Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 09, 2017 FBO #5830
DOCUMENT

J -- Automatic Transfer Switch Testing and Imaging - Attachment

Notice Date

11/7/2017
 

Notice Type

Attachment
 

NAICS

238210 — Electrical Contractors and Other Wiring Installation Contractors
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 1;1 VA Center;Augusta ME 04330
 

ZIP Code

04330
 

Solicitation Number

36C24118Q0033
 

Response Due

11/27/2017
 

Archive Date

12/27/2017
 

Point of Contact

Tammy Davis
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) The solicitation number is 36C24118Q0033 and the solicitation is issued as a request for quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. (iv) This requirement is being issued as a Service Disabled Veteran Owned Small Business set-aside. The associated NAICS code is 238210 Electrical Contractors and Other Wiring Installation Contractors, and small business size standard is $15 million. (v) The Government intends to award a firm-fixed price contract for a Contractor to provide Annual Automatic Transfer Switch Testing and Imaging located at the Boston Healthcare System, West Roxbury Division 1400 VFW Parkway, West Roxbury, MA 02132. Item # Description- Base Year 12/01/2017-11/30/2018 Qty Unit Price Amount 0001 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging in accordance with the attached Performance Work Statement. (Includes all travel costs) 23 EA 0002 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging After Hours in accordance with the attached Performance Work Statement. (Includes all travel costs) 9 EA 0003 The contractor shall provide all labor to perform preventative maintenance/ repairs on ATS in accordance with the Performance Work Statement. 30 HR 0004 The contractor shall provide parts as needed for ATS Corrective Maintenance/Repairs. A supplier quote shall be furnished with the invoice for COR review and approval. The contractor shall provide maximum ________% markup for parts. The line item amount at award will be $5,000.00 NTE 1 YR $5,000.00 TOTAL Item # Description- Option Year 1 12/01/2018-11/30/2019 Qty Unit Price Amount 1001 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging in accordance with the attached Performance Work Statement. (Includes all travel costs) 23 EA 1002 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging After Hours in accordance with the attached Performance Work Statement. (Includes all travel costs) 9 EA 1003 The contractor shall provide all labor to perform preventative maintenance/ repairs on ATS in accordance with the Performance Work Statement. 30 HR 1004 The contractor shall provide parts as needed for ATS Corrective Maintenance/Repairs. A supplier quote shall be furnished with the invoice for COR review and approval. The contractor shall provide maximum ________% markup for parts. 1 YR $5,000.00 TOTAL Item # Description- Option Year 2 12/01/2019-11/30/2020 Qty Unit Price Amount 2001 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging in accordance with the attached Performance Work Statement. (Includes all travel costs) 23 EA 2002 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging After Hours in accordance with the attached Performance Work Statement. (Includes all travel costs) 9 EA 2003 The contractor shall provide all labor to perform preventative maintenance/ repairs on ATS in accordance with the Performance Work Statement. 30 HR 2004 The contractor shall provide parts as needed for ATS Corrective Maintenance/Repairs. A supplier quote shall be furnished with the invoice for COR review and approval. (The contractor shall provide maximum ________% markup for parts. 1 YR $5,000.00 TOTAL Item # Description- Option Year 3 12/01/2020-11/30/2021 Qty Unit Price Amount 3001 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging in accordance with the attached Performance Work Statement. (Includes all travel costs) 23 EA 3002 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging After Hours in accordance with the attached Performance Work Statement. (Includes all travel costs) 9 EA 3003 The contractor shall provide all labor to perform preventative maintenance/ repairs on ATS in accordance with the Performance Work Statement. 30 HR 3004 The contractor shall provide parts as needed for ATS Corrective Maintenance/Repairs. A supplier quote shall be furnished with the invoice for COR review and approval. The contractor shall provide maximum ________% markup for parts. 1 YR $5,000.00 TOTAL Item # Description- Option Year 4 12/01/2021-11/30/2022 Qty Unit Price Amount 4001 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging in accordance with the attached Performance Work Statement. (Includes all travel costs) 23 EA 4002 The contractor shall provide all labor, equipment, materials and supervision to complete annual Automatic Transfer Switch Testing and Imaging After Hours in accordance with the attached Performance Work Statement. (Includes all travel costs) 9 EA 4003 The contractor shall provide all labor to perform preventative maintenance/ repairs on ATS in accordance with the Performance Work Statement. 30 HR 4004 The contractor shall provide parts as needed for ATS Corrective Maintenance/Repairs. A supplier quote shall be furnished with the invoice for COR review and approval. The contractor shall provide maximum ________% markup for parts. 1 YR $5,000.00 TOTAL TOTAL (vi) The contractor shall provide all personnel, equipment, supplies, tools, and materials necessary to complete all Automatic Transfer Switch Testing and Imaging in accordance with the attached Performance Work Statement. (vii) The Place of Performance is the Boston Healthcare System, West Roxbury Division 1400 VFW Parkway, West Roxbury, MA 02132. The period of performance is 12/01/2017-11/30/2018 with four option years. (viii) Provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition in addition to the following addenda s to the provision: 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998); 52.217-5 Evaluation of Options (JUL 1990); (ix) 52.212-2 EVALUATION COMMERCIAL ITEMS (Oct 2014) Submission of Quotes: (1) Quotes shall be received on or before the date and time specified in Section (xv) of this solicitation. We will not consider any quote that we receive after the deadline unless we receive it before we issue a purchase order and considering it is in the best interest of the Government and will not delay our purchase. (2) Quotes may be submitted electronically via email to Tammy.Davis6@va.gov. (3) Quote Format: The submission should be clearly indexed in accordance with the evaluation criteria below. All pages of the quote shall be appropriately numbered and identified by the complete company name, date and solicitation number. The Contractor shall include its company name, address, DUNS and Cage Code. Please do not submit company brochures. (4) Questions shall be submitted to the Contract Specialist in writing via e-mail. Oral questions are not acceptable due to the possibility of misunderstanding or misinterpretation. The cut-off date and time for receipt of questions is 11/13/2017 at 12:00 PM EST. Questions received after this date and time may not be answered. Questions will be answered in a formal amendment to the solicitation so all interested parties can see the answers. (5) Evaluation Process: Award will be made to the best value, as determined to be the most beneficial to the Government. Please read each section below carefully for the submittals and information required as part of the evaluation. Failure to provide the requested information below shall be considered non-compliant and your quote could be removed from the evaluation process. Quotes shall be evaluated under FAR Part 13.106-2(b) -- Evaluation of Quotations or Offers. After the evaluation of quotes, the Contracting Officer may negotiate final terms with one or more quoters of the Government s choice before issuing a purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government s choice and will not use the formal source selection procedures described in FAR Part 15. The Contracting Officer may issue a purchase order to other than the quoter with the lowest price. The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes:   Price - Vendor will complete the Price Schedule (attached) with proposed contract line item prices inserted in appropriate spaces.   a. In order to evaluate the mark up on parts (CLINs 0004, 1004, 2004, 3004 and 4004), the Government will evaluate quotes by multiplying the mark up % submitted by the vendor in the price schedule by $5,000.00 to get a total line item amount. For example, if the vendor submits a markup of 20%, the total evaluated price for CLINS 0004, 1004, 2004, 3004 and 4004 will be $6,000.00 each ($5,000.00 *1.20). The Government will evaluate quotes for award purposes by adding the total revised price for CLINs 0004, 1004, 2004, 3004 and 4004 to the total quote amount. This is for evaluating quotes ONLY. Past Performance: Provide (3) references of work, similar in scope and size with the requirement detailed in the Performance Work Statement. References must include contact information; brief description of the work completed, and contract # (if relevant).   Please utilize Attachment Past Performance Worksheet for your references and please submit as part of your quote submission. References may be checked by the Contracting Officer to ensure your company is capable of performing the Performance Work Statement.   The Government also reserves the right to obtain information for use in the evaluation of past performance from any and all sources to include PPIRS. Technical: The vendor s quote shall be evaluated to determine if the organization has the experience and capabilities to provide the requested services in accordance with the Performance Work Statement.   The contractor shall provide the following: a. The vendor shall demonstrate that it is OHSA Trained Employees in electrical safety Employees Trained to NFPA 70E NETA certified Company b. The vendor shall demonstrate that it is factory trained on the Russelectric equipment to be tested and have a minimum of 20 years of experience, as many of the VA sites have older gear operating on site in excess of 15 years. c. The vendor shall provide a Certification of Thermographer Level 2 or greater for the engineer/Technician. d. Provide example of inspection and imaging report meeting stated objectives in the Performance Work Statement. Options: The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s). The Government will evaluate prices for the option under FAR 52.217-8  by using the last year s option prices to calculate the price for six months of effort, and adding that amount to the base and other option years to arrive at the total. A written notice of award, mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quote s specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (x) 52.212-3 Offeror Representations and Certifications-Commercial Items (JAN 2017). Ensure your representations and certifications are complete in the System for Award Management (SAM)( https://www.sam.gov). Otherwise, you will need to fill out solicitation Clause 52.212-3 "Offeror Representation and Certifications -Commercial Items", and submit with the quote. Federal Acquisition Regulations require that federal contractors register in the SAM database at http://www.sam.gov and enter all mandatory information into the system. Award cannot be made until the contractor has registered. Offerors are encouraged to ensure that they are registered in SAM prior to submitting their quotation. (xi) Clause 52.212-4, Contract Terms and Conditions -- Commercial Items (JAN 2017), applies to this acquisition in addition to the following addenda s to the clause: 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013), 852.203-70 Commercial Advertising (JAN 2008), 852.237-70 Contractor Responsibilities (APR 1984) 52.217-8 -- Option to Extend Services (Nov 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 10 days of contract expiration. (End of Clause) 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within 30 days of expiration; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed four (4) years and six (6) months. 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, Service-disabled veteran-owned small business concern : (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans (or eligible surviving spouses); (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from service-disabled veteran-owned small business concerns. Offers received from concerns that are not service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a service-disabled veteran-owned small business concern. (c) Agreement. A service-disabled veteranowned small business concern agrees that in the performance of the contract, in the case of a contract for: (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible service-disabled veteran-owned small business concerns; (2) Supplies (other than acquisition from a nonmanufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible service-disabled veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern s employees or the employees of other eligible service-disabled veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern s employees or the employees of other eligible service-disabled veteran-owned small business concerns. (d) A joint venture may be considered a service-disabled veteran owned small business concern if (1) At least one member of the joint venture is a service-disabled veteran-owned small business concern, and makes the following representations: That it is a service-disabled veteran-owned small business concern, and that it is a small business concern under the North American Industry Classification Systems (NAICS) code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; and (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation. (4) The joint venture meets the requirements of 13 CFR 125.15(b). (e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program. (End of Clause) LIMITATIONS ON SUBCONTRACTING-- MONITORING AND COMPLIANCE (JUN 2011) This solicitation includes VAAR 852.219-10. Accordingly, any contract resulting from this solicitation will include this clause. The contractor is advised in performing contract administration functions, the CO may use the services of a support contractor(s) retained by VA to assist in assessing the contractor's compliance with the limitations on subcontracting or percentage of work performance requirements specified in the clause. To that end, the support contractor(s) may require access to contractor's offices where the contractor's business records or other proprietary data are retained and to review such business records regarding the contractor's compliance with this requirement. All support contractors conducting this review on behalf of VA will be required to sign an Information Protection and Non-Disclosure and Disclosure of Conflicts of Interest Agreement to ensure the contractor's business records or other proprietary data reviewed or obtained in the course of assisting the CO in assessing the contractor for compliance are protected to ensure information or data is not improperly disclosed or other impropriety occurs. Furthermore, if VA determines any services the support contractor(s) will perform in assessing compliance are advisory and assistance services as defined in FAR 2.101, Definitions, the support contractor(s) must also enter into an agreement with the contractor to protect proprietary information as required by FAR 9.505-4, obtaining access to proprietary information, paragraph (b). The contractor is required to cooperate fully and make available any records as may be required to enable the CO to assess the contractor's compliance with the limitations on subcontracting or percentage of work performance requirement. 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2012) (a) Definitions. As used in this clause- (1) Contract financing payment has the meaning given in FAR 32.001. (2) Designated agency office has the meaning given in 5 CFR 1315.2(m). (3) Electronic form means an automated system transmitting information electronically according to the accepted electronic data transmission methods and formats identified in paragraph (c) of this clause. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. (4) Invoice payment has the meaning given in FAR 32.001. (5) Payment request means any request for contract financing payment or invoice payment submitted by the contractor under this contract. (b) Electronic payment requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a Government-wide commercial purchase card are considered to be an electronic transaction for purposes of this rule, and therefore no additional electronic invoice submission is required. (c) Data transmission. A contractor must ensure that the data transmission method and format are through one of the following: (1) VA s Electronic Invoice Presentment and Payment System. (See Web site at http://www.fsc.va.gov/einvoice.asp.) (2) Any system that conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards Center (ASC) and chartered by the American National Standards Institute (ANSI). The X12 EDI Web site (http://www.x12.org) includes additional information on EDI 810 and 811 formats. (d) Invoice requirements. Invoices shall comply with FAR 32.905. (e) Exceptions. If, based on one of the circumstances below, the contracting officer directs that payment requests be made by mail, the contractor shall submit payment requests by mail through the United States Postal Service to the designated agency office. Submission of payment requests by mail may be required for: (1) Awards made to foreign vendors for work performed outside the United States; (2) Classified contracts or purchases when electronic submission and processing of payment requests could compromise the safeguarding of classified or privacy information; (3) Contracts awarded by contracting officers in the conduct of emergency operations, such as responses to national emergencies; (4) Solicitations or contracts in which the designated agency office is a VA entity other than the VA Financial Services Center in Austin, Texas; or (5) Solicitations or contracts in which the VA designated agency office does not have electronic invoicing capability as described above. (End of clause) 852.237-70 CONTRACTOR RESPONSIBILITIES (APR 1984) The contractor shall obtain all necessary licenses and/or permits required to perform this work. He/she shall take all reasonable precautions necessary to protect persons and property from injury or damage during the performance of this contract. He/ she shall be responsible for any injury to himself/herself, his/her employees, as well as for any damage to personal or public property that occurs during the performance of this contract that is caused by his/her employees fault or negligence, and shall maintain personal liability and property damage insurance having coverage for a limit as required by the laws of the State of [ ]. Further, it is agreed that any negligence of the Government, its officers, agents, servants and employees, shall not be the responsibility of the contractor hereunder with the regard to any claims, loss, damage, injury, and liability resulting there from. (End of Clause) (xii) Clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition and in addition to the following FAR clauses cited, which are also applicable to the acquisition: 52.204-10; 52.209-6; 52.219-28, 52.222-3, 52.222-21, 52.222-26, 52.222-35; 52.222-36, 52.222-37; 52.222-40; 52.222-50, 52.223-18, 52.225-13, 52.232-33, 552.222-17; 2.222-41, 52.222-42, 52.222-43; 52.222-55; 52.222-62 ; (xiii) All contract requirement(s) and/or terms and conditions are stated above. (xiv) The Defense Priorities and Allocations System (DPAS) and assigned rating are not applicable to this requirement. (xv) RFQ responses are due 11/27/2017 at 12:00 PM EST. RFQ responses must be submitted via email to: Tammy.Davis6@va.gov. Hand deliveries will not be accepted. (xvi) The POC of this solicitation is Tammy Davis (Tammy.Davis6@va.gov). PERFORMANCE WORK STATEMENT Automatic Transfer Switch Testing and Imaging 1.0 SCOPE OF WORK The contractor shall perform annual Automatic Transfer Switch Testing and Imaging, corrective maintenance and/or emergency repairs at the Boston Healthcare System, West Roxbury Division, 1400 VFW Parkway, West Roxbury, MA 02132. The Contractor shall provide all labor, materials, tools and special equipment required to perform the work. The Period of Performance is 12/01/2017 through 11/30/2018 with four Option Years. All testing and imaging for the base year shall be completed within 30 days of the contract start date. 2.0 PERFORMANCE REQUIREMENTS 2.1 INFRARED THERMAL IMAGING: Thermal infrared imaging of both the normal and emergency power poles shall be done during annual testing. The transfer/bypass switch shall be in the emergency position for 30 minutes, prior to the imaging pictures taken to allow for any temperature rise. Reports of anomalies shall include a color photograph of the switch being tested & a color thermal imaging print. Both the transfers switch & bypass contacts shall be scanned. 2.2 Qualifications: The Contractor shall be NETA certified and either factory trained and authorized or factory trained on the Russelectric equipment to be tested and have a minimum of 20 years of experience, as many of the VA sites have older gear operating on site in excess of 15 years. 2.2.1 The Field Engineer/Technician shall also be a Certified Level 2 or greater Thermographer. 2.3 TESTING REQUIREMENTS 2.3.1 IN-PHASE MONITORS (SYNC CHECK RELAYS) In-phase monitors shall be checked for calibration and shall be set for + or 7 degrees maximum. Relay output contacts shall be tested, Dead bus relay outputs shall be confirmed and maximum slip rate shall be noted on the test reports. 2.3.2 VOLTAGE & FREQUENCY SENSORS All voltage and frequency sensors for both normal and emergency shall be calibrated with a three-phase test set, using calibrated meters for all pickup & dropout values. All results, including as found and as left settings shall be noted on the test reports. 2.3.3 AUXILIARY CONTACTS & SPECIAL TIMED CONTACTS All auxiliary position contacts shall be tested in both positions and so noted in the test reports. All auxiliary contact functions such as Normal Power Available, Emergency Power Available, ETC. Shall be verified and noted in the test reports. 2.3.4 TIMER CALIBRATION AND OPERATION CHECKS The following timers shall be checked for accuracy and so noted in the test reports: Time delay, engine start. Time Delay, transfer to Emergency. UMD Timer for Pre, Post, or Both.. T3/W3 elevator pre-signal time delay w/ bypass. Time delay, retransfer to normal. (set at 30 minutes) Time delay, engine cool down. (set at 300 seconds) Time delay neutral position on Delayed transition switches. 2.3.5 LOAD SHED, BLOCK TRANSFER & RE-ADD CRKTS. Special custom Load shed, Block Transfer & Re-add circuits shall be verified to be operational and be noted on the test reports. (If applicable) 2.3.6 VERIFY TOTAL POWER FAILURE TO RESTORATION OF LOAD FROM EMERGENCY GENERATOR Time delay, engine start = 1 or 3 seconds (Engineering Dept to specify actual time) Time delay, transfer to emergency =.1-15 seconds (Engineering Dept to specify actual time) Time delay, pre-signal = 10-20 seconds (Elevator contractor to specify actual required time) Time delay, load shed = 1-30 seconds (Engineering Dept to specify actual required time delay) Engine up to speed time = typical 4.5-6 seconds Retransfer to normal position = 5 minutes Insure total transfer time on Critical or Life Safety switches do not exceed 10 seconds. Insure that Elevator transfer switches transfer within 10 seconds, or as allowed by Mass Elevator Regulations (524 CMR) which is typically 25 seconds. 2.3.7 BYPASS/ISOLATION SWITCH TESTS Provide bypass to normal and bypass to emergency operations with Isolation option for each. Insure no load-break condition exists. (switch must be a make-before-break arrangement) If switches are of the Load-break design, Engineering will establish the time & date for these tests. Verify Manual Transfer switch function of Bypass switch.(Manual Transfer Switch Operation) Insure engine start contacts stay closed with ATS module out in Isolate position After switch is isolated, rack ATS module back into the TEST position and cycle the switch through a complete sequence. Follow manufacturer s instructions for returning switch to normal operating position Verify B/I module relays are properly energized and that all blocking interlocks are operating correctly. Verify all auxiliary and B/I engine start contacts. 2.3.8 PREMIUM TIME WORK: Some work shall be completed on premium time see attached ATS List for the ATS Inventory that shall be completed on off hours. 2.3.9 PLEASE NOTE: TESTING OF BYPASS/ISOLATION SWITCHES REQUIRES ADDITIONAL TESTING CRITERIA DIFFERENT AND IN ADDITION TO A STANDARD ATS. The Government may require the addition or deletion of units. This will be completed through a contract modification. All services and inspections shall be scheduled through the COR. No additional work can be performed under this contract and no changes to this Scope of Work can be made without the authority and prior approval of the Contracting Officer. 2.4 TEST REPORT REQUIREMENTS: Test Reports shall be complete and detailed. 2.5 CORRECTIVE MAINTENANCE/EMERGENCY REPAIRS 2.5.1 The contractor shall provide all labor, material and equipment to perform corrective maintenance/emergency repairs to the Automatic Transfer Switches. The contractor shall respond to requests for repairs within 12 hours. 2.5.2 Please note, the amount of corrective maintenance/emergency repairs is unknown at this time. These services are not guaranteed and will fluctuate based on the need and severity of the situation. The COR shall approve all work prior to the contractor performing any maintenance/repairs. If additional hours or parts are needed beyond what is included in the contract line items, an increase will be provided by the contracting officer through a modification to the contract. No work shall be completed in excess of the quantities/dollar value of the contract. 3. STANDARDS/REGUALTIONS The following standards, as applicable, shall be part of the testing requirements: NFPA-70 (NATIONAL ELECTRIC CODE) NFPA-70B (ELECTRICAL EQUIPMENT MAINTENANCE) NFPA-70E (ELECTRICAL SAFETY IN THE WORKPLACE) NFPA-99 (HEALTH CARE FACILITIES) NFPA-101 (LIFE SAFETY CODE) NFPA-110 (EMERGENCY AND STANDBY POWER SYSTEMS) NFPA-20 (STATIONARY PUMPS FOR FIRE PROTECTION) ANSI/NETA-MTS (MAINTENANCE TESTING SPECIFICATIONS) MA ELEVATOR REGULATIONS (524 CMR) 4.0 EQUIPMENT TO BE SERVICED: See Attached Equipment List 5. PERFORMANCE REQUIREMENT SUMMARY: The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success. Performance Objective Standard Performance Threshold Method of Surveillance PRS # 1. The contractor shall provide ATS Testing and Imagine Services. Services are performed in accordance with NFPA-70, NFPA-70B, NFPA-70E, NFPA-99, NFPA-101, NFPA-110, NFPA-20, ANSI/NETA-MTS, and MA Elevator Regulations. 100% Periodic Surveillance
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/ToVAMROC402/ToVAMROC402/36C24118Q0033/listing.html)
 

Document(s)

Attachment
 

File Name: 36C24118Q0033 36C24118Q0033_1.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895757&FileName=36C24118Q0033-001.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895757&FileName=36C24118Q0033-001.docx

 

File Name: 36C24118Q0033 Attachment Equipment ATS List.xlsx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895758&FileName=36C24118Q0033-002.xlsx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895758&FileName=36C24118Q0033-002.xlsx

 

File Name: 36C24118Q0033 Attachment 2 Past Performance.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895759&FileName=36C24118Q0033-003.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895759&FileName=36C24118Q0033-003.docx

 

File Name: 36C24118Q0033 Wage Determination.pdf (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895760&FileName=36C24118Q0033-004.pdf)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3895760&FileName=36C24118Q0033-004.pdf

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Department of Veterans Affairs;Boston VAMC West Roxbury;1400 VFW Parkway;West Roxbury, MA

Zip Code: 02132
 

Record

SN04733836-W 20171109/171107231253-a08fa44de8b4f28474b8d8ce5705fb7c (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |