MODIFICATION
29 -- Starter NSN 2920-14-497-4269 for 10 kW Auxiliary Power Unit
- Notice Date
- 4/22/2018
- Notice Type
- Modification/Amendment
- NAICS
- 335312
— Motor and Generator Manufacturing
- Contracting Office
- Department of the Army, U. S. Army Materiel Command, Headquarters, US Army Materiel Command, 9301 Chapek Road, Ft. Belvoir, Virginia, 22060
- ZIP Code
- 22060
- Solicitation Number
- 903A_201801
- Archive Date
- 5/21/2018
- Point of Contact
- Edward G Engbert, Phone: 4433956222, Brian Kim, Phone: 443.395.6261
- E-Mail Address
-
edward.g.engbert.civ@mail.mil, brian.kim3.civ@mail.mil
(edward.g.engbert.civ@mail.mil, brian.kim3.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a market survey to locate additional sources of supply for the Starter, Engine, Electrical NSN 2920-14-497-4269; KUBOTA LTD, OVERSEAS SERVICE P/N 19883-63010, CAGE Code S8029; KUBOTA TRACTOR CORP P/N 19883-63010, CAGE Code 0XWR1. Suppliers capable of supplying the subject part number must indicate by writing to Commander, USA CECOM, ATTN: Edward Engbert, RDER-PRP-G, 6590 Reconnaissance Street, Building 6010, Space 226-21, Aberdeen Proving Ground, MD 21005 or by email to: edward.g.engbert.civ@mail.mil. Insert the NSN in email correspondence to include the following words in the subject line as follows "NSN 2920-14-497-4269". Interested vendor responses must include documentation such as test results, copy of purchase orders if the supplier was a vendor to the listed source or a statement from listed source demonstrating that the supplier can supply the Army with a unit from the listed source. The response should also include production lead times, number of years parts will be available, price break ranges if applicable, part number & CAGE # of proposed parts, or any other information that could affect the acquisition, supply and delivery of the parts. The Government will consider parts from other sources that have the same form, fit, and function as the required parts, Alternate parts would have to pass extensive performance and qualification testing to ensure the parts meet the Military's requirements. The cost of which would be considered in the acquisition decision. Successful supplier may be required to warrant that the item supplied will satisfactorily perform when used for the purpose intended by the Army. Please complete the following questions. If a question does not apply, please enter N/A or non-applicable. 1) Provide a brief summary of your company and its core competencies. Describe the role that your company provides in the manufacture and assembly of the APU and its separate components. 2) Please provide the following Point of Contact information on all responses: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: CAGE Code: DUNS Number: 3) Has your Company supplied this part to the Army or other Government Agencies in the past? if so please provide the Agency Contract Number, Point of Contact (POC), e-mail address, phone number, and dollar value of the Contract? 4) Describe your manufacturing and supply capabilities in terms of stock on hand for production start, minimum lead time notification periods, minimum production order requirements, price breaks for volume purchases, what a full production rate is and how long it takes to achieve after contract award, and if initial production can be expedited for a fee, any additional cost for expediting production, and the expedited production lead time. 5) Does your Company hold a current Government multi-use contract, such as a GSA Federal Supply Schedule contract, for this engine? If so, please provide the current contract number. 6) Describe how your company addresses production quality control in terms of qualification testing during initial production and periodic testing during ongoing production. How do these capabilities lend themselves to the production of the subject part of interest? 7) Is the part you are proposing available in the commercial market place? 8) If additional time is needed to respond to this inquiry, please contact Edward Engbert. For more information contact Edward Engbert, Edward.g.engbert.civ@mail.mil; (443) 395-6222. Responses to this announcement must be received no later than the deadline of midnight EST on Monday, 7 May 2018. Notice: The Government will not pay for any information received or costs incurred in preparing the response to the market survey. Therefore any cost associated with the market survey submission is solely at the interested vendor's expense. This Request for Information (RFI) is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and to assist in making future acquisition strategy decisions. This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this RFI or reimburse any costs associated with the preparation of responses to this RFI.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/USAMC/W73QKK/903A_201801/listing.html)
- Place of Performance
- Address: DLA Land at Aberdeen, 6001 COMBAT DRIVE, APG, Maryland, 21005-1846, United States
- Zip Code: 21005-1846
- Zip Code: 21005-1846
- Record
- SN04897369-W 20180424/180422230034-062571bfe029fce3c88aaa89266e51e5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |