SOURCES SOUGHT
12 -- 1 NSN SOURCES SOUGHT NOTICE
- Notice Date
- 11/3/2017
- Notice Type
- Sources Sought
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPE7LX18R0002
- Archive Date
- 11/25/2017
- Point of Contact
- Scott D. Knowles, Phone: 6146920639
- E-Mail Address
-
scott.knowles@dla.mil
(scott.knowles@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME. The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. Please provide the company name, c ity and state OR country if applicable, and POCs with telephone, fax and/or email information. All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. Phone 614 692-0639. We thank you in advance for your assistance. NSN 1240-01-319-8995 Item Description: PERISCOPE, ARMORED VEHICLE RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RT001: MEASURING AND TEST EQUIPMENT CS001: THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITI CAL tECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25. DRAWING 12357793 REV.F, CHANGE NOTE 5: WAS: "SPECIFIED FOR PNS 12357793-1E-3: PAINT BODY PER MIL-C-46168: COLOR BLACK." IS: "SPECIFIED FOR PNS 12357793-1E-3: ENGINEERING EXCEPTION TEXT (CONTINUED): PAINT BODY PER MIL-DTL-53039B OR MIL-DTL-64159: COLOR BLACK." DRAWING 12357793 REV.F, CHANGE NOTE 6: WAS: "SPECIFIED FOR PNS 12357793-18-3 STAMP ONTO BLOCK "LASER SAFETY CODE B" IN 1/8 INCH LETTERS WITH RED INDELIBLE INK PER MIL-I-43553. IS: "SPECIFIED FOR PNS 12357793-18-3 STAMP ONTO BLOCK "LASER SAFETY CODE B" IN 1/8 INCH LETTERS WITH RED INDELBLE INK PER A-A-56032." ZD003: A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil CS240: NOTE: THIS IS A RESTRICTED SOURCE ITEM MANUFACTURED TO THE OEM DRAWING(S) CITED HEREIN AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN PREQUALIFIED TO MANUFACTURE THE ITEM. OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR THE INTENDED APPLICATION AS PER DLAI 3200.1, ENCL 6. SAID EVALUATION MAY TAKE AN EXTENDED PERIOD OF TIME AND MAY THEREFORE BE APPLICABLE TO FUTURE PROCUREMENTS. FINAL APPROVAL AUTHORITY REST WITH THE GOVERNMENT DESIGN CONTROL ACTIVITY. CQ006: "CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT." CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 12357792 REVISION NR P DTD 08/26/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12357797 REVISION NR E DTD 11/27/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7680606 REVISION NR W DTD 06/22/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10940477 REVISION NR E DTD 11/21/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7633134 REVISION NR U DTD 01/09/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7632973 REVISION NR F DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7633067 REVISION NR J DTD 07/12/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7633133 REVISION NR J DTD 05/19/1998 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12357797 REVISION NR C DTD 01/11/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12357796 REVISION NR F DTD 08/19/1997 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12357796 REVISION NR A DTD 06/07/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12357792 REVISION NR DTD 08/19/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12357792 REVISION NR C DTD 02/19/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12357793 REVISION NR F DTD 05/19/1998 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12357792 REVISION NR C DTD 01/11/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7641866 REVISION NR R DTD 12/12/1997 PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X UNIT CONT:XX OPI:A INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 ZZ shall be IAW SPI P12357792. M-41, unit container shall be IAW ASTM-D-5118. Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPE7LX18R0002/listing.html)
- Place of Performance
- Address: 3990 EAST BROAD STREET, COLUMBUS, Ohio, United States
- Record
- SN04731128-W 20171105/171103230708-423927756eab17828a81ce87367685f4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |