SOLICITATION NOTICE
J -- JACKET, LINER AND PANTS REPAIR - RFQ
- Notice Date
- 11/30/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 812320
— Drycleaning and Laundry Services (except Coin-Operated)
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Training Center (TRACEN) Cape May, 1 Munro Avenue, Mission Support Building, Room 212A, Cape May, New Jersey, 08204-5092, United States
- ZIP Code
- 08204-5092
- Solicitation Number
- 70Z04218QQNT301000
- Point of Contact
- christopher j. moulton,
- E-Mail Address
-
christopher.j.moulton@uscg.mil
(christopher.j.moulton@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- WAGE RATES RFQ RFI SOW SCOPE OF WORK 1. GENERAL REQUIREMENTS: The work consists of providing all labor, materials, and equipment as required for pick up, drop off, and repairs of Gortex jackets, liners and pants. 2. COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK: Upon acceptance the Contractor shall commence work on 02 January 2017. The contractor is required to arrange pickup of the Gortex and transportation to their facility. Necessary repairs shall be satisfactory completed and returned within 15 days of receipt at vendor's facility or in person pickup by vendor from CG. 3. SCOPE OF WORK: 1. Contractors will pickup Gortex jackets, liners and/or pants (not to exceed 50 items per pickup) from Sexton Hall at U.S. Coast Guard Training Center Cape May, NJ. Contractor will be responsible for transportation from and to Sexton Hall. Frequency will NOT exceed one shipment per week but will vary significantly. 2. The contractor will inspect and conduct needed repairs to Gortex jackets, liners and/or pants, including but not limited to malfunctioning zippers, missing buttons, damaged snaps, or ripped Velcro. 3. Contractors will provide a written all-inclusive price for repairs that were conducted. 4. Contractors will then return satisfactory repaired Gortex jackets, liners and/or pants to Sexton Hall at U.S. Coast Guard Training Center Cape May no later than 15 days after receipt at vendor's facility or in person pickup by vendor from CG. If vendor is not local, vendor must arrange for transport of items from CG to vendor and return AT VENDORS COST. There is no guarantee that the quantities on the pricing schedule will be met-they are estimates. 5. Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, repair/replacement work will follow the applicable standard for the item(s) being repaired/replaced and meet or exceed quality and styling of replaced item(s). The color of the replaced part will be matched on the replacement. MILITARY SPECIFICATIONS MIL-T-3530 Thread and Twine: Mildew Resistant or Water Repellent Treated MIL-PRF-5038 Tape, Textile and Webbing, Textile, Reinforcing Nylon MIL-DTL-32072 Thread, Polyester MIL-C-43701 Cord, Elastic, Nylon or Polyester COMMERCIAL ITEM DESCRIPTIONS A-A-50186 Cloth, Buckram, Woven and Non-Woven A-A-50199 Thread, Polyester Core, Cotton- or Polyester-Covered A-A-52110 Cloth, Plain Weave, Polyester/Cotton for pockets (Water Repellant) A-A-55126 Fastener, Tapes, Hook and Loop, Synthetic A-A-55634 Zippers (Fasteners, Slide, Interlocking) Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2). NAVY CLOTHING AND TEXTILE RESEARCH FACILITY NCTRF PD 6-14 Cloth, Waterproof and Moisture Vapor Permeable (Copies of this document are available at the Navy Clothing and Textile Research Facility, Kansas Street, Natick, MA or the procuring activity) Non Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2). AMERICAN SOCIETY FOR TESTING AND MATERIALS ASTM D 751 Standard Test Methods for Coated Fabrics ASTM D 6193 Standard Practice for Stitches and Seams (Copies are available for purchase on-line at www.astm.org. or from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19426-2959.) AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC Test Method 135 Dimensional Changes of Fabrics after Home Laundering AATCC 1993 Standard Reference Detergent and Laundry Detergents in General (Copies are available on-line at http://www.aatcc.org or from the American Association of Textile Chemists and Colorists, P.O. Box 12215, research Triangle Park, NC 27709-2215.) AMERICAN SOCIETY FOR QUALITY (ASQ) ANSI/ASQ Z1.4 Sampling Procedures and Tables for Inspection by Attributes (Copies are available on-line at http://www.asq.org or from the American Society for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.) MILITARY SPECIFICATIONS MIL-C-43701 Cord, Elastic, Nylon or Polyester COMMERCIAL ITEM DESCRIPTION A-A-50128 Cloth, Interlining, Nonwoven A-A-50199 Thread, Cotton Covered, Polyester Core A-A-52110 Cloth, Plain Weave, Polyester/Cotton for Pockets (Water Repellant) A-A-55126 Fastener, Tape, Hook and Loop A-A-55634 Fasteners, Slide FEDERAL SPECIFICATIONS V-B-871 Button, Sewing Hole, and Button Staple (Plastic) (Copies of these documents are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. Non Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract (see 6.2). AMERICAN SOCIETY FOR TESTING AND MATERIALS ASTM D 737 Standard Test Method for Air Permeability of Textile Fabrics ASTM D 1777 Standard Test Method for Thickness of Textile Materials ASTM D 3512 Standard Test Method for Pilling Resistance and Other Related Changes of Textile Fabrics ASTM D 3776 Standard Test Method for Mass Per Unit Area (Weight) of Fabric ASTM E 96 Standard Test Method for Water Vapor Transmission of Materials (Copies are available for purchase on-line at www.astm.org. or from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19426-2959.) AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS AATCC TM 8 Colorfastness to Crocking: Crockmeter Method AATCC TM 16 Colorfastness to Light AATCC TM 22 Water Repellency: Spray Test AATCC TM 61 Colorfastness to Laundering, Home and Commercial: Accelerated AATCC TM 135 Dimensional Changes in Automatic Home Laundering of Woven Fabrics (Copies are available for purchase on-line at www.aatcc.org or from the American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215.) AMERICAN SOCIETY FOR QUALITY (ASQ) ANSI/ASQ Z1.4 Sampling Procedures and Tables for Inspection by Attributes (Copies are available on-line at http://www.asq.org or from the American Society for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.) 4. SITE VISIT: N/A 5. DESIGNATED POC: The primary Point of Contact for this project is Mr. Tom Dougherty @ (609) 898-6539. The secondary point of contact is CPO Todd Grote 609) 898-6533. Mr. Dougherty is serving as COR for this contract. 6. CONDITIONS AFFECTING THE WORK: N/A 7. AFTER AWARD OF THE CONTRACT: After the contract is awarded the Coast Guard POC will contact the contractor to arrange pickup and delivery schedule. 8. ORAL MODIFICATION: No oral statement of any person other than the Contracting Officer shall in any manner or degree, modify or otherwise affect the terms of this contract. 9. WORKMANSHIP: All work shall be satisfactorily accomplished to as near the standard as practical of a new Gortex jacket, liner and pants. A new Gortex jacket, liner and pants will be available for Contractor inspection. 10. PERMITS: The Contractor shall without additional expense to the Government, obtain all appointments, licenses, and permits required for the prosecution of the work. The Contractor shall comply with all applicable Federal, State and local laws. 11. CLEAN UP: N/A 12. WORK OUTSIDE REGULAR HOURS: N/A 13. UPON COMPLETION OF WORK: The COR will provide inspection/acceptance of work. 14. IDENTIFICATION OF CONTRACTOR PERSONNEL AND VEHICLES: The Contractor shall provide a detailed list of all employees to the POC five (5) days prior to commencing work. The employee list shall contain the employee's full name, date and place of birth, current address, and last four (4) of SSN. Training Center Cape May Security Officer, will be given a copy of the employee list and grant access for entry. Each Contractor provided vehicle or towed trailer shall show the Contractor's name so that it is clearly visible on the vehicle. A valid state license plate and safety inspection sticker is required. All vehicles operated on Government property shall be maintained in a good state of repair. 15. ENVIRONMENTAL PROTECTION REQUIREMENTS: Abide by all local, state and federal regulations. #
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGTCCM/70Z04218QQNT301000/listing.html)
- Place of Performance
- Address: Contractors will pickup Gortex jackets, liners and/or pants (not to exceed 50 items per pickup) from Sexton Hall at U.S. Coast Guard Training Center, 1 Munro Ave., Cape May, NJ. Contractor will be responsible for transportation from and to Sexton Hall., CAPE MAY, New Jersey, 08204, United States
- Zip Code: 08204
- Zip Code: 08204
- Record
- SN04753371-W 20171202/171130231906-c028de878f3ff48d4c1b72b9788abb96 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |