SOURCES SOUGHT
66 -- refurbished PlasmaTherm/Unaxis 790 Reactive Ion Etch (RIE) System
- Notice Date
- 1/31/2018
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- AMD-SS18-08
- Archive Date
- 2/24/2018
- Point of Contact
- Forest Crumpler, Phone: 3019756753
- E-Mail Address
-
forest.crumpler@nist.gov
(forest.crumpler@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- FAAPS Number: 55180 The National Institute of Standards and Technology (NIST) seeks information on commercial vendors that are capable of providing a refurbished PlasmaTherm/Unaxis 790 Reactive Ion Etch (RIE) System to support nanofabrication in the Center for Nanoscale Science and Technology (CNST) user facility. The system will be sited and used as a shared resource accessible to researchers from industry, academia, NIST, and other government agencies in the NIST NanoFab. The RIE System is a pattern transfer tool that uses chemical plasma to fabricate three-dimensional structures in varied substrate materials. Applications include fabricating nano-semiconductor and nano-photonic devices. The NanoFab currently operates two PlasmaTherm/Unaxis 790 RIE systems that are heavily used to fabricate a wide variety of devices with different chemical etching gases and substrate materials. However, the current tools cannot meet the requirements of a growing number of NanoFab users. More and more materials are being etched. The capacity of the existing RIE systems is becoming a "bottle-neck" for plasma etching in the NanoFab. To increase the NanoFab's capacity to serve users, the NanoFab has a need for another PlasmaTherm/Unaxis 790 RIE system. This additional RIE shall be configured identically to our existing RIEs so processes can be run on any of the three systems with similar results. General Requirements: •The system shall be a PlasmaTherm/Unaxis 790 RIE •The system shall be reconditioned to OEM specifications including new process kit, shower head, base plate, and dark shield. •The system shall be a complete turnkey system including all vacuum pumps, heat exchangers, RF supplies, etc. only requiring facilities and gas connections to operate. •The vacuum pump shall be a dry pump. •The system shall use the PlasmaTherm Cortex control hardware and software system which is required to be compatible with our existing systems. •The system shall include six gas channels, CHF3, O2, Ar, SF6, CF4, and N2. •The system shall include an integrated optical emission endpoint system. •The system shall include full documentation and all system manuals. •The system shall include a one year warranty. •The system shall include tool startup and commissioning by a qualified field service engineer. •Startup must demonstrate key processes of oxide etch, nitride etch, photoresist etch, perform within 5% of the existing systems. After results of this market research are obtained and analyzed and specifications are developed for a vendor that can meet NIST's minimum requirements, NIST may conduct a competitive procurement and subsequently award a Purchase Order. If at least two qualified small businesses are identified during this market research stage, then any competitive procurement that resulted would be conducted as a small business set-aside. NIST is seeking responses from all responsible sources, including large, foreign, and small businesses. Small businesses are defined under the associated NAICS code for this effort, 334516, as those domestic sources having 1,000 employees or less. Please include your company's size classification and socio-economic status in any response to this notice. Companies that can provide the required etch system are requested to email a detailed report describing their abilities to forest.crumpler@nist.gov no later than the response date for this sources sought notice. The report should include achievable specifications and any other information relevant to your product or capabilities. Also, the following information is requested to be provided as part of the response to this sources sought notice: 1. Name of the company that manufactures the system components for which specifications are provided. 2. Name of company(s) that are authorized to sell the system components, their addresses, and a point of contact for the company (name, phone number, fax number and email address). 3. Indication of number of days, after receipt of order that is typical for delivery of such systems. 4. Indication of whether each instrument for which specifications are sent to forest.crumpler@nist.gov are currently on one or more GSA Federal Supply Schedule contracts and, if so, the GSA FSS contract number(s). 5. Any other relevant information that is not listed above which the Government should consider in developing its minimum specifications and finalizing its market research.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/AMD-SS18-08/listing.html)
- Place of Performance
- Address: 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN04805357-W 20180202/180131231156-2fe30129abda889e97e3e368058599d0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |