MODIFICATION
J -- COMFRC Equipment Industry Day
- Notice Date
- 1/11/2018
- Notice Type
- Modification/Amendment
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department, Hwy. 547 Attn:B562-3C, Lakehurst, New Jersey, 08733-5083
- ZIP Code
- 08733-5083
- Solicitation Number
- N6833517R0420
- Point of Contact
- Thomas Kracinovich, Phone: 732-323-7547
- E-Mail Address
-
thomas.kracinovich@navy.mil
(thomas.kracinovich@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- Note: The previous desription is deleted and replaced bythe following: Maintaining Industrial Capability: A Naval Aviation Equipment Readiness Challenge COMFRC Industry Day Event Commander, Fleet Readiness Centers (COMFRC) is sponsoring an unclassified "Maintaining Industrial Capability: A Naval Aviation Equipment Readiness Challenge" Industry Day event on March 6th and 7th 2018. The event will be hosted by Fleet Readiness Center Southwest (FRCSW) in San Diego, CA. The purpose of the Industry Day event is to provide the opportunity to dialogue with Industry on COMFRC's current and anticipated equipment readiness challenges, and inquire into Industry's technical capabilities. Fleet Readiness Centers (FRCs) provide depot Maintenance, Repair, Overhaul, and Upgrade (MRO&U), In-service Repair (ISR), and manufacturing services in support of fixed and rotary wing aircraft, aircraft engines, aeronautical components, and support equipment across the Naval Aviation Enterprise. Three Fleet Readiness Centers, Centers for Industrial and Technical Excellence (CITEs), support Naval Aviation depot maintenance requirements: Fleet Readiness Center Southwest (FRCSW), San Diego, California; Fleet Readiness Center East (FRCE), Havelock, North Carolina; and Fleet Readiness Center Southeast (FRCSE), Jacksonville, Florida. Across the industrial FRCs, product lines are challenged by obsolescence issues - materially-aged, and technologically-dated equipment negatively impacting the command's capacity to support 4th and 5th generation weapon systems. COMFRC is hosting this market research event to seek commercial industry options for the procurement, replacement, upgrade, repair, or repair training of aged equipment used to maintain aeronautical systems: to include hydraulic, pneumatic, avionic, mechanical, manufacturing, and blasting systems. In addition, to assess commercial innovations that provide for the management of equipment databases that maintain the associated historical maintenance records, equipment status, equipment location, and other logistical requirements. The industrial FRCs will present examples of test benches which have been identified to possess aging components, outdated operational systems, or deficient capabilities (see high-level equipment list following this announcement). COMFRC is seeking innovative, cost-effective solutions from Industry to these aforementioned complex challenges as well as, opportunities for equipment consolidation, footprint reduction, and common solutions across multiple locations. Vendors considering attendance to this event should submit a three (3) to five (5) page technical capability statement, via email to the POCs listed below, by 16 February 2018. Please note the cover/title page and table of contents (if provided) will not count against your three (3) to five (5) page limits. Each acronym used shall be spelled out in the text the first time it appears in your technical capability statement. Attached hereto, you will find a list of vendor questions for consideration when preparing your technical capability statement. Please note Technical Capability Statement submits will not be evaluated for contract award. Lastly, clearly indicate any proprietary data in your responses. Questions related to this announcement may be submitted via email to the POCs listed below. POC #1: Thomas Kracinovich, NAVAIR 2.5.2 Contracting Officer, thomas.kracinovich@navy.mil POC #2: Kimberly Brockington, NAVAIR 6.1.3 Senior Acquisition Planner, kimberly.brockington@navy.mil The final agenda, security requirements, and administrative details, such as location, directions, parking information, etc., will be posted in a forthcoming announcement. THIS IS NOT A REQUEST FOR PROPOSAL. The Government is not obligated to and will not pay for any information received from potential sources as a result of this posting. The Government will not reimburse the attendees for any cost associated with participation or attending the Industry Day, and is under no obligation to award any related contract associated with this event. Additionally, this announcement in no way commits the Government to issue a solicitation. The requested information is to assist the United States Navy in conducting Market Research. (http://www.fedbizopps.gov/).   High Level Equipment List and Sample Specifications Non-Destructive Test Equipment and Inspection Equipment: C-Scan X-Ray Test Stands/Benches: Electronic Hydraulic Pressure Industrial Processes: Cooling Heating Autoclaves (Composite, Rubber, and Plastic) Cleaning Lines Plasma Flame spray Welding Machining: Lathes CNC Mills Grinder Benders Brakes Laser Cutting Additive Manufacturing: 3D FDM Selective Laser Stereolithography Sample of specifications for test stands in Engine Fuel Accessories Fluids: MIL-PRF-7024 Type II, MIL-PRF-680 Type II and III, MIL-PRF-23699, MIL-H-5606, MIL-L-6081 Grade 1010, 99% Isopropyl, Dow Corning 210H, Dow Corning 510, Pressures: 0 - 10,000 psi Temperature: 70F - 250F Flows: static - 500 GPM's Drive Motors: 1/8 hp - 50 hp, 0-8,000 RPM Vacuum: 0-28 inHg Compressed Air: 0- 800 psi, 0 - 200 CFM Sample of specifications for test stands in Hydraulic Components MIL-PRF-83282D Hydraulic Fluid Pressure: 0 - 4500 PSI Flow: 0 - 20 GPM MIL-PRF-83282D Hydraulic Fluid Proof Pressure: 8000 PSIG @ 10.5 GPM, 120 ⁰F High Pressure Circuit: 5000 PSIG @ 35 GPM, 200 ⁰F Low Pressure Circuit: 300 PSIG @ 90 GPM, 275 ⁰F Pneumatic Pressure: 0 - 10,000 PSI Measurable Variable Speed Drive 0 - 12,500 RPM 0 - 900 lbf-in MIL-PRF-83282D Hydraulic Fluid Proof Pressure: 0 - 7500 PSI Pressure: 0 - 5000 PSI Flow: 0.1 - 10 GPM Temperature: 90 - 130 ⁰F Linear Variable Differential Transformer (LVDT) Power Supply 0 - 26 VAC, 400 Hz 0 - 30 VDC MIL-PRF-83282D Hydraulic Fluid Static Supply Pressure: 15,000 PSI max Supply Flow and Pressure: 35 GPM @ 4500 PSI max 25 GPM @ 5000 PSI max Temperature 160 ⁰F max Nitrogen System 5000 PSIG max Power Supply 0 - 30 VDC 0 - 30 AMP Sample of specification for rotary generator and electrical test stands 0-35,000 RPM 113-123 VAC 1, 3, 6, and 9 phase 380-420Hz 0-500 Amp load banks 0-30 mil vibrations Sample of specifications for heating processes 0-2,000⁰F, +/-10⁰F AMS2750E Pyrometry standard 0-1x10 - 8 Torr (vacuum)   Vendor Questions in support of Technical Capability Statement 1. What capability does your company have working in the aviation industry? 2. Are you a FAA (Federal Aviation Administration) certified repair station? 3. Does your company offer manufacturing and design capabilities of component test stands/equipment? If so, indicate for what types of component testing you specialize (i.e. electronic components, power generation/regulation/distribution, hydraulic components, fuel pumps, etc.)? 4. Describe your capability in manufacturing or maintaining aviation test stands/equipment. 5. Does your company provide on-site maintenance services for industrial, automated test, or manufacturing equipment? 6. If your company manufactures test stands/equipment, are you capable of providing continued on-site maintenance for those stands? 7. Does your company specialize in maintaining industrial manufacturing equipment (e.g. CNC machine, grinders, milling machines, lathes, etc.)? If yes, please provide an example. 8. Does your company specialize in maintaining or providing industrial processing solutions (e.g., tank liners, etc.)? If yes, please provide an example. 9. Describe your technical service support and maintenance for newly installed equipment. 10. How does your company provide updates to software revisions on installed equipment? 11. Identify Government agencies for which you have received a contract award. Please specify your contractor relationship, i.e. Prime Contractor or Subcontractor, for each contract award listed. 12. Are you a small business and are you registered in SAMS (System for Award Management)? 13. Is your company capable of supporting only a local site (San Diego, Jacksonville, or Cherry Point) or do you have a national footprint capable of serving all three sites? 14. Does your company have the capability to provide training on industrial maintenance equipment? 15. Does your company have the capability to provide training on industrial manufacturing equipment? 16. If you have the capability to manufacture test stands, do they include MHM (Machine Health Monitoring) capability? 17. Does your company have the capability to provide maintenance and services on vertical storage equipment installations (locally referred to as "stackers")? 18. Does your company have a completed DD Form 2345 (Militarily Critical Technical Data Agreement)? If yes, please provide a copy with the responses to the other questions. Added: <input type="hidden" name="dnf_class_values[procurement_notice][description][1][added_on]" value="2017-09-29 09:18:47">Sep 29, 2017 9:18 am Modified: <input type="hidden" name="dnf_class_values[procurement_notice][description][1][modified_on]" value="2018-01-11 14:09:54">Jan 11, 2018 2:09 pm Track Changes
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N6833517R0420/listing.html)
- Record
- SN04787783-W 20180113/180111231216-aeccdcc822cc7b05509dabe170d00e91 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |