SOURCES SOUGHT
66 -- Mirror vacuum chambers and high precision mover systems (VCMS) for L2S-I
- Notice Date
- 6/18/2018
- Notice Type
- Sources Sought
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC_L2SI_Vacuum_Chamber_Mirror_System
- Archive Date
- 7/18/2018
- Point of Contact
- Allan P Lazarus, Phone: 6509262425
- E-Mail Address
-
lazarusa@slac.stanford.edu
(lazarusa@slac.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC National Accelerator Laboratory/LCLS is seeking a supplier of five mechanical systems as part of the LCLS II scientific instrument(LCS-I) program. This posting is to identify prospective suppliers for a formal Request for Proposal. This posting is not a solicitation and does not request or require a proposal. Interested suppliers must respond through the Interested Vendor tab in this posting. Each system is composed by two main parts: A mirror assembly (with mirror holder, bender, and interface plate) designed and/or realized by SLAC. Two of the three systems will have two mirrors in each chamber. The other three will have a single mirror in each chamber. The vacuum chamber and mover system (including all the motions, motors, encoders and supports) shall be designed and provided by the supplier. Systems with two mirrors will require two separate mover systems. The VCMS has to be UHV compatible, hosting a 1 meter long mirror (plus its holder, cooling and bender), and provide pointing stability better than 25 nrad rms. The Vendor is responsible for providing complete, tested systems and mechanics, delivered safely to SLAC, and to participate in the installation of the systems in their final locations. The Vendor is responsible for performing all necessary tests, to guarantee that all specifications and requirements are met. The Vendor is responsible for providing all necessary documentation to the SLAC team, to enable future connection, installation, and operation of the VCMS, and to maintain them at their specified performance. All of the motions have to be performed by moving the mirror independent of the chamber. Angular motion as large as 7 mrad with 25 nrad steps and transversal motion as large as 50 mm with 0.01 mm step are required. The cooling and bending system is designed by SLAC. SLAC will provide the exact location (with respect the mirror optical pole) and dimension of the flanges needed to accommodate them. SLAC will also provide a detailed drawing of the interface plate and all the drawings the vendor will need to properly accommodate the mirror assembly into the vacuum chamber.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_L2SI_Vacuum_Chamber_Mirror_System/listing.html)
- Place of Performance
- Address: 2575 Sand Hill Rd, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN04958686-W 20180620/180618230903-3ae7ac86679c87088842f2bb8c6caa09 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |