SOLICITATION NOTICE
Z -- Replace Power House Windows, Oahe Dam
- Notice Date
- 6/7/2018
- Notice Type
- Presolicitation
- NAICS
- 238350
— Finish Carpentry Contractors
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Omaha, Attn: CENWO- CT, 1616 Capitol Ave, Omaha, Nebraska, 68102-4901, United States
- ZIP Code
- 68102-4901
- Solicitation Number
- W9128F18Q0074
- Point of Contact
- Jaimie K. Zurek, Phone: 4029952668
- E-Mail Address
-
jaimie.k.zurek@usace.army.mil
(jaimie.k.zurek@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Pre-Solicitation On or about 11 June 2018, the Government intends to issue a solicitation for "Replace Power House Windows, Oahe Dam". The solicitation will close on 29 June 2018. The solicitation will be restricted to small businesses. Site Visit: A Site Visit will be scheduled and additional information regarding the site visit will be provided in the solicitation via FAR Clause 52.236-27. Project Description: Contractor is to remove existing windows and furnish and install new windows at the Oahe Power Plant located approximately 7 miles North of Pierre, SD. All work shall conform to the specifications of this document. 1. General: There are ten existing windows on the second floor of the Power Plant in need of replacement. The original windows were replaced in 1988 with a 4 units mulled together within the rough opening of 12'8" by 5' 5 ¾" with new wood framing. The new windows shall have the same look of a 4 unit window. Five of the ten window systems will have openers and will project in, locations of those windows will be directed by the contracting officer's representative. New framing shall be Aluminum with concrete fasteners capable of providing a good seal and able to carry the weight of the new window systems. 2. Demolition: Contractor shall remove old windows, frames and hardware and dispose of properly. Windows shall be stripped of all wood framing down to the concrete rough opening. Only one window will be worked on at a time and windows must be secured by the end of business hours. Existing windows and building materials shall become the property of the contractor and shall be disposed of properly. 3. Installation: Contractor shall install newly furnished windows according to manufacturer's recommendations and instructions. New aluminum framing shall be fastened to the concrete rough opening using concrete fasteners. Care shall be taken to not damage interior or exterior walls of the power plant. Windows shall be properly trimmed on the interior of the power plant to appear finished. 4. Materials: Windows shall be similar or equal to the Desco 3250 thermal series windows with built in blinds. The five windows with project in openers shall have screens and will only be on two of the four window panes of the four pane unit and have a height of 14 inches with cam handles. Salient Features of the Desco 3250: 3250 Series Thermal 1. General: a. Frame Depth: 3-1/4 inches. b. Typical Material Thickness:.125 inch. c. Frame Construction: 1) Frame corners mitered, crimped and epoxy welded. Mullions mortise and tenon. 2) Corners weather sealed with sealant. 3) Units are re-glazable from the interior with re-useable snap in stops. d. Sash Construction: 1) Sash corners mitered, crimped and epoxy welded. 2) Corners weather sealed with sealant. 3) Dual weather strip with closed cell foam. 4) Units are re-glazable from the interior with re-useable snap in stops. e. Thermal Barrier: Poured-in-place two part polyurethane. f. Glazing Thickness: 1 inch to 2-3/4 inches g. Weatherstrip: Closed cell Santoprene foam encapsulated by a seamless Santoprene elastomeric skin. Project-In: a. Specs: 1) AAMA Designation: P-HC65; P-AW65 2) ASTM F 588 (Forced Entry) Grade 10 3) CRF Rating: 54. 4) Water Resistance: 15 PSF b. Size Limitations: 1) With cam handles - Minimum Size 14 inches wide by 17-3/4 inches high. Maximum Size 60 inches wide by 36 inches high. c. Flat Screens: Frame shall be constructed of 6063 T-5 alloy extruded aluminum. 1) Fiberglass 18x16 Mesh 2) Aluminum 18x16 Mesh d. Hardware: 1) Standard: Cam handles with concealed 4-bar stainless steel balanced arms. The estimated construction cost of this project is between $100,000 and $150,000. The Primary North American Industry Classification System (NAICS) code anticipated for solicitation is 238350, Finish Carpentry Contractors, with a size standard for Small Business of $15M. The Contractor will be required to commence work upon receipt of contract award and complete the work 180 calendar days after receipt of Notice to Proceed. Obtaining Solicitation Documents: Solicitation documents will be posted to the web via Federal Business Opportunities (www.fbo.gov). Find solicitation announcement in Fed Biz Opps (www.fbo.gov) 1.Use the ‘Quick Search' to locate the project (by entering the solicitation number) or use the advanced search features offered in the ‘Find Opportunities' (large arrow in the middle of the page) or use the ‘Opportunities' tab followed by the ‘Advanced Search' tab. 2.By using the ‘login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted. 3.Once you have located your project, click on link to solicitation to view the project. Files may be downloaded from the column on the right side reading ‘All Files' or from the ‘Packages' tab. 4.If you want other vendors, sub-contractors or contractors to contact you, click on the ‘Interested Vendors' tab and then ‘Add me to Interested Vendors' link at the bottom of the page. Contracting Office Address: USACE Omaha District 1616 Capital Ave, Omaha, NE 68102-4901 Point Of Contact: All questions regarding this announcement should be made to Jaimie Zurek who can be reached by email: jaimie.k.zurek@usace.army.mil Place of Performance: Oahe Dam Powerhouse: 28563 Powerhouse Road, Pierre, SD 57501-6174 Note: Offerors please be advised that an online registration requirement in System for Award Management (SAM) database http://www.sam.gov/ exists and directed solicitation provisions concerning electronic annual Representations and Certifications on SAM. Representations and certifications are required to be up-dated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year from date of submission or update to SAM. Solicitation documents will be posted to the web via Federal Business Opportunities (FedBizOpps) (www.fbo.gov). Registration is required to access solicitation documents. Federal Business Opportunities provides secure access to acquisition-related information, synopsis or pre-solicitation notices and amendments.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA45/W9128F18Q0074/listing.html)
- Place of Performance
- Address: 28563 Powerhouse Road, Pierre, South Dakota, 57501-6174, United States
- Zip Code: 57501-6174
- Zip Code: 57501-6174
- Record
- SN04948296-W 20180609/180607231138-890e4613da2c55f978c33cac8aeda023 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |