FBODaily.com | FedBizOpps: PRESOL | 29 | FILTERS

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 13, 2018 FBO #6046
SOLICITATION NOTICE

29 -- FILTERS

Notice Date: 6/11/2018
Notice Type: Presolicitation
NAICS: 333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, 5450 Carlisle Pike, Mechanicsburg, Pennsylvania, 17055, United States
ZIP Code: 17055
Solicitation Number: SPE7MX-18-R-0071
Archive Date: 7/11/2018
Point of Contact: Pamela R. Baker, Phone: 6146926629
E-Mail Address: Pamela.Baker@dla.mil
(Pamela.Baker@dla.mil)
Small Business Set-Aside: N/A
Description: Federal Business Opportunities Synopsis (FedBizOpps) Information Form The subject requirement is for the acquisition of 6 NSN(s) listed below. An Indefinite Quantity Long-Term solicitation will be for a three-year base period with and two one-year option periods which will be extended in one year increments, at the discretion of the Government. The total duration not exceed five years. NAIC(s) 333999, 336390, 336411, 336413, 336412 applicable with Small Business Size Standards 500, 1,000, 1,500, 1,250. Solicitation will be Unrestricted with other than full and open competition. The solicitation will be available on or about June 27, 2018 at https://www.dibbs.bsm.dla.mil/rfp/. Hard copies are not available. Increments and delivery schedule will be noted in the RFP. FOB Origin is required. Inspection/Acceptance requirements will be at origin for CLINs 0002 and 0004 and destination rest. All responsible sources may submit an offer/quote, which shall be considered. It is the responsibility of the offeror to obtain the additional data that is necessary to manufacture the item and provide this evidence to the Government. Drawings/specifications will be available through the DIBBS link in the synopsis on the solicitation issue date. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, surge, socioeconomic support and other evaluation factors as described in the solicitation. Based upon market research, the Government is using the policies contained in Part 15, Contracting by Negotiation in its solicitation for the described supply or service. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement within 15 days of this notice. CLIN NIIN CAGE PART NUMBER CAGE NAME UM ADQ 0001 4330-00-191-2951 60047 AC2634E129X2 PALL AEROPOWER CORP SUB OF PALL EA 29 90005 1744580 PUROLATOR FACET, INC. 0002 2910-00-467-2580 19207 11668617 EA 109 90005 054615-08 PUROLATOR FACET, INC. 0003 1615-01-113-0220 77272 145DS023-4 THE BOEING COMPANY DBA BOEING EA 278 90005 1736962-01 PUROLATOR FACET, INC. 0004 1650-01-173-5506 76823 2-43920 NORTHROP GRUMMAN SYSTEMS EA 1,411 05228 6656172 PTI TECHNOLOGIES INC. 0JRC1 2-43920-3 NORTHROP GRUMMAN TECHNICAL 90005 033258-01 PUROLATOR FACET, INC. 0005 2910-01-224-7438 45934 2497757 ONTIC ENGINEERING AND EA 1,423 18350 AC-9958F-810Y1 PALL AEROPOWER CORPORATION 90005 1742351 PUROLATOR FACET, INC. 99551 2497757 GOODRICH CORPORATION DBA 0006 2915-01-256-6347 97499 406-360-601-103 BELL HELICOPTER TEXTRON INC. DBA EA 255 18350 AA-B706F-3K1T PALL AEROPOWER CORPORATION 90005 1742510-01 PUROLATOR FACET, INC. *** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:001912951 FILTER ELEMENT, FLUID. REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:ZD025 REFERENCE NUMBER:CA061 CRITICAL APPLICATION ITEM PUROLATOR FACET, INC. 90005 P/N 1744580 PALL AEROPOWER CORP SUB OF PALL 60047 P/N AC2634E129X2 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. NSN:004672580 FILTER, FUEL. REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ006 REFERENCE NUMBER:RQ009 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RT001 REFERENCE NUMBER:ZD064 REFERENCE NUMBER:ZD080 ON SHEET 2 OF DRAWING 11668617, THE ANGLE OF THE DRAIN VALVE PORT IS 27/22 DEGREES. REFERENCE NUMBER:CS120 REFERENCE NUMBER:CS187 REFERENCE NUMBER:RQ027 CRITICAL APPLICATION ITEM PUROLATOR FACET, INC. 90005 P/N 054615-08 IAW BASIC DRAWING NR 19207 11668617 REVISION NR N DTD 05/15/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11641857 REVISION NR F DTD 08/01/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11668617 REVISION NR DTD 11/14/2013 PART PIECE NUMBER: IAW REFERENCE QAP 19207 11668617 REVISION NR E DTD 08/30/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12254231 REVISION NR A DTD 08/30/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5702776 REVISION NR A DTD 08/26/1969 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5704487 REVISION NR A DTD 06/15/1978 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705134 REVISION NR B DTD 05/11/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11641744 REVISION NR C DTD 08/01/2015 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D4 OPI:O INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 NSN:011130220 "SOURCE CONTROL ITEM" REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:ZD080 REFERENCE NUMBER:A0003 SCREEN ASSEMBLY, TRANSMISSION IAW BOEING HELICOPTERS, CAGE 77272 DWG 145DS023 REV "E" DTD 29JUL1985. P/N 145DS023-4 APPROVED SOURCE: FACET ENTERPRISE INC, CAGE 90005 P/N 1736962-01 REFERENCE NUMBER:CS001 REFERENCE NUMBER:A0056 CRITICAL APPLICATION ITEM PUROLATOR FACET, INC. 90005 P/N 1736962-01 IAW BASIC DRAWING NR 77272 145DS023 REVISION NR E DTD 07/29/1985 PART PIECE NUMBER: 145DS023-4 PREP FOR DELIVERY LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. NSN:011735506 FILTER ELEMENT, FLUID REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ009 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:ZD080 REFERENCE NUMBER:A0003 REFERENCE NUMBER:CS001 CONFIGURAATION CONTROL ITEM: NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE 76823 DRAWING 2-43920 LATEST REVISION P/N 2-43920 APPROVED SOURCES: NORTHROP GRUMMAN TECHNICAL SERVICES CAGE 0JRC1 PTI TECHNOLOGIES INC. CAGE 05228 PUROLATOR FACET, INC. CAGE 90005 HIGHER LEVEL CONTRACT QUALITY: IDENTIFY TO: SAMPLING PLAN: CRITICAL APPLICATION ITEM Northrop Grumman Technical 0JRC1 P/N 2-43920-3 PUROLATOR FACET, INC. 90005 P/N 033258-01 PTI Technologies Inc. 05228 P/N 6656172 IAW REFERENCE DRAWING NR 76823 2-43920 REVISION NR DTD 06/17/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 76823 2-43920 REVISION NR G DTD 12/05/1978 PART PIECE NUMBER: 2-43920-3 PREP FOR DELIVERY LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. NSN:012247438 ELEMENT ASSEMBLY OIL REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 CRITICAL APPLICATION ITEM PUROLATOR FACET, INC. 90005 P/N 1742351 PALL AEROPOWER CORPORATION 18350 P/N AC-9958F-810Y1 GOODRICH CORPORATION DBA 99551 P/N 2497757 ONTIC ENGINEERING AND 45934 P/N 2497757 PREP FOR DELIVERY LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. NSN:012566347 FILTER ELEMENT REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ011 BELL HELICOPTER TEXTRON INC. CAGE 97499 P/N 406-360-601-103 PALL AEROPOWER CORPORATION. REFERENCE NUMBER:A0003 REFERENCE NUMBER:CS001 PUROLATOR FACET INC. REFERENCE NUMBER:01650 REFERENCE NUMBER:AE003 IDENTIFY TO CRITICAL APPLICATION ITEM PUROLATOR FACET, INC. 90005 P/N 1742510-01 PALL AEROPOWER CORPORATION 18350 P/N AA-B706F-3K1T IAW BASIC DRAWING NR 97499 406-360-601 REVISION NR C DTD 01/10/1990 PART PIECE NUMBER: 406-360-601-103 IAW REFERENCE DRAWING NR 97499 406-360-601 REVISION NR B DTD 02/16/1990 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. ******************************************************************************************************** GLOSSARY ******************************************************************************************************** PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951. •In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack. •The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951. ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER ZD025 MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). REFERENCE NUMBER CA061 ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER RQ001 RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) REFERENCE NUMBER RQ002 RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) REFERENCE NUMBER RQ006 RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS REFERENCE NUMBER RQ009 RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN REFERENCE NUMBER RT001 RT001: MEASURING AND TEST EQUIPMENT REFERENCE NUMBER ZD064 The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. REFERENCE NUMBER ZD080 SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. REFERENCE NUMBER CS120 NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REFERENCE NUMBER RQ027 A. Data required by this document will be included in the price of the procured item(s). B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP). C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT. D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT - Web Based Training Main Menu under "Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer of the material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract. Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years. When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained. E. No Certificate of Conformance (COC) or alternate release is authorized. End of Requirement REFERENCE NUMBER A0003 MIL-STD-130N (1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY REFERENCE NUMBER CS001 THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25. REFERENCE NUMBER A0056 THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR CITED P/N WILL BE IN CONFORMANCE WITH THE LISTED DRAWING. REFERENCE NUMBER CS284 EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER CAGE CODE, AND PART NUMBER. REFERENCE NUMBER 01650 CONFIGURATION CONTROL APPLIES FURNISHED ITEM MUST CONFORM TO THE CITED REQUIREMENTS/REVISION. VARIATIONS MUST BE IDENTIFIED AND APPROVAL OBTAINED IN ACCORDANCE WITH MIL-STD-973 DATED 17 APR 92 AND INTERIM NOTICE 3 DATED 13 JAN 95. PARAGRAPH 5.4.2 REQUIREMENTS FOR ENGINEERING CHANGE PROPOSALS AND APPENDIX D INSTRUCTIONS FOR THE PREPARATION OF AN ECP UTILIZING DD FORMS 1692 THRU 1692-7. PARAGARAPH 5.4.3 REQUIREMENTS FOR REQUESTS FOR DEVIATION (RFD), 5.4.4 REQUIREMENTS FOR REQUESTS FOR WAIVER (RFW) AND APPENDIX E INSTRUCTIONS FOR THE PREPARATION OF REQUESTS FOR DEVIATION/WAIVER UTILIZING DD FORM 1694. PARAGRAPH 5.4.6 REQUIREMENTS FOR SPECIFICATION CHANGE NOTICES (SCNS), 5.4.7 REQUIREMENTS FOR NOTICES OF REVISION (NORS), APPENDIX F INSTRUCTIONS FOR PREPARATION OF SPECIFICATION CHANGE NOTICE UTILIZING DD FORM 1696 AND APPENDIX G INSTRUCTIONS FOR PREPARATION OF NOTICE OF REVISION UTILIZING DD FROM 1695. PARAGRAPH 5.4.8 CONFIGURATION CONTROL (SHORT FORM PROCEDURE.) ITEM SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-130N DATED 17 DEC 2007. OFFERORS NOT CITED AS APPROVED SOURCES IN THE PROCUREMENT ITEM DESCRIPTION ARE REQUIRED TO OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF THE SOURCE APPROVAL AUTHORIZATION OR CERTIFICATION OF PRIOR APPROVAL MUST ALSO BE SUBMITTED TO DSCR WITH THE OFFER. REFERENCE NUMBER AE003 DSCR DOES NOT CURRENTLY HAVE AN APPROVED TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN. DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7MX-18-R-0071/listing.html)
Record: SN04950546-W 20180613/180611230741-8cac812f5e256ef8a75e1f1619293347 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

29 -- FILTERS