SOURCES SOUGHT
36 -- Air Turbine Starter Test Stands - PD #002 Process Air System - PD #001 ATSTS - Q&A ATSTS - Contractor Capabilities Questionnaire ATSTS - Section M - SOW ATSTS - PD #003 Compressed Air System - RFIs
- Notice Date
- 1/31/2018
- Notice Type
- Sources Sought
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- FA8224-18-R-0020
- Point of Contact
- Shawna Dudis, Phone: 801-586-8596, Tyler V Fitz, Phone: 801-777-5486
- E-Mail Address
-
Shawna.Dudis@us.af.mil, Tyler.Fitz@us.af.mil
(Shawna.Dudis@us.af.mil, Tyler.Fitz@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Request For Information for interested parties to complete and submit to the POCs referenced at Notice FA8224-18-R-0020. Draft 'Final' copy of PD #003 for 300psig Nominal Compressed Air System; dated 01/04/2018 Draft 'Tracked Changes' copy of PD #003 for 300psig Nominal Compressed Air System; dated 01/04/2018 Draft 'Final' copy of Statement of Work for Air Turbine Starter Test Stands and Process Air Systems; dated 01/04/2018 Draft 'Tracked Changes' copy of Statement of Work for Air Turbine Starter Test Stands and Process Air Systems; dated 01/04/2018 Draft 'Tracked Changes' copy of Section M, dated 01/29/2018 Draft 'Final' copy of Section M; dated 01/29/2018 Questionnaire for interested parties to complete and submit to the POCs referenced at Notice FA8224-18-R-0020. Compiled Questions & Answers through 01/04/2018 Draft 'Final' copy of PD #002 for Process Air System for Pneumatic Component Testing; dated 01/04/2018 Draft 'Tracked Changes' copy of PD #002 for Process Air System for Pneumatic Component Testing; dated 01/04/2018 **Please note, this Sources Sought, FA8224-18-R-0020, replaces the Sources Sought identified as FA8224-16-R-0074. Any future updates related to the Air Turbine Starter Test Stands at Hill Air Force Base will be posted under this notice.** This is a Sources Sought to determine potential sources and elicit feedback from industry regarding the effort identified as Air Turbine Starter (ATS) Test Stands. This notice shall not commit the Government to issue a solicitation, nor to award a contract. Responses submitted by interested parties will not be considered a proposal and the Government will not be responsible for any costs incurred by contractors responding to this notice. Copies of submitted information may be reproduced for government review. The United States Air Force at Ogden Air Logistics Complex is conducting market research seeking capable sources to remove, install, and replace ATS Test Stands. Three existing ATS Test Stands shall be removed and replaced with two new ATS Test Stands that meet the requirements of Purchase Description (PD) #001. In addition, the removal of the existing facility 300psi Air System shall be replaced with a new 125psi Air System meeting the requirements of PD #002; a new 300psi Air System shall be installed in the existing facility meeting the requirements of PD #003. The successful offeror shall provide all necessary equipment, supplies, labor, management, etc. for the entire ATS system in accordance with the requirement specifications. System requirements include removal, delivery, installation, and training associated with the two new ATS Test Stands as well as ancillary equipment, e.g. air systems. Interested parties are requested to submit responses to the attached Contractor Capabilities Questionnaire (CCG) and Request For Information (RFI) #1, along with any feedback or questions related to the PDs, Statement of Work (SOW), and Section M. These submissions should be sent via email to the primary contact; please courtesy copy the secondary contact as well as Costadena.Bournakis@us.af.mil. Those contractors that previously submitted responses to FA8224-16-R-0074 do not need to resubmit any prior correspondence. PD #001 contains information that has been designated as "export controlled". In order to access the protected folder containing PD #001, vendors must be certified as a U.S. or Canadian contractor by the Joint Certification Program (JCP) administered by the Defense Logistic Information Service (DLIS). To apply for this certification, interested parties must submit a DD2345. Once approved, access will be granted to the protected folder by the Contracting Officer. Those vendors having already completed the certification process need not reapply in order to be granted access. Due to the significant amount of information posted at FA8224-16-R-0074, only the most recent versions of the draft SOW and PDs (#001 - #003), wholly new draft documents, and the CCG will be available at this notice. At this time, the prior notice remains accessible for review of the previously posted documentation. Government Request: * Submit responses to the CCG and RFI #1 * Submit feedback and questions related to PDs #001-003 * Submit feedback and questions related to the SOW and Section M * Please provide submissions, along with any other general questions or feedback, NLT COB on 1 March 2018. Early submissions are welcome and appreciated.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8224-18-R-0020/listing.html)
- Place of Performance
- Address: Hill Air Force Base, Utah, 84056, United States
- Zip Code: 84056
- Zip Code: 84056
- Record
- SN04805377-W 20180202/180131231206-760da5f3244d96544618fccefe743ce5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |