SOLICITATION NOTICE
95 -- ROUND BAR
- Notice Date
- 11/7/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 331221
— Rolled Steel Shape Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPMYM118Q0006
- Archive Date
- 11/29/2017
- Point of Contact
- Edgar Montesramirez, Phone: 7573969356
- E-Mail Address
-
edgar.montesramirez@dla.mil
(edgar.montesramirez@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Defense Logistics Agency, DLA Maritime Norfolk, Norfolk Naval Shipyard Contracting Division, intends to negotiate a Firm Fixed Price, 100% small business set-aside contract to procure 4" OD X 60" LONG ROUND BAR, 5.5" X 5.5" X 60" LONG SQUARE BAR, and 3.5" X 3.5" X 72" LONG SQUARE BAR (see solicitation for details) to be delivered to the Norfolk Naval Shipyard, Portsmouth, VA. The North American Industry Classification System (NAICS) code is 331221 (Rolled steel shape, iron, steel plate, bars and rods, sheet and strip) The contract line items are as follows: CLIN 0001: ROUND BAR 4" OD X 60" LONG ORDERING DATA: MIL-S-24093 Class C Type 1. 6.2 Acquisition requirements. Acquisition documents must specify the following: a. Title, number and date of this specification. STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED, MIL-S-24093A, 10 JULY 2012. b. The class and type of steel required (sec. 1.2) CLASS C / TYPE 1. c. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.1 and 2.2) N/A d. Whether special melting practicesare required. (SEE 3.1) e. Whether continuous casting is prohibited. N/A f. Whether virgin raw materials arc required. (SEE 3.1.2) g. When transverse mechanical properties are desired. (SEE 3.4) SEE TABLE 1 AND TABLE 2. h. When impact testing is required (see 3.4.2 and 4.3.3) SEE TABLE 3. i. Dimensions and tolerances required (see 3.7) FORGINGS SHALL CONFORM TO DIMENSIONS AND TOLERANCES SPECIFED. j. When Identification marking is not required (see 3.8) N/A k. When marking other than indentation stamping is required (see 3.8) N/A l. When ultrasonic examination is required. (SEE 3.10.2) UT TESTING CERTIFICATE TO BE SUPPLIED WITH MATERIAL RECEIPT, AS WELL AS CERT OF COMPLIANCE, CHEMICAL AND MECHANICAL DATA REPORTS AND NDT REPORT. m. Ultrasonic examination acceptance criteria if other than as specified (see 3.10.2) TO BE SUPPLIED WITH RECEIPT OF MATERIAL, AS WELL AS CERT OF COMPLIANCE, CHEMICAL AND MECHANICAL DATA REPORTS AND NDT REPORT. n. Preservation, packing, and marking requirements (see 5.4) COMMERCIAL. CLIN 0002: SQUARE BAR 5.5" X 5.5" X 60" LONG ORDERING DATA: MIL-S-24093 Class C Type 1. 6.2 Acquisition requirements. Acquisition documents must specify the following: a. Title, number and date of this specification. STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED, MIL-S-24093A, 10 JULY 2012. b. The class and type of steel required (sec. 1.2) CLASS C / TYPE 1. c. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.1 and 2.2) N/A d. Whether special melting practicesare required. (SEE 3.1) e. Whether continuous casting is prohibited. N/A f. Whether virgin raw materials arc required. (SEE 3.1.2) g. When transverse mechanical properties are desired. (SEE 3.4) SEE TABLE 1 AND TABLE 2. h. When impact testing is required (see 3.4.2 and 4.3.3) SEE TABLE 3. i. Dimensions and tolerances required (see 3.7) FORGINGS SHALL CONFORM TO DIMENSIONS AND TOLERANCES SPECIFED. j. When Identification marking is not required (see 3.8) N/A k. When marking other than indentation stamping is required (see 3.8) N/A l. When ultrasonic examination is required. (SEE 3.10.2) UT TESTING CERTIFICATE TO BE SUPPLIED WITH MATERIAL RECEIPT, AS WELL AS CERT OF COMPLIANCE, CHEMICAL AND MECHANICAL DATA REPORTS AND NDT REPORT. m. Ultrasonic examination acceptance criteria if other than as specified (see 3.10.2) TO BE SUPPLIED WITH RECEIPT OF MATERIAL, AS WELL AS CERT OF COMPLIANCE, CHEMICAL AND MECHANICAL DATA REPORTS AND NDT REPORT. n. Preservation, packing, and marking requirements (see 5.4) COMMERCIAL. CLIN 0003: SQUARE BAR 3.5" X 3.5" X 72" LONG ORDERING DATA: MIL-S-24093 Class C Type 1. 6.2 Acquisition requirements. Acquisition documents must specify the following: a. Title, number and date of this specification. STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED, MIL-S-24093A, 10 JULY 2012. b. The class and type of steel required (sec. 1.2) CLASS C / TYPE 1. c. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.1 and 2.2) N/A d. Whether special melting practicesare required. (SEE 3.1) e. Whether continuous casting is prohibited. N/A f. Whether virgin raw materials arc required. (SEE 3.1.2) g. When transverse mechanical properties are desired. (SEE 3.4) SEE TABLE 1 AND TABLE 2. h. When impact testing is required (see 3.4.2 and 4.3.3) SEE TABLE 3. i. Dimensions and tolerances required (see 3.7) FORGINGS SHALL CONFORM TO DIMENSIONS AND TOLERANCES SPECIFED. j. When Identification marking is not required (see 3.8) N/A k. When marking other than indentation stamping is required (see 3.8) N/A l. When ultrasonic examination is required. (SEE 3.10.2) UT TESTING CERTIFICATE TO BE SUPPLIED WITH MATERIAL RECEIPT, AS WELL AS CERT OF COMPLIANCE, CHEMICAL AND MECHANICAL DATA REPORTS AND NDT REPORT. m. Ultrasonic examination acceptance criteria if other than as specified (see 3.10.2) TO BE SUPPLIED WITH RECEIPT OF MATERIAL, AS WELL AS CERT OF COMPLIANCE, CHEMICAL AND MECHANICAL DATA REPORTS AND NDT REPORT. n. Preservation, packing, and marking requirements (see 5.4) COMMERCIAL. This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13, Simplified Acquisition Procedures. the solicitation number is SPMYM1-18-Q-0006 and it is expected to be posted on or around 07 November 2017. Quotes will be due by 12:00 pm EST on or around 14 November 2017 and may be emailed to the attention of Edgar Montesramirez at edgar.montesramirez@dla.mil. Please make sure that the solicitation number (SPMYM1-18-Q-0006) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Vendors must answer all evaluation factors for their bids to be considered viable. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://www.fbo.gov (Federal Business Opportunities). By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPMYM118Q0006/listing.html)
- Place of Performance
- Address: NORFOLK NAVAL SHIPYARD, PORTSMOUTH, Virginia, 23709, United States
- Zip Code: 23709
- Zip Code: 23709
- Record
- SN04734618-W 20171109/171107231758-4c6d17c504d7fa5483d28a48e480d24e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |