MODIFICATION
73 -- FOOD SERVICE EQUIPMENT
- Notice Date
- 4/25/2018
- Notice Type
- Modification/Amendment
- Contracting Office
- Fort Hood, Fort Hood, TX 76544
- ZIP Code
- 76544
- Solicitation Number
- HOOD407THLR0001
- Response Due
- 5/1/2018
- Archive Date
- 10/28/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is HOOD407THLR0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-97. The associated North American Industrial Classification System (NAICS) code for this procurement is 2005-97 with a small business size standard of $11.00M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-05-01 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Hood, TX 76544 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: SERVING COUNTER, HOT FOOD, ELECTRIC Duke Manufacturing Model No. TEHF 88SS Thurmaduke Hot Food Unit, mobile, electric, 88"W x 32"D x 36"H, 16ga stainless steel top, (6) stainless steel heat wells, drains, copper manifolds, (1) valve, thermostats, dish shelf, 20ga stainless steel body & undershelf, 5" swivel casters (2 with brakes), 6 ft cord with plug,cULus, UL EPH Classified 1 ea 208v/60/1 ph, 5400 watts, 26.0 amps 1 ea Electric heat well options 1 ea Solid stainless steel trayslide, 16ga stainless steel, (2) rubbing tracks,on (3) stainless steel fixed brackets 1 ea Located on customer's side 1 ea #956 460 6 Serving shelf with glass protector panel, 18ga 300 series stainless shelf, 10 1/2"wide, 20"high, 86 1/2"long, 3/4" square stainless tube posts, (2) 1/4" thick glass panels & 1/4" acrylic end guards., 6, EA; LI 002: CONVECTION STEAMER, GAS Cleveland Range Model No. 24CGA10 Steamcraft ® Ultra 10 Convection Steamer, pressureless, gas, 2 compartments, (5) 12 x 20 x 2 1/2 pans/compartment capacity, manual controls, 60 minute mechanical timer & manual (continuous steaming) bypass switch, left hand hinged door, controls on right, steam shut off switch, 1 standard treated & tap water connection, stainless steel construction, 6" adjustable legs with flanged feet, 125,000 BTU. 1 ea 1 year parts & labor warranty, standard 1 ea 5 year pro rated parts warranty on boilers & steam generators 1 ea 3 year Convection Steamer Door Warranty, standard 1 ea Performance start up included at customer request after equipment is installed (Free Water Quality Check included) (contact Cleveland Sales Representative for details) 1 ea QTI1 CR Optipure Water Treatment System, dual cartridge, reduces sediments over 0.5 microns, reduces chlorine, includes (1) CTOS Q10 Catalytic Carbon Filter & (1) CTOS QCR activated carbon filter 1 ea Second year limited warranty on water related parts only when purchasing a steamer and filter from Cleveland. Must include a completed Performance Start Up (See Cleveland warranty statement for details) 1 ea Gas type to be specified 1 ea (VOS115) 120v/60/1 ph, 2.0 amp, 2 wire (DO NOT connect to GFI outlet), 5, EA; LI 003: SERVING COUNTER, COLD FOOD Duke Manufacturing Model No. AHC 6M N7 Duke Salad Bar, 88"L, 24 1/2"W, 36"H, 20ga stainless steel top, NSF 7 standards mechanical cold pan, 8" deep stainless steel liner, 84 1/2" x 21 3/4" opening, 1" brass drain & plug, removable stainless steel grille on end, 20ga paint grip stee1 ea 120v/60/1 ph, 4.8 amps, 6' cord with NEMA 5 15P, 1/3 HP compressor 1 ea Special stainless steel body finish in lieu of powder coat exterior. 1 ea Counter top options 1 ea 14ga stainless steel top in lieu of standard 2 ea Solid trayslide, 12 1/4" wide, 16ga stainless steel, (2) rubbing tracks,on (3) stainless steel fixed brackets, & mounted 34" high (specify any special height) 1 ea Located on both sides (must select (2) shelves/trayslides) 2 ea For stainless steel hinged bracket in lieu of standard fixed bracket 1 ea with a canopy or overshelf option 1 ea Stainless steel ends in lieu of standard painted steel $62.56 1 ea TS580 88 Thurmaduke Designer Sneeze Guard, 87 5/8"W, (2) sided self service style, 2 tier with glass shelves, adjustable front glass,painted end panels & 1/4" acrylic end guards (NOTE: upper deck for wrapped food only), cULus, UL EPH Classified 1 ea Stainless steel frame in lieu of standard painted steel 1 ea Stainless steel ends in lieu of standard painted steell body, 5" dia. swivel casters (2 with brakes), 6' cord & plug 1 ea 120v/60/1 ph, 4.8 amps, 6' cord with NEMA 5 15P, 1/3 HP compressor 1 ea Special stainless steel body finish in lieu of powder coat exterior 1 ea Counter top options 1 ea 14ga stainless steel top in lieu of standard $212.52 2 ea Solid trayslide, 12 1/4" wide, 16ga stainless steel, (2) rubbing tracks, on (3) stainless steel fixed brackets, & mounted 34" high (specify any height 1 ea Located on both sides (must select (2) shelves/trayslides) 2 ea For stainless steel hinged bracket in lieu of standard fixed bracket 1 ea with a canopy or overshelf option 1 ea Stainless steel ends in lieu of standard painted steel $62.56 1 ea TS580 88 Thurmaduke Designer Sneeze Guard, 87 5/8"W, (2) sided self service style, 2 tier with glass shelves, adjustable front glass,painted end panels & 1/4" acrylic end guards (NOTE: upper deck for wrapped food only), cULus, UL EPH Classified 1 ea Stainless steel frame in lieu of standard painted steel 1 ea Stainless steel ends in lieu of standard painted steel, 6, EA; LI 004: CONVECTION OVEN, GAS Vulcan Model No. VC44GD Convection Oven, gas, double deck, standard depth, solid state controls, electronic spark igniters, 60 minute timer, 8" high legs, stainless steel front, top and sides, stainless steel doors with windows, 50,000 BTU each section, NSF, CSA Star, CSA Flame, ENERGY STAR ® 1 ea 1 year limited parts & labor warranty, standard 1 ea Gas type to be specified 1 ea (2) 120v/60/1 ph, (2) 1/2 HP, 16.0 amps total, (2) 6' cords with plugs,NEMA 5 15P, standard 1 ea Gas manifold piping included with stacking kit to provide single point gas connection 1 ea Solid doors in lieu of standard glass doors, top oven, 8, EA; LI 005: SOFT SERVE MACHINE SaniServ Model No. 407 Soft Serve/Yogurt Freezer, counter model, air cooled, self contained refrigeration, 1 head, 7 qt. mix capacity, welded steel frame, stainless steel exterior, automatic torque control, visual mix out system, 1/2 HP dasher, 1/2 HP compressor, UL, cUL, NSF 1 ea 1 year parts, 90 days labor, 5 year compressor & evaporator warranty 1 ea (R) 115v/60/1 ph, 15 amps 1 ea MS163018SX Equipment Stand, 18"W x 30"D x 30"H, stainless steel, for model 407 & DF200 1 ea P1909904 Swivel Casters, 4", set of (4 2 with brakes), for stainless steel equipment stands, 10, EA; LI 006: REFRIGERATED MERCHANDISER True Manufacturing Co., Inc. Model No. FLM 54~TSL01 Full Length Refrigerated Merchandiser, two section, True standard look version 01, (8) shelves, powder coated exterior, white interior with stainless steel floor, (2) double pane thermal insulated glass swing doors, LED interior lights, R290 Hydrocarbon refrigerant, 1/2 HP, 115v/60/1, 6.3 amps, NEMA 5 15P, cULus, UL EPH Classified, MADE IN USA 1 ea Self contained refrigeration standard 1 ea Warranty 5 year compressor (self contained only), please visit www.Truemfg.com for specifics 1 ea Warranty 3 year parts and labor, please visit www.Truemfg.com for specifics 1 ea Left door hinged left, right door hinged right standard, 12, EA; LI 007: FOOD SLICER, ELECTRIC Univex Model No. 8713S Premium Series Slicer, variable speed automatic, gravity feed, 13" diameter knife, variable slice thickness 0" 0.875" (0.22mm), 21 47 strokes per minute, top mounted knife sharpener, gear driven, anodized aluminum construction,.37kW, 1/2 HP motor, cETLus, NSF 1 ea One year, on site parts & labor warranty, see model "WARRANTY SHEET" for details 1 ea 115v/60/1 ph, 5.4 Amps, 8, EA; LI 008: PASS THRU REFRIGERATOR True Manufacturing Co., Inc. Model No. STA2RPT 2S 2S HC SPEC SERIES ® Pass thru Refrigerator, two section, stainless steel front & sides, (2) stainless steel doors front & rear with locks, cam lift hinges, digital temperature control, aluminum interior, (6) chrome shelves, LED interior lights, 5" castors, R290 Hydrocarbon refrigerant,1/2 HP, 115v/60/1, 5.9 amps, NEMA 5 15P, MADE IN USA 1 ea Warranty 3 year parts and labor, please visit www.Truemfg.com for specifics 1 ea Warranty 5 year compressor (self contained only), please visit www.Truemfg.com for specifics 1 ea Thermometer side: Left door hinged on left, right door hinged on right, standard 1 ea Rear: Left door hinged on left, right door hinged on right, standard 1 st 5" castors, set of 4, standard, 7, EA; LI 009: PASS THRU HEATED CABINET True Manufacturing Co., Inc. Model No. STA2HPT 2S 2S SPEC SERIES ® Pass thru Heated Cabinet, two section, stainless steel front & sides, (2) stainless steel doors front & rear with locks, cam lift hinges, digital temperature control, aluminum interior, (6) chrome shelves, 5" castors, 3000W, 208 230v/60/1 (requires hard wiring),cULus, UL EPH Classified, MADE IN USA 1 ea Warranty 3 year parts and labor, please visit www.truemfg.com for specifics 1 ea Thermometer side: Left door hinged on left, right door hinged on right, standard 1 ea Rear: Left door hinged on left, right door hinged on right, standard 1 ea (3) chrome shelves and shelf supports standard per section 1 st 5" castors, set of 4, standard, 7, EA; LI 010: TILTING SKILLET BRAISING PAN, GAS Vulcan Model No. VG30 Braising Pan, Gas, 30 gallon capacity, 36" wide open base, manual tilt,9" deep stainless steel pan with gallon markings, pouring lip & removable strainer, spring assist cover with drip edge, pan holder,thermostatic control, includes L faucet bracket, electric ignition, 12" stainless steel legs with adjustable flanged feet, 90,000 BTU 1 ea 1 year limited parts & labor warranty, standard 1 ea Gas type to be specified 1 ea 120v/60/1 ph, 9.0 amps, standard, 8, EA; LI 011: PLANETARY MIXER Univex Model No. SRM12 Food Mixer, countertop, 12 quart capacity, variable speed drive, includes removable SwingRing safety guard, stainless steel bowl, batter beater, wire whip & dough hook, and bowl scraper, 1/3 hp, cETLus, NSF, Made in USA 1 ea Two year, on site parts & labor warranty, see model "WARRANTY SHEET" for details 1 ea 115v/60/1 ph, 14.0 Amps 1 ea Metallic silver, 6, EA; LI 012: GAS FRYER, BATTERY Vulcan Model No. 2TR65AF PowerFry3 Fryer, gas, high efficiency, 42" W, (2) battery, 65 70 lb.capacity per vat, solid state analog knob control with melt cycles,ThreePass heat transfer system, electronic ignition, KleenScreen PLUS ® filtration system, twin baskets, stainless steel cabinet and fry tank, adjustable casters (2 swivel locking & 2 non locking), 160,000 BTU, CSA, NSF, ENERGY STAR ® 1 ea 1 year limited parts & labor warranty, standard 1 ea 10 year limited tank warranty, standard 1 ea Gas type to be specified ea ELVKIT VULNAT High elevation orifice natural gas conversion kit 1 ea 120v/60/1 ph, 1/3 hp, 6 amps, for filter 1 ea FRYMATE VX15 Frymate Holding Station, free standing or add on unit, 15 1/2" wide, 30 1/8" depth, stainless steel cabinet base, stainless steel top drain section with removable grease collector, set of 4 casters (2 locking), connecting strip and hardware included, (for 35 65 lb capacity gas or electric fryers) 1 ea COVER TANK Stainless steel tank cover/work surface top, for all 35 & 45 lb. gas fryers & Frymate VX15, 7, EA; LI 013: MILK DISPENSER Silver King Model No. SKMAJ2/C3 Majestic Series Milk Dispenser, double valve, refrigerated, accommodates 3, 5, or 6 gallon bags, includes (2) platforms, (2) crates,& shipboard legs, 1/10 HP, 115v/60/1 ph, 1.4 amps, 10, EA; LI 014: GAS COUNTERTOP GRIDDLE Vulcan Model No. VCCG60 AC Heavy Duty Griddle, countertop, gas, 60" W x 24" D cooking surface, 3/4" thick Rapid Recovery composite plate, (5) burners, solid state thermostat every 12", atmospheric type œU shaped aluminized steel burners, electronic spark ignition & pilot protection, wire knob guards,(2) drawers, stainless steel front, sides, front top ledge, front grease trough, 4" back & tapered side splashes, 4" adjustable legs, 150,000 BTU, NSF, CSA 1 ea 1 year limited parts & labor warranty, standard 1 ea Gas type to be specified 1 ea 120v/50/60/1 ph, 2 amp, NEMA 5 15P 1 ea STAND/C 60 Equipment Stand, universal, 61" W x 24" H, 1/2" marine edge, undershelf, stainless steel, 5" casters, 6, EA; LI 015: GAS COUNTERTOP GRIDDLE Vulcan Model No. VCCG36 IS Heavy Duty Griddle, countertop, gas, 36" W x 24" D cooking surface, 1"thick steel plate, (3) burners, solid state thermostat every 12", IRX infrared burner technology, electronic spark ignition & pilot protection, wire knob guards, (1) drawer, stainless steel front, sides,front top ledge, front grease trough, 4" back & tapered side splashes, 4" adjustable legs, 72,000 BTU, NSF, CSA 1 ea 1 year limited parts & labor warranty, standard 1 ea Gas type to be specified 1 ea 120v/50/60/1 ph, 2 amp, NEMA 5 15P 1 ea STAND/C 36 Equipment Stand, universal, 37" W x 24" H, 1/2" marine edge, undershelf, stainless steel, 5" casters, 4, EA; LI 016: FOOD PROCESSOR Univex Model No. UFP13 Food Processor, angled continuous feed design, 485 lb/hr production capacity, 300 rpm, stainless steel cutting surfaces, magnetic safety lock, aluminum alloy construction, 0.7 hp, 115v/60/1 ph, 4.29 Amps, NEMA 5 15P, cETLus, ETL Sanitation 1 ea slicer plates 1 Grater and shredder 1 dicer 1 - Julienne 1 ea One year, on site parts & labor warranty, see model "WARRANTY SHEET" for details ITEM, 10, EA; LI 017: RANGE, 60", 10 OPEN BURNERS Vulcan Model No. 60SS 10BN Endurance Restaurant Range, natural gas, 60", (10) 30,000 BTU burners with lift off burner heads, (2) standard oven bases, stainless steel front, sides, backriser & high shelf, fully MIG welded frame, 6"adjustable legs, 358,000 BTU, CSA, NSF 1 ea 1 year limited parts & labor warranty, standard 1 ea Stainless steel backriser and lift off high shelf, standard, 6, EA; LI 018: HD RANGE, 36", 4 OPEN BURNERS Vulcan Model No. V4B36S V Series Heavy Duty Range, gas, 36", (4) 35,000 BTU open burners, cast iron grates, standard oven, stainless steel front, front top ledge, sides,base, burner box & stub back, 190,000 BTU, 6" adjustable legs, CSA,NSF 1 ea 1 year limited parts & labor warranty, standard 1 ea Gas type to be specified 1 ea 1 1/4" rear gas connection, standard 1 ea Rear gas connection: cap and cover, both ends, 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions “ Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing ” basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf "AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures." "52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/950fb6c976d36eca081094e8250a290a)
- Place of Performance
- Address: Fort Hood, TX 76544
- Zip Code: 76544
- Zip Code: 76544
- Record
- SN04900247-W 20180427/180425230656-950fb6c976d36eca081094e8250a290a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |