MODIFICATION
Y -- Fuel Cell and Corrosion Control Facility
- Notice Date
- 5/31/2018
- Notice Type
- Modification/Amendment
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- Department of the Army, National Guard Bureau, 177 MSG/MSC, NJ ANG, 400 LANGLEY ROAD, EGG HARBOR TOWNSHIP, New Jersey, 08234-9500, United States
- ZIP Code
- 08234-9500
- Solicitation Number
- W912KN18R6000
- Point of Contact
- CW3 John W. Siimms, Phone: 609-562-0223, Johanna Paz, Phone: 6097616097
- E-Mail Address
-
john.w.simms3.mil@mail.mil, johanna.paz.civ@mail.mil
(john.w.simms3.mil@mail.mil, johanna.paz.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The 177FW located in 400 Langley Road, Egg Harbor Twp., NJ intends to issue an Request for Proposal to award a single firm fixed-price contract for services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, appliances and supervision necessary for the Construction of a Fuel Cell and Corrosion Control Facility. Construction services will consist of the construction of a 2-bay fuel cell and corrosion control facility utilizing conventional design and construction methods to accommodate the mission of the facility. The Work includes providing all labor, materials, equipment and incidentals necessary to construct a new, complete, and fully functional 21,100 square foot Fuel Cell and Corrosion Control Hangar in accordance with design plans and specifications. The new building envelope includes slab on grade construction, structural steel, metal wall panels, split face block exterior, SSMR and/or EPDM roofing, personnel doors, windows, and aircraft hangar doors. The Fuel Cell Maintenance Dock provides covered protected areas for fuel systems maintenance. Interior work includes administrative area fit out, proper heating, electrical, plumbing, compressed air systems, mechanical ventilation, fume sensing/alarm systems, fire suppression systems to include High Expansion Foam (HEF) systems, and wash-down drains. The Corrosion Control Hangar provides an environmentally controlled area to wash aircraft as well as hangar space for corrosion treatment and repair. Corrosion Control Shops are required for paint preparation, drying, abrasive blasting, mixing, and applying paint. Related administrative areas are required to support both fuel cell maintenance and corrosion control personnel. A separate environmentally-controlled building will be required to safely store the blast media, cleaning supplies, tools, and stripping materials. A small but separate storage location will be required to store hydrazine system maintenance materials, tools and equipment. Exterior work includes existing pavement demolition, site work, vehicle access pavements, aircraft pavements, underground utilities, fire protection utility and communications support. In addition to the base price for the Fuel Cell and Corrosion Control Facility, the project also includes the following Eight (8) Options: 0001: Urethane Floors 0002: Install Translucent Panels 0003: Exterior Windows/Storefront 0004: Standing Seam Metal Roof 0005: Install demountable partitions 0006: Construct A.G.E. parking lot, relocate existing A.G.E. canopy and construct new storm water management facilities 0007: Remove and Replace existing SW entry gate with new automated gate and keypad 0008: Asphalt Milling & Overlay In addition to the options listed above, a sole source justification will be provided for the fire monitoring system tie-in with N-Tech Systems. This project will meet a USGBC LEED Silver Certifiable level of construction. The contract duration is 545 days after NTP. This project is set aside 100% for Small Business. The North American Industry Classification (NAICS) Code is 236220, with a size standard of $36,500,000.00. The magnitude is between $5,000,000 and $10,000,000. Your attention is directed to FAR CLAUSE 52.219-14 (b) (4) LIMITATIONS ON SUBCONTRACTING which states "By submission of an offer and execution of a contract, the Offeror /Contractor agrees that in performance of the contract the concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees" applies to this project. The tentative date for issuing the solicitation is on-or about 08 Jun 2018. The tentative date for the pre-bid conference is on-or about 22 Jun 2018, 9:00 a.m. local time, location will be in the solicitation. Interested contractors are encouraged to attend and shall follow conference registration and base access requirements shown in the solicitation. A site visit will follow the pre-bid conference. All questions for the pre-bid conference must be submitted by 15 Jun 2018 via email to usaf.nj.177-fw.list.fal-msc-contracting@mail.mil. Proposals are tentatively due NLT noon EST on 10 Jul 2018, Noon, local time. Actual dates and times will be identified in the solicitation. Interested offerors must be registered in SAM. To register go to: https://www.sam.gov/portal/public/SAM/. You will need your DUNS number register. Instructions for registering are on the web page. The solicitation and associated information and the plans and specifications will be available only from the Federal Business Opportunities (FedBizOpps) website online at https://www.fbo.gov/. FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. (Please note the registration for access to the secure site takes approximately 15 business days. PLAN ACCORDINGLY) Reference paragraph 4.7 of the Vendor Guide for instructions to obtain a MPIN to retrieve the specification and drawing documents. Contractors who do not already have a MPIN are advised that the normal processing is 7 to 12 business days to obtain a MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See video in vendor guide at 3.3 on advanced functions for other information. Bidders/offerors who have registered with FedBizOpps must access the data for this solicitation with their MPIN. Bidders/offerors cannot log into the FedBizOpps home page and search for data. DISCLAIMER: The official plans and specifications are located on the official government webpage and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to https://www.fbo.gov/ for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible, due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the documents posted on the referenced web pages. The Government will not issue paper copies. All inquiries must be in writing, preferable via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web. Place of performance is Egg Harbor Twp., NJ.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA28-1/W912KN18R6000/listing.html)
- Place of Performance
- Address: 400 Langley Road, Egg Harbor Twp, New Jersey, 08234, United States
- Zip Code: 08234
- Zip Code: 08234
- Record
- SN04939985-W 20180602/180531231534-ae851ff1323b9ee0c9230937969871b1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |