200 yards when fired from a minimum of 5ea NGMTC 308 match bolt guns. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC 9. Functional Characteristics: There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head: 10: There shall be no substitution of components for this SOW., 13000, LOT; LI 011: NG04, Ammo, Rifle 6.5 Creedmoor 140GR Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 3000 rds 1. NG04, AMMUNITION, RIFLE, CUSTOM LOADED 6.5 Creedmoor. 2. Bullet: 140gr Berger Hybrid Boat Tail Bullet (26414). 3. Primer: CCI BR-4 primers. No waterproofing and no crimp on primer. No waterproofing on case mouth. 4. Brass: Brass shall be Lapua Small primer manufacture. The brass shall be within all SAAMI specifications for all dimensions. 5. Powder: Any suitable powder that obtains the desired results. 6. Cartridge Length: The cartridge overall length (COL) shall be (2.800 + /-.008) inches when measured from tip of bullet to the base of the cartridge. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of: a single type, grade, class, size, lot of propellant, lot of primers, bullets, cartridge case and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 1.5 inches or less at 200 yards when fired from a 1-8 twist, 24 inch barrel. Velocity shall be not less than 2725fps. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head. 10. Brass case preparation: All cartridges shall have inside flash hole deburred prior to loading: 11: There shall be no substitution of components for this SOW., 3000, LOT; LI 012: NG04, Ammo, Rifle 6.5x55 140GR Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 1000 rds 1. NG04, AMMUNITION, RIFLE, CUSTOM LOADED 6.5 x 55 Swede. 2. Bullet: 140gr Berger Hybrid Boat Tail Bullet (26414). 3. Primer & Brass: CCI 200 primers. No waterproofing and no crimp on primer. No waterproofing on case mouth. 4. Brass: Brass shall be Lapua manufacture. The brass shall be within all SAAMI specifications for all dimensions. 5 Powder: Any suitable powder that obtains the desired results. 6. Cartridge Length: The cartridge overall length (COL) shall be (3.165 + /-.008) inches when measured from tip of bullet to the base of the cartridge. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of: a single type, grade, class, size, lot of propellant, lot of primers, bullets, cartridge case and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 1.5 inches or less at 200 yards when fired from a 1-8 twist, 24 inch barrel. Velocity shall be not less than 2750fps. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head. 10. Brass case preparation: All cartridges shall have inside flash hole deburred prior to loading: 11: There shall be no substitution of components for this SOW., 1000, LOT; LI 013: NG04, Ammo, Rifle 7x57, 168GR Needs to be delivered by 30 March 2018. SPECIFICATIONS/REQUIREMENTS 1000 rds 1. NG04, AMMUNITION, RIFLE, CUSTOM LOADED 7 x 57 Mauser. 2. Bullet: 168gr Berger VLD Boat Tail Bullet (28401). 3. Primer: CCI 200 primers. No waterproofing and no crimp on primer. No waterproofing on case mouth. 4. Brass: Brass shall be Norma or Nosler manufacture. The brass shall be within all SAAMI specifications for all dimensions. 5. Powder: Any suitable powder that obtains the desired results. 6. Cartridge Length: The cartridge overall length (COL) shall be (3.150 + /-.008) inches when measured from tip of bullet to the base of the cartridge. 7. Cartridge Lots: The cartridges shall be assembled in identifiable lots. Each lot shall consist of units of product of: a single type, grade, class, size, lot of propellant, lot of primers, bullets, cartridge case and composition, manufactured under the same conditions, by the same manufacturer, and at the same time. Only one type and weight of propellant shall be used in a lot of cartridges. Each cartridge lot shall contain no more than one lot of primers, one lot of propellant, and one lot of projectiles. 8. Accuracy Standards: Ammunition must average 1.5 inches or less at 200 yards when fired from a 1-9 twist, 24 inch barrel. Velocity shall be not less than 2775fps. 200rds of test ammunition must be provided prior to lot acceptance. Accuracy testing will be conducted by NGMTC. 9. Functional Characteristics: There shall be no weapon stoppages due to the cartridges. No failures to extract, no hang fires, no misfires either from primer failure or no vent hole in cartridge. No projectiles shall remain in the bore. There shall be no gas leakage or primer failures due to perforation of primer during firing pin indent, escape of gas through primer cup or around primer cup, no loose primers or blown primers. There shall be no cartridge case casualties due to longitudinal split at any point on case mouth, body, or head. There shall be no cartridge case casualties due to circumferential rupture at any point on the cartridge case mount, body, or head. 10. Brass case preparation: All cartridges shall have inside flash hole deburred prior to loading: 11: There shall be no substitution of components for this SOW., 1000, LOT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Arkansas intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Arkansas is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. SBA-Set-aside are preferred - but all offers will be considered.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/a1f529ad1c8347ea08385df67666ad5d)
Place of Performance: Address: Camp Robinson, AR 72199; Zip Code: 72199-9600
Record: SN04723657-W 20171028/171026230814-a1f529ad1c8347ea08385df67666ad5d (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

13 -- Ammunition