SOLICITATION NOTICE
71 -- LOCKER
- Notice Date
- 2/1/2018
- Notice Type
- Presolicitation
- NAICS
- 332439
— Other Metal Container Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPMYM218Q1184
- Archive Date
- 2/13/2018
- Point of Contact
- ARTURO R MACABALITAO, Phone: 3604766075
- E-Mail Address
-
ARTURO.R.MACABALITAO@DLA.MIL
(ARTURO.R.MACABALITAO@DLA.MIL)
- Small Business Set-Aside
- Total Small Business
- Description
- LOCKER FFP 12" W X 18" D X 78" H, 1 TIER, 1 WIDE, MUST BE PREASSEMBLED, 6" LEGS STEEL W/POWDER COAT FINISH (SAND) MFR: TENNSCO, P/N STS1218721, OR: A & E OFFICE AND INDUSTRIAL SUPPLY LLC P/N# TNNSTS1218721SD BRAND NAME OR EQUAL ITEMS ARE REQUIRED FOR WATERFRONT PROJECT SUPPORT. ***MUST BE PREASSEMBLED*** SALIENT CHARACTERISTICS Dimensions - 12 inches wide 18 inches deep 72 inches tall 6 inch legs The locker frames and doors must be durable and constructed from 16-guage Steel and be pre­assembled to be considered acceptable. The Lockers shall be single tier and either welded and/or riveted during manufacturer assembly. Door reinforcements shall be installed to improve stiffness and noise control. Louvers shall be located on the top and bottom of the door for ventilation purposes and be flush to the plane of the door. Door hinges shall be a security type (pins are inaccessible) and durable enough to last the life cycle of the lockers. Rubber bumpers installed on the door for noise and vibration dampening. Locking bars shall be constructed of steel and latches shall be spring actuated. Exterior opening handles need to be recessed into the door and equipped to accept a standard padlock. Shelf construction needs to be at a minimum, triple folded to prevent exposed sharp edges. The locker shall include a Hat shelf large enough to fit a standard issued hard hat. Each locker shall have a minimum of 3 coat hooks and 1 coat rod. The finish shall be durable and powder coated is preferred. Finish shall be Sand color.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPMYM218Q1184/listing.html)
- Place of Performance
- Address: BREMERTON, Washington, 98314, United States
- Zip Code: 98314
- Zip Code: 98314
- Record
- SN04806614-W 20180203/180201231238-d76a4849fb09e0d834c1b158921059d0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |