MODIFICATION
28 -- Steam generating system components
- Notice Date
- 6/7/2018
- Notice Type
- Modification/Amendment
- Contracting Office
- 7060 Tbilisi Place; Dept.of State, Washington, DC 20521
- ZIP Code
- 20521
- Solicitation Number
- PR7118793
- Response Due
- 4/26/2018
- Archive Date
- 10/23/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR7118793 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-97. The associated North American Industrial Classification System (NAICS) code for this procurement is 2005-97 with a small business size standard of 0.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-04-26 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Tbilisi, Georgia, null 0131 The U.S. Embassy Tbilisi, Georgia requires the following items, Brand Name or Equal, to the following: LI 001: Back pressure valve Nova-Tech International Injection Check/Back Pressure Valve Assembly For Pulsatron pumps with wet end codes: VTC1 3/8"" OD tubing connection fitting with coupling nut; 1/2"" NPT male connection for the injection point. Code:- J41996. Manufacturer:-Nova-T ech International,Inc, 13, EA; LI 002: Bleed valve assembly Nova-Tech International Bleed Valve Assembly For Pulsatron pumps with wet end codes: VTC1 3/8"" OD tubing connection fitting with coupling nut.Includes: TEFLON gasket Code:- L3300T01-PVC. Manufacturer:-Nova-T ech International,Inc.", 13, EA; LI 003: Foot Valve with strainer Nova-Tech International Foot Valve/Strainer Assembly For Pulsatron pumps with wet end codes: VTC1. 3/8"" OD tubing connection fitting with coupling nut.Includes: ceramic weight. Code:- J60716. Manufacturer:-Nova-T ech International,Inc, 13, EA; LI 004: PVC hose Nova-Tech International Pulsafeeder PVC Suction Tubing ; Clear, 3/8 inch OD Code:- 00007. Manufacturer:-Nova-T ech International,Inc, 80, Feet; LI 005: Pulsafeeder repair kit Nova-Tech International K2VTC1 Pulsafeeder KOPkit for PULSAtron pumps size 2 with VTC1 wet end code PTFE-faced CSPE-backed diaphragm, PVC suction and discharge valve cartridge assemblies with Tubing 3/8"" O.D. connection, 13, EA; LI 006: Pulsafeeder repair kit Nova-Tech International K8WTC8 Pulsafeeder KOPkit for PULSAtron pumps size 8 with WTC8 wet end code PTFE-faced CSPE-backed diaphragm, PVC suction and discharge valve cartridge assemblies with piping 1/2"" NPT(F) connection, 13, EA; LI 007: Repair kit TW Ward Grundfos Shaft Seal CR15-06. For Grundfos Pump Type : CR 15-06 KP-GJ-A-E-HQQE. Manufacturer: -T W Ward Industrial Boilers Limited, 4, EA; LI 008: Repair kit TW Ward Gasket kit CR15-06. For Grundfos Pump Type : CR 15-06 KP-GJ-A-E-HQQE. Manufacturer: -T W Ward Industrial Boilers Limited, 4, EA; LI 009: Repair kit for lower part of pump TW Ward Low end PSH stack kit CR15-06. For Grundfos Pump Type : CR 15-06 KP-GJ-A-E-HQQE. Manufacturer: -T W Ward Industrial Boilers Limited, 2, EA; LI 010: Safety valve for steam generator Cemline Safety valve.6030-JH-E01 2""X 2 1/2"" SS STEAM RV ET@25PSI; Part No: 02-311-385. Manufacturer: Cemline Corporation", 1, EA; LI 011: Steam generator maintenance kit Cemline Steam Generator maintenance gasket.16"" RING GASKET 150#GARLOCK 5500; Part No: 04-005-125. Manufacturer: Cemline Corporation, 2, EA; LI 012: Steam generator maintenance kit Cemline Steam Generator maintenance gasket. 16"" C-RIB GASKET 150#GARLOCK 5500; Part No: 04-005-315 Manufacturer: Cemline Corporation, 2, EA; LI 013: Steam generator maintenance kit Cemline Steam Generator maintenance kit. ALS-700 4 FLOAT LEVEL CONTROL; Part No: 02-111-204. Manufacturer: Cemline Corporation, 1, EA; LI 014: Steam generator maintenance kit Cemline Steam Generator maintenance kit 4 1/2"" 30"" X 100# 1/4"" BOTTOM CON; Part No: 02-302-008. Manufacturer: Cemline Corporation, 1, EA; LI 015: Steam generator maintenance kit Cemline Steam Generator maintenance kit.3/4"" F&T TRAP 125#HOFFMAN FT125H; Part No: 03-030-309. Manufacturer: Cemline Corporation, 1, EA; LI 016: Steam generator maintenance kit Cemline Steam Generator maintenance kit.2"" F&T TRAP 125#HOFFMAN FT125X; Part No: 03-030-331. Manufacturer: Cemline Corporation, 1, EA; LI 017: Steam generator maintenance kit Cemline Steam Generator maintenance kit. 3/4"" SS NEMA4 S211GF01L7EG5,24V; Part No: 02-315-033. Manufacturer: Cemline Corporation, 1, EA; LI 018: Steam generator maintenance kit Cemline Steam Generator maintenance kit. 1/2"" NC SS S211GF01L7DG4,24V; Part No: 02-315-024. Manufacturer: Cemline Corporation, 1, EA; LI 019: NA-60 non-asbestos Gasket Seal & Design NA-60 compressed non-asbestos Gasket 3/4"" for steam application, 200, EA; LI 020: NA-60 non-asbestos Gasket Seal & Design NA-60 compressed non-asbestos Gasket 1"" for steam application, 100, EA; LI 021: NA-60 non-asbestos Gasket Seal & Design NA-60 compressed non-asbestos Gasket 1.5"" for steam application, 60, EA; LI 022: NA-60 non-asbestos Gasket Seal & Design NA-60 compressed non-asbestos Gasket 2"" for steam application, 100, EA; LI 023: NA-60 non-asbestos Gasket Seal & Design NA-60 compressed non-asbestos Gasket 3"" for steam application, 100, EA; LI 024: NA-60 non-asbestos Gasket Seal & Design NA-60 compressed non-asbestos Gasket 3"" for steam application, 100, EA; LI 025: Repair kit for steam trap Spirax Sarco Main Valve Assy for Spirax Sarco steam trap DN50 FT11/20/46/47/44-4.5, 4, EA; LI 026: Repair kit for steam trap Spirax Sarco Ball Float for Spirax Sarco steam trap DN40-50 FT10/14/47/32/43/44/ 46 DN100 FT43/44, 8, EA; LI 027: Repair kit for steam trap Spirax Sarco Air Vent Assy 1-2 FT10 1/2 -1 FT16 Spirax Sarco steam trap DN15-50 FT41-47, 8, EA; LI 028: Repair kit for steam trap Spirax Sarco Gasket Set for Spirax Sarco steam trap2"" FT10/40 DN50 FT14/43/43V DN80-100 FT43, 4, EA; LI 029: Repair kit for steam trap Spirax Sarco Main Valve Assy for Spirax Sarco steam trap DN40 FT11/20/46/47/44-4.5, 4, EA; LI 030: Repair kit for steam trap Spirax Sarco Gasket Set for Spirax Sarco steam trap1- 1/2"" FT10/40 DN40 FT14/43/43V DN80-100 FT43, 4, EA; LI 031: Gasketing material Grainger Virgin PTFE Gasket Sheet, White.Grainger Item# 16T701;Mfr. Model# 8764V12125;Catalog Page# 3529, 12, EA; LI 032: Gasketing material Grainger Synthetic Fibers with Nitrile Binder Gasket Sheet, Green. Grainger Item# 38R340;Mfr. Model# C-4401;Catalog Page# 3529, 12, EA; LI 033: Cleaver Brooks GASKET,MOUNTING PLATE,SCANNER TUBE.Part No:032-00497-000. Assebmbly No:429-01338-000, 2, EA; LI 034: Gasket Cleaver Brooks GASKET,RELIEF DOOR, CB 250-350.Part No:032-00895-000.Assebmbly No:428-00037-000, 2, EA; LI 035: Gasket Cleaver Brooks GASKET,HEAD, CB/CBW 96""GARLOCK COD.Part No:032-00901-000.Assebmbly No:619-00005-000, 4, EA; LI 036: Gasket Cleaver Brooks GASKET,BLOWER, 96""LE"".Part No:032-02524-000.Assebmbly No:619-00001-000, 2, EA; LI 037: Gasket Cleaver Brooks GASKET,BURNER SUPPORT,BURNER DRAWER.Part No:032-02531-000.Assebmbly No:619-00005-000, 2, EA; LI 038: Gasket Cleaver Brooks GASKET,50 CYCLE AIR OIL TANK. Part No:032-02554-000.Assebmbly No:538-00130-000, 2, EA; LI 039: Gland Cleaver Brooks GLAND, PILOT, PACKING. Part No:034-00007-000.Assebmbly No:429-01338-000, 2, EA; LI 040: Gland bushing Cleaver Brooks VENTURI, GAS PILOT, CB 250 TO800800.Part No:048-00098-000.Assebmbly No:429-01338-000, 2, EA; LI 041: Burner spud Cleaver Brooks SPUD,GAS BURNER,.250""NPS SCH.40S X.Part No:057-01024-000.Assebmbly No:619-00005-000, 6, EA; LI 042: Burner spud Cleaver Brooks SPUD,GAS BURNER,.250""NPS SCH.40S X.Part No:057-01025-000.Assebmbly No:619-00005-000, 5, EA; LI 043: Relay Cleaver Brooks RELAY, D.P.D.T. 120V COIL.Part No:833-02261-000.Assebmbly No:619-00003-000, 7, EA; LI 044: Relay socket Cleaver Brooks SOCKET, RELAY MTNG ""KU"" TYPE 8. Part No:833-02263-000.Assebmbly No:619-00002-000, 7, EA; LI 045: Contactor Cleaver Brooks CONTACTOR,IEC,SQ D LC1D18F7,3-POLE, Part No:833-02667-000.Assebmbly No:619-00003-000, 1, EA; LI 046: Contactor Cleaver Brooks CONTACTOR,IEC,SQ D LC1D65F7,3-POLE, Part No:833-02671-000.Assebmbly No:619-00002-000, 1, EA; LI 047: Overload relay Cleaver Brooks OVERLOAD RELAY,IEC,SQ-D #LRD-16,9-1, Part No: 833-02680-000.Assebmbly No:619-00003-000, 1, EA; LI 048: Controller Cleaver Brooks BASE, CONTROLLER, Part No:833-02725-000.Assebmbly No:619-00002-000, 1, EA; LI 049: Controller Cleaver Brooks CONTROLLER, PROGRAM TIMING, Part No:833-02730-000.Assebmbly No:619-00002-000, 1, EA; LI 050: Pressure gauge Cleaver Brooks GAUGE, LOW PRESS., 2-1/2"", 0-, Part No:850-00109-000.Assebmbly No:619-00010-000, 2, EA; LI 051: Pressure gauge Cleaver Brooks GAUGE, LOW PRESS., 2-1/2"", 0-, Part No:850-00580-000.Assebmbly No:619-00010-000, 2, EA; LI 052: Glass pipe Cleaver Brooks GLASS,TUBULAR,10.5 00""""LG,CORNING PY, Prt No: 851-00034-000.Assebmbly No:619-00006-000, 30, EA; LI 053: Gasket Cleaver Brooks GASKET RING,2.500""""-300# ANSI STD,1,Part No: 853-00341-000.Assebmbly No:603-00218-000, 8, EA; LI 054: Gasket Cleaver Brooks GASKET RING,2.000""""-300# ANSI STD,1,Part No: 853-00347-000.Assebmbly No:507-08338-000, 12, EA; LI 055: Fiberglass rope Cleaver Brooks BULK ROPE,FIBERGLASS,.250""""DIA,HI-,Part No: 853-00348-000.Assebmbly No:619-00026-000, 12, EA; LI 056: Gasket Cleaver Brooks GASKET,FULL FACE SIZE 4"",Part No: 853-00403-000.Assebmbly No:619-00026-000, 12, EA; LI 057: Rubber gasket Cleaver Brooks GASKET,RUBBER,1/8" """THK, 3/8""""ID,Part No: 853-00436-000.Assebmbly No:619-00001-000, 60, EA; LI 058: Rubber gasket Cleaver Brooks GASKET,RUBBER,1/8""" "THK, 9/16""""ID,Part No: 853-00454-000.Assebmbly No:619-00001-000, 60, EA; LI 059: Gasket Cleaver Brooks GASKET (WASHER) 1/8""""X 3/4""""ID X2"""",Part No: 853-00574-000.Assebmbly No:428-00037-000, 4, EA; LI 060: Gasket Cleaver Brooks GASKET,HANDHOLE,3- 1/4 X 4-1/2 OBRO,Part No: 853-00935-000.Assebmbly No:270-02097-000, 12, EA; LI 061: Gasket Cleaver Brooks GASKET,MANHOLE,12" " X 16"", ELLIPTICA,Part No: 853-00939-000.Assebmbly No:270-02097-000, 2, EA; LI 062: Fiberglass rope Page: 15 of 23 Cleaver Brooks BULK ROPE,FIBERGLASS,1.50 0""""DIA,HI-,Part No: 853-01036-000.Assebmbly No:619-00005-000, 24, Feet; LI 063: Indicator Cleaver Brooks LIGHT ASSEMBLY,RED LENS,120V,SCRE,Part No: 881-00386-000.Assebmbly No:619-00002-000, 2, EA; LI 064: Indicator Cleaver Brooks LIGHT ASSEMBLY,WHITE LENS,120V,SCRE,Part No: 881-00387-000.Assebmbly No:619-00002-000, 4, EA; LI 065: Fuse Cleaver Brooks VALVE,RELIEF,1/2"" ""PRESET FOR 80PSIA,Part No: 940-06599-000.Assebmbly No:619-00016-000, 1, EA; LI 066: Gasket Cleaver Brooks Page: 16 of 23 GASKET FULL FACE,Part No: 853-00816., 8, EA; LI 067: Gasket Cleaver Brooks GASKET RING SEPCO,Part No: 853-00976, 1, EA; LI 068: Gasket Cleaver Brooks GASKET RING SEPCO (Sepco sheet or eq 0.0632 thick X 29.0002 id X 30.500 o/d,Part No: 853-01003., 2, EA; LI 069: Screw Cleaver Brooks CAP SCREW (BOLT for fron door),Part No: 868-00819, 20, EA; LI 070: Screw Cleaver Brooks CAP SCREW (BOLT for rear door),Part No: 868-00594, 20, EA; LI 071: Nut Cleaver Brooks NUT (for fron and rear doors),Part No: 051-00162, 30, EA; LI 072: FIRE SIDE GASKET KIT Cleaver Brooks FIRE SIDE GASKET KIT,Part No: 880-00656, 2, EA; LI 073: FIRE SIDE GASKET KIT Cleaver Brooks FIRE SIDE GASKET KIT,Part No: 999303/AF, 2, EA; LI 074: Spring Cleaver Brooks SPRING,BURNER DRAWER,Part No: 082-00007-000. Assembly No: 251-00183-000, 2, EA; LI 075: Orifice assembly Cleaver Brooks ORRIFICE ASS'Y, LIGHT OIL,Part No: 277-00121-000. Assembly No: 619-00016-000, 2, EA; LI 076: Fuse Cleaver Brooks FUSE,CARTRIDGE,80. 00 AMP,600V,B,Part No: 832-00502-000. Assembly No: 619-00026-000, 3, EA; LI 077: Fuse Cleaver Brooks FUSE,CARTRIDGE,2.8 0 AMP,600V,B,Part No: 832-01806-000. Assembly No: 619-00003-000, 2, EA; LI 078: Fuse Cleaver Brooks FUSE,CARTRIDGE,17.5 AMP,600V,B,Part No: 832-01840-000. Assembly No: 619-00003-000, 2, EA; LI 079: Fuse Cleaver Brooks FUSE,CARTRIDGE,60. 00 AMP,600V,B,Part No: 832-01848-000. Assembly No: 619-00003-000, 3, EA; LI 080: Fuse Cleaver Brooks FUSE,CARTRIDGE,5.6 0 AMP,600V,B,Part No: 832-01917-000. Assembly No: 619-00003-000, 1, EA; LI 081: Solenoid valve Cleaver Brooks VALVE,SOLENOID,GAS VENT,N.O.3/4'',Part No: 948-00002-000. Assembly No: 619-00010-000, 2, EA; LI 082: Solenoid valve Cleaver Brooks VALVE,SOLENOID,GAS VENT,NC 1/2''NPT 3/4'' ORF',Part No: 948-00197-000. Assembly No: 619-00010-000, 2, EA; LI 083: Gasket Cleaver Brooks Gasket for ALWCO,Part No: 853-00268., 8, EA; LI 084: Repair Kit for Blow Down Valve Cleaver Brooks Repair Kit for Blow Down Valve,Part No: 945-00317, 4, EA; LI 085: Rubber gasket Cleaver Brooks Gasket for water level gauge glass,Part No: 853-00-115-000, 60, EA; LI 086: Safety valve Cleaver Brooks VALVE SAFETY,KUNKLE #6252KH,SET@100,Part No: 940-07367-000. Assembly No: 619-00011-000, 4, EA; LI 087: Cleaver Brooks Control, Pessure, L91,Part No: 817-00234-0000., 2, EA; LI 088: Metal brush for cleaning of inner surface of pipes TW Ward 2 "" DIA S.SPIRAL TUBE BRUSH for boiler cleaning Item No: 69-005-SS. Manufacturer: T.W. WARD Industrial Boilers Ltd, 12, EA; LI 089: Metal brush for cleaning of inner surface of pipes TW Ward 2.14 "" DIA S.SPIRAL TUBE BRUSH for boiler cleaning Item No: 69-006-SS. Manufacturer: T.W. WARD Industrial Boilers Ltd, 12, EA; LI 090: Lubricant AmSoil Synthetic Compressor Oil - ISO 46, SAE 20, 20, Liters; LI 091: Shipping address: 1. Tbilisi, Republic of Georgia; DIPLOMATIC CARGO AMERICAN EMBASSY TBILISI 11 GEORGE BALANCHINE STREET, TBILISI 0131, GEORGIA, 1, EA; LI 092: Shipping address: 2. Landstar Express America; C/O A&F Service; 333 First Street; Elizabeth, NJ 07206; Attn: US DESPATCH; Tel: 800-272-8732/908-862-0043, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Embassy Tbilisi, Georgia intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Embassy Tbilisi, Georgia is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a Brand Name Only procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. All bid prices must include shipping FOB Destination CONUS (CONtinental U.S.). No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acquisition.gov/far/ (a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the Federal Desktop Core Configuration (FDCC). This includes Internet Explorer 7 configured to operate on Windows XP and Vista (in Protected Mode on Vista). For the Windows XP settings, see http://csrc.nist.gov/itsec/guidance_WinXP.html and for the Windows Vista settings, see: http://csrc.nist.gov/itsec/guidance_vista.html. (b) The standard installation, operation, maintenance, update, and/or patching of software shall not alter the configuration settings from the approved FDCC configuration. The information technology should also use the Windows Installer Service for installation to the default program files directory and should be able to silently install and uninstall. (c) Applications designed for normal end users shall run in the standard user context without elevated system administration privileges. (d) The Department of State currently intends to use Vista in Protected Mode in the future when all devices at all worldwide locations have sufficient capacity to permit an upgrade from the XP operating system. Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that will supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA. An article is considered a product of a country only if it is wholly a product of that country or if it has been substantially transformed in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered substantially transformed based solely on its integration into IT or other systems. The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/35bf91c110994174619fc47c854ffea2)
- Place of Performance
- Address: Tbilisi, Georgia, null 0131
- Zip Code: 0131
- Zip Code: 0131
- Record
- SN04948770-W 20180609/180607231326-35bf91c110994174619fc47c854ffea2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |