FBODaily.com | FedBizOpps: PRESOL | J | Service maintenance for Stryker Camera heads & Couplers

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 17, 2018 FBO #6050
SOLICITATION NOTICE

J -- Service maintenance for Stryker Camera heads & Couplers

Notice Date: 6/15/2018
Notice Type: Combined Synopsis/Solicitation
NAICS: 811219 — Other Electronic and Precision Equipment Repair and Maintenance
Contracting Office: Department of the Navy, Bureau of Medicine and Surgery, Naval Medical Center San Diego, Bldg 1, 34800 Bob Wilson Drive, San Diego, California, 92134-5000, United States
ZIP Code: 92134-5000
Solicitation Number: N0025918Q0065
Archive Date: 7/31/2018
Point of Contact: Reynaldo R. DeVera, Phone: 6195325564
E-Mail Address: reynaldo.r.devera.civ@mail.mil
(reynaldo.r.devera.civ@mail.mil)
Small Business Set-Aside: Service-Disabled Veteran-Owned Small Business
Description: NOTICE TO CONTRACTOR This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is N0025918Q0065. It is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-99. The North American Industry Classification System (NAICS) Code for this acquisition is 811219. The size standard is 20.5 (millions of dollars). This requirement is solicited as SDVOSB set-aside. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. 52.212-2 -- Evaluation -- Commercial Items (Oct 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers in descending order of importance: 1.) Technical Capability - defined as an assessment of the prospective contractor's key management personnel to determine if they have the basic knowledge, experience, and understanding of the requirements necessary to provide the requested services in the statement of work (SOW). 2.) Past Performance - provide two (2) references with the Point of Contact, telephone number, e-mail address, mailing address, contract number and addressing that you have provided the same or similar services in the last three (3) years. Include evidence of previous experience with Department of Defense (DoD), if applicable. 3.) Price - The Government shall conduct a price evaluation of all technically acceptable offers with satisfactory past performance. Technical capability and past performance, when combined, are more important than price. Contractors who do not meet the first two factors will not undergo a price evaluation. Naval Medical Center San Diego (NMCSD) requires contractors must meet or exceed the minimum requirements stated in the CLIN description in conjunction with the Performance Work Statement. The requirement is for one (1) year. Contractors shall provide statements in Word and or PDF format justifying the evaluation factors above and quotes will be based on the following CLINs Items required: CLIN 0001: Base Year: Service maintenance for the listed Stryker Camera Heads & Couplers to be provided in accordance with the Statement of Work. Period of Performance (POP): 16 July 2018 - 15 July 2019. Quarter Time Unit Price: ____________ Total CLIN Price: ____________ CLIN 1001: Option Year 1: Service maintenance for the listed Stryker Camera Heads & Couplers to be provided in accordance with the Statement of Work. Period of Performance (POP): 16 July 2019 - 15 July 2020 Quarter Time Unit Price: ____________ Total CLIN Price: ____________ Delivery/Acceptance location: The service maintenance shall be performed at NMCSD Located at 34800 Bob Wilson Drive, San Diego, CA 92134-5000. FBO Destination: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. DEFENSE BIOMETRIC IDENTIFICATION SYSTEM (DBIDS) (a) In accordance with CNICMEMO dated May 5, 2017, individuals currently using an NCACS credential for Installation access are required to switch to a DBIDS no later than 14 August 2017. After 14 August 2017, the NCACS credential will no longer be valid for access to Navy Installations. (b) NCACS users may visit the local Navy Installation Visitor Control Center to obtain a DBIDS credential. To ensure uninterrupted Installation access, current NCACS credential holders are encouraged to shift to the DBIDS credential as soon as possible as Navy does not have the ability to extend this deadline. There are no fees incurred by the contractor, vendor, or supplier to obtain a DBIDS credential. (c) Individuals who apply for NCACS credentials during the period of 17 April through 31 May 2017 must also obtain DBIDS credentials. NCACS credentials issued after 17 April 2017 will no longer be accepted without an accompanying DBIDS credential for Navy Installation access. (d) DBIDS guidance for Vendors/Contractors to obtain a pass is accessible through the following website: https://www.cnic.navy.mil/om/dbids.html For more information or to enroll in the DBIDS Program call: 1.202.433.4784. For Naval Base San Diego Pass and Decal Office, call: 1.619.556.1653 For Marine Corp Air Command Combat Center 29 Palms, Security Pass and Decal Office, call: 1.760.830.7700 For Naval Air Station Lemoore, Security Pass and Decal, call: 1-559- 998-4786 (c) Vendors, contractors, suppliers and other service providers shall present their pass upon entry at ECP. This acquisition incorporates by reference the following FAR provisions and clauses: 52.212-3 -- Offeror Representations and Certifications -- Commercial Items (Jan 2017) Contractors are reminded to either include a completed copy of 52.212-3 and its ALT I with quotes, or alternatively, the provision can also be submitted at https://www.sam.gov. 52.212-4 - Contract Terms and Conditions -- Commercial Items (JAN 2017) 52.217-5 - Evaluation of Options (JUL 1990) 52.232-40 - Providing Accelerated Payments to Small Business Subcontractors (DEC 2013) Additional contract terms and conditions applicable to this procurement are: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.203-7005 Representation Relating to Compensation of Former DoD Officials (NOV 2011) 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting (OCT 2016) 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (MAY 2016) 252.223-7008 Prohibition of Hexavalent Chromium (JUN 2013) 252.225-7000 Buy American--Balance of Payments Program Certificate-Basic (NOV 2014) 252.225-7001 Buy American and Balance of Payments Program (DEC 2016) 252.225-7035 Buy American--Free Trade Agreements--Balance of Payments Program Certificate-Basic (NOV 2014) 252.225-7036 Buy American-Free Trade Agreements--Balance of Payments Program-Basic (DEC 2016) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (JUN 2012) 252.232-7006 Wide Area WorkFlow Payment Instructions (MAY 2013) 252.232-7010 Levies on Contract Payments (DEC 2006) 252.244-7000 Subcontracts for Commercial Items (JUN 2013) 252.246-7003 Notification of Potential Safety Issues (JUN 2013) 252.246-7008 Sources of Electronic Parts (OCT 2016) 252.247-7023 Transportation of Supplies by Sea-Basic (APR 2014) 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) The following clauses incorporated by full text apply to the solicitation: The provision at FAR 52.212-1 applies to this acquisition. Addendum to FAR 52.212-1: FAR 52.212-1 is replaced in its entirety by this addendum: Instructions to Quoters-Commercial Items (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in the first paragraph of this combined synopsis/solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. ( b ) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations must be submitted as specified in the solicitation. As a minimum, quotations must show- (1) The solicitation number; (2) The time specified in the solicitation for receipt of quotations; (3) The name, address, and telephone number of the quoter; (4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3( b ) for those representations and certifications that the quoter shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) Quotation must include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. ( c ) Reserved. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during testing. (e) Multiple quotations. Quoters are encouraged to submit multiple quotations presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately. (f) Late submissions. (1) Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotations are due. (2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and will not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition. (3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotations by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotations will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (g) Issuance of purchase order. Quotations should contain the quoter's best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may issue a purchase order to other than the quoter with the lowest priced quotation. After the evaluation of quotations, the Contracting Officer may negotiate final terms with one or more quoters of the Government's choice before issuing any purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government's choice and will not use the formal source selection procedures described in FAR part 15. (h) Multiple purchase orders. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation. (i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L'Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i) ASSIST (https://assist.dla.mil/online/start/). (ii) Quick Search (http://quicksearch.dla.mil/). (iii) ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- (i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm); (ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding $3,000, and quotations of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The quoter shall enter, in the block with its name and address on the cover page of its quotation, the annotation "DUNS" or "DUNS+4" followed by the DUNS or DUNS+4 number that identifies the quoter's name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the quoter to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the quoter does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. A quoter within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. A quoter located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The quoter should indicate that it is a quoter for a Government contract when contacting the local Dun and Bradstreet office. (k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of a quotation, the quoter acknowledges the requirement that a prospective contractor shall be registered in the SAM database prior to purchase order issuance, during performance and through final payment of any contract resulting from this solicitation. If the quoter does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to issue the purchase order to the next otherwise successful registered quoter. Quoters may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov. (l) Requests for information. The contracting officer will not notify unsuccessful quoters that responded to this solicitation. Quoters may request information on purchase order(s) resulting from this solicitation from the contracting officer. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). ____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). ___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). _X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). ____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313). ____ (10) [Reserved] ____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a). ____ (ii) Alternate I (NOV 2011) of 52.219-3. ____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). ____ (ii) Alternate I (JAN 2011) of 52.219-4. ____ (13) [Reserved] _ __ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). ____ (ii) Alternate I (NOV 2011). ____ (iii) Alternate II (NOV 2011). ____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. ____ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)). ____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)). ____ (ii) Alternate I (Nov 2016) of 52.219-9. ____ (iii) Alternate II (Nov 2016) of 52.219-9. ____ (iv) Alternate III (Nov 2016) of 52.219-9. ____ (v) Alternate IV (Nov 2016) of 52.219-9. ____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)). ____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)). ____ (20) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). _X__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f). __X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)). ____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)). ____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)). __X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). __X__(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126). __X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). __X__ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). ____ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). __X__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793). ____ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212). ____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __X__ (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). ____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). ____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction. ____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016). ____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693). ____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693). ____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (OCT 2015) of 52.223-13. ____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-14. ____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). ____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun 2014) of 52.223-16. __X__ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693). ____ (46) 52.223-21, Foams (June, 2016) (E.O. 13693). ____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). ____ (ii) Alternate I (JAN 2017) of 52.224-3. ____ (48) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83). ____(49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. ____ (ii) Alternate I (May 2014) of 52.225-3. ____ (iii) Alternate II (May 2014) of 52.225-3. ____ (iv) Alternate III (May 2014) of 52.225-3. ____ (50) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __X__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). ____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150 ____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). ____ (56) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). __X__ (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332). ____ (58) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (July 2013) (31 U.S.C. 3332). ____ (59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332). ____ (60) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ____ (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)). ____ (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). _____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67). _____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67). _____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67). _____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658). _____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). _____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792). _____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13,Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246). (vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212). (x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67). (xii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627). _____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). _X__ (xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.) (xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989). (xvi)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658). (xvii) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017). Note to paragraph (e)(1)(xvii): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction. (xviii) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)). (xix) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). (B) Alternate I (JAN 2017) of 52.224-3. (xx) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706). (xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.217-9 Option to Extend the Term of the Contract (Mar 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years. (End of Clause) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): http://farsite.hill.af.mil/vmfara.htm https://www.acquisition.gov/browsefar (End of provision) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): FAR Clauses: http://farsite.hill.af.mil/vmfara.htm DFAR Clauses: http://farsite.hill.af.mil/vmdfara.htm (End of clause) The Government will only consider firm fixed price (FFP) quotations. All questions regarding the RFQ, of a contractual or technical nature, must be submitted electronically by email to reynaldo.r.devera.civ@mail.mil no later than June 20, 2018 at 4:00 pm Pacific Standard Time (PST). Questions with the Government's responses will be posted as an attachment to the RFQ. Please be advised that the Government reserves the right to transmit those questions and answers of a common interest to all prospective Offerors. Electronic submission of Quotes: Quotations shall be submitted electronically by email to Reynaldo.r.devera.civ@mail.mil. Quotations must be received by 4:00 pm (PST) on June 29, 2018. Email submissions are limited to 2MB. The submitter should confirm receipt of email submissions. All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Each response must clearly indicate the capability of the Offeror to meet all specifications and requirements. ******* End of Combined Synopsis/Solicitation ******** Statement of Work Stryker Brand Camera Heads and Couplers 1. Scope: The contractor shall provide all services, labor, parts, materials, and equipment necessary for the service and maintenance for the government-owned Stryker Camera Heads and Couplers as listed on Appendix A, at Naval Medical Center San Diego (NMCSD). Contractor shall service and maintain the equipment within the original equipment manufacturer's (OEM) specifications, in accordance with the US, State, and Local laws and regulations, US Navy regulations, and Joint Commission requirements. 2. Definitions: As used throughout this work statement, the following terms shall have the meaning set forth below: 2.1. Service and maintenance: (a) any modification, adjustment, or replacement of the equipment that corrects a malfunction and effectively brings the equipment into material conformity with the technical specification for that equipment as designated by the original equipment manufacturer (OEM), (b) a procedure or routine that, when observed in the regular, proper operation of the equipment, avoids the material adverse effect of the applicable nonconformity, (c) any measures performed that assure the continued operation of the equipment or returns the equipment to its designed efficiency and capacity, (d) replacement of a piece of equipment on a one-for-one basis in order to provide a substitute of equal or greater value in lieu of a damaged or defective device for compensation, return, or refund of equipment. 2.2. Contracting Officer (KO): A warranted representative of the federal government who has the express authority to enter into, administer, and/or terminate contracts and make related determinations and findings. The KO is the only person authorized to approve changes to any terms, conditions, or requirements of the contract. 2.3. Technical Representative (TR): A Government employee appointed by the KO and responsible for the inspection, evaluation, and acceptance of products and services provided in accordance with the terms and conditions of the contract. 3. Location: Places of performance shall be: Main Operating Room Building One, Fourth Floor Naval Medical Center San Diego 34800 Bob Wilson Drive San Diego, CA 92134-5000 and/or Biomedical Repair Department Building One, Ground Floor Naval Medical Center San Diego 34800 Bob Wilson Drive San Diego, CA 92134-5000 4. Requirements: 4.1. General Performance Requirements: 4.1.1. The Contractor shall provide equipment maintenance services to include all periodic planned maintenance and unscheduled repairs in accordance with OEM specifications and in compliance with ISO 9001 standards, to include repairs necessitated by operator error. 4.1.2. The Contractor may use third party service vendors not limited to the Original Equipment Manufacturer (OEM), however, these vendors must be approved in advance by the KO and TR. The Contractor must submit a list of any sub-contractors they intend to use as third party service vendors to the KO and TR for approval. Third party service vendors shall not perform any work under this contract prior to such approval. 4.1.3. Ensure that only fully-qualified field engineers and/or technicians who have gone through OEM or equivalent third-party service schools for the equipment shall be employed in the performance of any and all work performed under this contract. Service personnel shall have sufficient experience to demonstrate proficiency in maintenance of the product. Upon request, Contractor shall provide written assurance of the competency their personnel as well as a list of credentials for approved field service personnel. The KO and/or TR may authenticate the training requirements and request training certificates or credentials from the service vendors at any time. 4.1.4. Test equipment: Test equipment calibration shall be traceable to National Institutes of Standards and Technology (NIST traceable). Any efforts conducted without equipment within the calibration intervals is not performance in accordance with this contract. Upon request by TR, the Contractor and/or service vendors shall provide a copy of the current calibration certification of all test equipment to be used, or which has been used, on NMCSD equipment. 4.1.5. Field Service Reports: Contractor shall furnish a written or electronic vendor supplied Field Service Report (FSR) to the Duty Staff at NMCSD Biomed. All FSR's shall be submitted within 72 hours of completion of service and shall be sent to the following email address: usn.nmcsd-contractadministrator@mail.mil The contractor or their representative shall complete the FSR to include, at a minimum, the following information: 1. Contractor Name 2. Technician's printed name, telephone number, and signature 3. Date and Time of Arrival 4. ECN (to be provided by Navy) and Serial Number of Equipment 5. Time Expended Repairing/Service: Labor Hours, Rate, Materials 6. Summary of Work Performed and Accepted by End-User, with Government Representative's Printed name and Signature) Completed Field Service Reports are required prior to acceptance of any invoice. Failure to submit a Field Service Report to NMCSD Biomed can result in delay of payment or rejection of invoice from Government. It is highly recommended that the contractor attach a copy of the Field Service Report to their Wide Area Workflow Invoice in addition to the required submission to NMCSD Biomed in order to expedite invoicing process. 4.2. NMCSD Preventive Maintenance Requirements: 4.2.1. Preventive maintenance shall be performed in a manner which will minimize corrective maintenance and will include but is not limited to: calibration, adjustment, lubrication, updating software for security, safety, or system functionality issues, testing required to maintain a safe environment of care, electrical safety testing, output testing, replacement of batteries and other shelf life components on a scheduled basis (which becomes corrective maintenance if the component fails due to lack of preventive maintenance). 4.2.2. Make repairs to the extent necessary, as determined by inspection tests or disassembly, to ensure a functional system that will efficiently serve its intended purpose and the technical specification for that equipment as designated by the original equipment manufacturer. 4.2.3. Installation of system update changes to resolve specific product reliability problems. Hardware and software upgrades, defined as those changes that enhance or add product features, are not included. 4.2.4. Preventive Maintenance shall be performed at a minimum of two (2) times per year, with these scheduled preventive maintenance actions to be coordinated with NMCSD BIOMED after contract award. 4.2.5. Preventive Maintenance Completion: Contractor must insure that 95% or more of all periodic maintenance is performed within 30 days of due date, and that 100% of periodic maintenance is performed within 60 days of the due date. 4.2.6. Equipment in Use: If, for reasons beyond the Contractor's control, equipment is not made available for maintenance for the entire 30 days before the maintenance due date, and 60 days following due date, the Contractor shall immediately notify the COR. 4.2.7. Equipment Unable to Locate (UTL): If the Contractor is unable to locate an item within the maintenance window specified, the Contractor shall immediately notify the TR. The TR may determine that the property has been disposed of or otherwise inactive or unavailable for use and may adjust the equipment covered under this Statement of Work accordingly. 4.2.8. 100% Preventive Maintenance: Under the circumstances of 4.2.6. and/or 4.2.7., the TR and Contractor shall arrange a means of complying with the requirements for preventive maintenance at no additional cost to the government. Equipment determined missing, lost, or stolen shall be exempt from maintenance. 4.2.9. Uptime Rate: The Contractor shall maintain an overall uptime rate of 95% or better for all equipment covered by this effort. Individual uptime rate for specific equipment, if required, will be as specified on Appendix A. 4.2.10. Uptime Calculation: Uptime is calculated on a rolling 6 month basis. Until the Contractor has at least 6 months of performance history with NMCSD, the uptime shall be calculated cumulatively for the entire duration of the contract. 4.3. NMCSD Corrective Maintenance Requirements: 4.3.1. Correct inoperable condition in a timely manner. Contractor shall respond no later than two (2) hours after telephone notification from BIOMED, Monday-Friday, between the hours of 0800-1600. 4.3.2. Provide only the work necessary to restore the equipment to a properly serviceable/operating condition by adjustments, replacement parts, or minor repairs when it is determined that extensive repairs and parts are not necessary. 4.3.3. Equipment improvements/modifications shall be made only upon BIOMED written approval and direction. This includes software updates to the device. All updates/improvements/modifications performed shall be notated on the field service report or equivalent. 4.3.4. Notify BIOMED immediately upon receipt of OEM safety recall notices or upon receipt of recall notices pertaining to any parts or materials utilized by contractor on the equipment. 4.3.5. Ensure that the original design and functional capabilities shall not be changed, modified, or altered without express written authorization from BIOMED. 4.3.6. Provide suitable OEM recommended repair equipment/tools required for the satisfactory execution of all repairs made. 4.3.7. Furnish OEM approved lubricants and lubricate wear points within the equipment in accordance with OEM guidelines. 4.3.8. Replacement parts shall be covered by the contractor for the duration of the contract. Extend to the Government all commercial warranties on replacement parts. All replacement parts or supplies utilized shall be new parts or OEM refurbished parts. OEM refurbished parts shall only be accepted upon written request from the contractor to NMCSD Biomed and shall only be utilized/installed upon written approval from NMCSD Biomed to the contractor. 4.4. End-User Requirements: 4.4.1. Service shall be performed on all devices included under contract, regardless of the nature of the cause warranting service/maintenance. Contractor shall not refuse any device under this contract submitted for services. 4.4.2. Services shall be unlimited for the devices under the contract for the term of the agreement. There shall be no cap or limit placed upon the number of repairs/replacements on any individual unit, or on the facility. 4.4.3. Contractor shall provide a replacement device of the same model and manufacture in any case where the Contractor cannot make immediate (less than 12 hours) corrective repairs to the equipment. This replacement with be a new OEM or OEM-certified-as-new unit of the same make and model of the unit submitted for service. The replacement will be swapped out one-for-one with the defective unit, and ownership of the defective unit will be transferred to the Contractor, as-is, without any adjustment or additional compensation. Transfer will be done in accordance with the BUMED Equipment Manual (P-5132). 4.4.4. Replacement devices shall be provided within one (1) business day from the official notification from NMCSD Biomedical Engineering. Loaner/Replacement devices shall be delivered to the Biomedical Repair Division for inclusion in the Command's equipment accountability system. Form DD1149 (Requisition and Invoice/Shipping Document) will be completed and signed prior to transfer. Replacement units will be inspected to ensure acceptability. If a replacement is not acceptable, Contractor will be notified and be required to provide an acceptable unit within 24 hours of notification. 4.4.5 In the case of a replacement device, replacement units shall automatically take the place of the replaced device for the purposes of the contract. The replacement device shall be covered in full by the contract as if it were the item which it had replaced. 4.4.6. All replacements must be compatible with the government-owned Stryker iSuite Surgery System present at NMCSD. Devices which are not compatible with this line of products will not be acceptable. 4.5. Response Time and Labor: 4.5.1. Contractor shall use commercially reasonable efforts to respond by telephone to any report of a malfunction requiring repair within two (2) hours of notification from NMCSD Biomed, Monday through Friday, 0800-1700, Pacific Standard Time. The Contractor shall also provide telephone consulting services, twenty-four (24) hours per day, seven (7) days a week. This consulting service shall be provided to avoid delays in contract service coverage during after-hours and weekend/holiday periods as applicable. Under no circumstances shall the Contractor assume an inquiry, via telephone or any other means, is authorization to provide services not specifically covered by the terms of the contract. 4.5.2. Contractor shall use commercially reasonable efforts to provide on-site support within two (2) business days from notification by NMCSD Biomed, unless otherwise noted in Section 4.4. 4.5.3. Work required in the performance of this contract shall be performed between the hours of 0800 and 1700, Pacific Standard Time. All compensation for labor from the hours of 0800 to 1700 Pacific Standard Time is provided for in this contract and included in the contract price. Contractor may be permitted to arrange for the performance outside of these hours via coordination with NMCSD Biomed at no additional-cost-to-the-government. 4.5.4. Any work that would require overtime must be approved, in writing, in advance by the KO. Any 5. Travel and Related Expenses: Contractor shall be responsible for its service related trip expenses, including round trip travel, mileage, and overnight living expenses. 6. Shipment: The contractor shall not exceed two (2) business days for shipment of all equipment coming from and/or going to NMCSD Biomed minus exceptions or conditions as previously noted in this Statement of Work. All shipping expenses/costs are provided for in this contract and included in the contract price. 7. Liability: 7.1. The contractor shall not be liable for any loss, damage, or delay due to any cause beyond their reasonable control, including but not limited to fire, explosion, theft, flood, riot, civil commotion, war, malicious acts of mischief, or other circumstances outside of human control. 7.2. NMCSD Employees will not perform maintenance or attempt repairs to equipment covered under this contract while such equipment is under the purview of this contract without express, written concurrence from contractor. 7.3. Insurance: Contractor shall be required to have liability insurance to cover any actions on the part of the Contractor or their sub-contractors which result in injury or death to patients, staff, visitors, or other Contractors. Coverage shall be of at least $500,000 per occurrence. Additionally, Contractor is required to have property damage liability insurance of at least $500,000. Liability insurance shall meet the requirements set forth in FAR 28.307-2. 8. Utilities, Facilities, and Equipment Access: 8.1. The contractor may use Government utilities (e.g., electrical power, compressed air, water) that are available and required for any service performed under this contract while at Government facilities. The facilities engineer however must approve of any contractor equipment which would connect to these utilities in order to ensure compatibility with NMCSD utilities. 8.2. Any outages required in order to perform services must be approved by NMCSD Facilities Management prior to initiation of work and shall be performed per Facilities' instruction. Contractor may request Facilities assistance in performing these outages if required. 8.3. Ensure that all use, storage, transport of any materials regulated by OSHA as "hazardous", required for the performance of this contract, is in in compliance with all federal, state, and local regulations. Contractor shall have available MSDS's for any such materials on-site. 8.4. The Contractor shall protect all facilities from damage caused by the Contractor and shall repair, at no additional cost to the Government, all damages caused by the Contractor's activities. During performance of services, Contractor shall keep the site safe, neat, clean and orderly. Contractor shall be responsible for all means, methods, techniques, sequences, and procedures of the services 8.5. Access to Equipment: Contractor shall be provided reasonable access to all equipment that is to be serviced and utility outlets required to do the service. The contractor shall be free to start/stop all primary equipment incidentals to the operation of the maintained equipment after permission is received from on-duty personnel responsible for such equipment. 9. Security and Safety Requirements: 9.1. The Contractor is required to submit/complete Naval Base San Diego Base access requirements for access to NMCSD. Contractor shall contact Naval Base San Diego Security Department at 619-556-1653/5336 or at https://www.cnic.navy.mil/regions/cnrsw/installations/navbase_san_diego/om/force_protection/pass_and_decal.html in order to obtain the necessary clearances to perform this contract. All costs for completing the requirements for access are the responsibility of the contractor. While waiting for authorized access, contractor shall, at a minimum, contact NMCSD Biomed not later than 1400 on the day prior to a scheduled visit to submit the required information to complete the NMCSD Temporary Security Pass. In case of emergent repairs or service, the contractor shall wait at the NMCSD Main Gate for escort from Biomed personnel. 9.2. Identification, Parking, and Smoking Regulations at NMCSD: Field service personnel shall wear visible photo identification at all times while on the premises of NMCSD. It is the responsibility of the field service personnel to park in the appropriate designated parking areas. Information on parking is available from NMCSD Security personnel. Smoking is prohibited inside any buildings of NMCSD and is restricted to designated smoking locations only. Possession of weapons, alcohol, or pharmaceuticals that are not over the counter and not prescribed to the individual/family is prohibited on the premises. Enclosed containers, including tool kits, are subject to search. Violations of regulations may result in citation answerable in the United States (Federal) District Court. Violation of any policy which results in lost time for Contractor or his sub-contractors is the sole responsibility of the Contractor, and shall not be charged to the government. Contractor employees shall demonstrate appropriate behavior and dress at all times. 9.3. Contractor Check-In/Check-Out: Contractor is required to report to Material Management Department, Biomedical Repair Division at Building One (1), Ground Floor, Room GD-18H1 at NMCSD prior to and upon completion of any services or repair work performed. 9.4. General Safety Requirements: The Contractor shall exercise safety precautions as the TR may determine to be reasonably necessary to protect the lives and health of occupants of buildings in which work is being performed. NMCSD will notify the Contractor of any non-compliance with the foregoing conditions and the action(s) to be taken. Service vendors shall, after receipt of such notice, immediately correct the conditions to which attention has been directed. If field service engineer refuses to comply promptly, the TR may issue an order stopping all or any part of the work. Under such circumstances, the KO and hold the service vendor in contract default. Nothing in this section will be construed so as to limit the Contractor or his sub-contractors responsibilities to comply with any existing law, nor to switch jurisdictions. 9.5. Government Right of Refusal: NMCSD reserves the right to reject any of the contractor's personnel and refuse them permission to enter the premises or work on NMCSD equipment. This right may be exercised at any time. The reasons for rejections may include: lack of training and experience, but may also include but not be limited to: behavior, attire, security concerns, immigration status. 10. Compliance with Applicable Laws: Contractor shall be knowledgeable of and comply with all applicable Federal, State, and local laws, regulations, and requirements regarding the conduct of his business. The Contractors personnel shall comply with the DoD Information Assurance Policies applicable. Contractors are required to maintain a Drug Free Workplace, as well as to require any sub-contractor to do the same. Contract shall require wage determinations and comply with applicable Federal and State worker's compensation and occupational disease statutes. 11. Modifications to Contract: Only the KO has the authority to obligate the government, and then only in writing. No modification or instruction from any party shall be construed to authorize the Contractor to take any action for which they expect compensation without written authorization from the KO. 12. Invoicing: All invoicing shall be done in accordance with this statement of work and in accordance with contract. Failure to do so may delay or interfere with payment for services rendered. 13. NMCSD Points of Contact: For all matters concerning performance of this contract, the primary point of contact shall be: Biomedical Repair Division, Material Management Department Building One, Ground Floor, Room GD-18H1 Naval Medical Center San Diego 34800 Bob Wilson Drive San Diego, CA 92134 TEL: 619-532-8010 Fax: 619-532-8013 Email: usn.nmcsd-contractadministrator@mail.mil For administrative matters, the contractor may contact the contracting officer as designated in blocks 7.a, 7.b, 8, and 9 as found on the Standard Form 1449 issued for the contract, or may contact: Material Management Department Naval Medical Center San Diego 34800 Bob Wilson Drive San Diego, CA 92134 TEL: 619-532-8110 FAX: 619-532-5596 APPENDIX A: Main Operating Room Stryker Camera Heads ECN SERIAL # NOMENCLATURE MFG 038262 10C001794 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 108933 11G038854 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 128349 10B005804 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 128961 07G042074 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 134212 07G016334 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 134261 08D045884 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 134768 07F023784 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 134769 06L031194 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136157 10K067174 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136158 10C001794 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136159 10D041024 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136160 07H038394 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136161 08I006234 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136163 08B020024 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 136167 07A021914 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 137392 13E014414 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 137393 08D045714 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 137394 07A017534 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 137395 08J003054 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 137396 08E023824 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 137397 11L000844 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 138228 10A017734 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 138229 07A059674 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 138230 07D030244 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 139203 09L065394 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 139204 08C057574 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 140275 07I045464 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 140883 07D036174 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 140884 08I029454 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 140885 10J060784 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 140886 11F017354 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 140887 08H007244 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144258 08C003754 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144260 09E038444 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144262 08J072824 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144263 07F025634 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144274 06H053864 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144275 09H017044 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144276 10L052454 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144277 11C042404 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144278 15C000244 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 144279 07H043184 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY 145561 08E027824 CAMERA, VIDEO, ENDOSCOPE STRYKER ENDOSCOPY
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/BUMED/N00259/N0025918Q0065/listing.html)
Place of Performance: Address: Naval Medical Center San Diego, 34800 Bob Wilson Drive, San Diego, California, 92134-5000, United States; Zip Code: 92134-5000
Record: SN04956436-W 20180617/180615230630-fae314623a9d2b4243d6ead38338e6f6 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

J -- Service maintenance for Stryker Camera heads & Couplers