SOURCES SOUGHT
51 -- Hydraulic Powered Alternator
- Notice Date
- 11/1/2017
- Notice Type
- Sources Sought
- NAICS
- 333914
— Measuring, Dispensing, and Other Pumping Equipment Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department, Hwy. 547 Attn:B562-3C, Lakehurst, New Jersey, 08733-5083
- ZIP Code
- 08733-5083
- Solicitation Number
- N6833518R0057-RFI
- Archive Date
- 12/16/2017
- Point of Contact
- Rene Brown, Phone: 732-323-2780
- E-Mail Address
-
rene.brown@navy.mil
(rene.brown@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- Naval Air Systems Command (NAVAIR) and PMA 251 Aircraft Launch and Recovery Equipment (ALRE) Program Office are issuing this Request for Information to determine the feasibility and industry interest in the acquisition of a man-portable hydraulically powered alternator. The hydraulic powered alternator shall meet the requirements stated below. Submissions will be considered based on their ability to meet the functional and performance requirements described below, along with its total life-cycle impact. Interested companies may submit relevant product specifications or literature, and may proffer alternate technical solutions that meet Government requirements, as delineated below. Interested companies may also submit relevant product specifications or literature, and may proffer alternate technical solutions that are near or similar to the specified Government requirements. Rough Order of Magnitude pricing may be submitted for Government information and planning purposes. Eligibility The applicable PSC code is 5130 and the applicable NAICS code is 333911 with a size standard of 1000 employees. All interested businesses are encouraged to respond. Requirements The hydraulic-powered alternator shall be powered by a Stanley Hydraulic Tools Model HP 18289M Diesel Hydraulic Power Unit. 1.0 Alternator Requirements 1.1 Capacity: 3,500 Watts, 120/240 Volts, 60 Hertz 1.2 Two 110 volt, 15-amp duplex outlets 1.3 One 240 volt, 30-amp twist lock outlet 1.4 One 240 volt, 20-amp duplex outlet 1.5 Built-in Circuit breaker protection for all circuits 1.6 Built-in Voltmeter 1.7 Brushless design 1.8 Shock-mount feet-rubber 2.0 Alternator Hydraulic Power Requirements 2.1 Hydraulic flow rate and pressure requirements: 7 to 9 gpm at 2,100-2,200 psi. This is a Hydraulic Tool Manufacturers Association (H.T.M.A.) Type II Circuit. The Hydraulic System shall be an open-centered system. 2.2 Hydraulic connections: 3/8-in. NPT Male Adapter 2.3 Hydraulic Fluid shall be compatible with Exxon Mobil DTE 10 Excel with a viscosity index greater than 140. 3.0 Physical Dimensions - Maximum Size and Weight 3.1 Length: 22 inches (threshold); 20 inches (objective) 3.2 Width: 12 inches (threshold); 10 inches (objective) 3.3 Height: 12 inches (threshold); 10 inches (objective) 3.4 Weight: 75 Pounds Maximum Submittal Information and Instructions The Government requests interested companies submit documentation to address the following information: 1. Company Name and Address; applicable CAGE code, company point of contact and position along with contact information. 2. Company profile to include number of employees, annual revenue history, office location(s), DUNS number, and a definitive statement of current small/large business status under the assigned NAICS Code. 3. Manpower to include the number of company employees and applicable skill sets. Interested companies are invited to submit a Capabilities Package of no more than 3 pages in length, single spaced, 12 point font minimum. The Capabilities Package will be used to determine a company's ability to meet the requirements and the information requested in the Capability Package Submittal Information and Instructions 1-3. The Government may subsequently opt to conduct company site visits to further determine eligibility and capability. Please note that this Request for Information is not a request for proposal. It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and Government is not obligated to award a contract as a result of this announcement. The Government will NOT reimburse companies for any expenses incurred to prepare the Capability Package Submittal Information.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N6833518R0057-RFI/listing.html)
- Record
- SN04728491-W 20171103/171101230814-db2ba9f6e831a20fd01bba8d77c17051 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |