SOURCES SOUGHT
J -- Performance Assurance & Reactive Service Program - Sources Sought Notice
- Notice Date
- 7/13/2018
- Notice Type
- Sources Sought
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, HQ Air Force Test Center (AFTC) - Edwards, 5 S WOLFE AVE, Edwards AFB, California, 93524-1185, United States
- ZIP Code
- 93524-1185
- Solicitation Number
- FA9302-18-R-4202
- Archive Date
- 8/2/2018
- Point of Contact
- Jennifer A. Story, Phone: 6612778658
- E-Mail Address
-
jennifer.story@us.af.mil
(jennifer.story@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Draft PWS Sources Sought Notice THIS IS A SOURCES SOUGHT NOTICE FOR INFORMATION ONLY. THIS IS NOT A REQUEST FOR PROPOSAL OR QUOTATION OR AN ANNOUNCEMENT OF A SOLICITATION. This sources sought request for information is for the purpose of conducting market research to provide data for planning purposes. This sources sought synopsis announcement does not constitute a formal solicitation and is not a request for proposal, request for quote, invitation for bid, does not obligate the government to award a contract, issue a solicitation, reimburse respondents for any proposal preparation and/or submittal costs, nor does its issuance in any way restrict the Government as to its ultimate acquisition approach. The Government will not pay for any materials provided in response to this notice and submittals will not be returned to the sender. Edwards AFB is seeking capabilities packages of potential sources that are capable of providing the following: The Performance Assurance and Reactive Service program contractor will be required to perform all the major maintenance checks that are recommended by the machine manufacturer. Comprehensive checks will be made by factory trained technicians on the Mechanical, Electrical, Air, Coolant, Spindle and Way Lube systems. Standard checks will also include yearly ball bar calibration for preventive and comprehensive diagnostic to provide an overall assessment of machine performance. Please note in an effort to not disrupt the facilities productivity our technician will perform and complete any needed preventive maintenance services on 1 to 2 machines at a time before working on any further machinery. For each daily visit the technician will work 8 hour days typically beginning Monday morning. Machine areas inspected include but are not limited to: • Mechanical System Check machine level Verify spindle sweep • Check gear shift operation • Check spindle lube and air blast • Check spindle orientation alignment • Check shot pin operation • Change gearbox oil • Check backlash in X, Y, and Z-axis • Inspect drive belts • Inspect and adjust tool changer system • Inspect spindle taper condition • Inspect way covers & wipers • Check draw bar height • Inspect rigid tap encoder operation • Check tool change operation • Clean/lubricate tool changer • Inspect counterbalance system • Inspect lines, hoses and cables • Way Lube System • Clean filters • Inspect lines and fittings • Check operation • Verify lube/pump operation • Coolant System: Remove/check pump and motor, (Inspect or Clean coolant tank and replace coolant as needed) • Air System: Replace filters, Check pressure/adjust regulator, Inspect system for leaks • Electrical System: Check voltages, Clean electrical cabinet, Inspect connections/terminals and grounds • Inspect or replace tool change relays • Replace or clean fan filter • Check limit switches/safety locks • Inspect motor brushes, clean & remove brush dust • Lathe Only: Verify turret/spindle alignment • Manual Machines: Change oil, filter and belts, Lubricate system and clean as necessary to be qualified as working property. • Adjust Gibs • Check level and alignment • Inspect general machine function Equipment to be serviced: Manufacturer Model Serial Number Large OMAX SS100 BS11639 Small OMAX 2692 A511869 4 FT Accupress 7254 10 FT Accupress 713010 7692 Eaton Leanard VB 42 ELEC RM 861292 LSB 10/15 Gardne Aircraft Tooling Fixture riveter GAT21 Eaton Leanard VB 200 SE RH 860269 IPC 9/2004 Con Rae Double Flare DF-HD 85027-L51 PHI Single Flare 3CPV-5-4M 06-11-013 Zephyr MFR Hot/Cold Dimpler ZP-450EA-36 258 Roper Whiney Corp, Corner Notcher 169-9-88 Comaca Unipunch EHN260 249 Doall Drill Press DTR 28 65-8504 Webb Roller 3048 8273 J.M. Montgomery 9616H 81651 Scotchman Ind. Chop saw CP03S0NF/PK/PD 1491NF1000 US Ind. Tool suppco. Compression riveter US150BR-12 505 2 Betenbender Shear 6-10GA 242215 LeRoy Somey 24" Disc Sander W/vaccum D24 815 Eckold/Piccolo Strinker/Strecther KF330 529 Delta Drill Press 96D83503 Burr king Belt Sander 760 MBD 36-18TS 3653-93 Accushear 14' shear 875014 2616 Marvel Saw E2125PC 212520302 Pauli Media Blaster RAM 35 011328 Plastic PVI 408XTX P408XTX-20181008 Northfield Planer 900121-A 8KGH-1262 Northfield Joiner 24HD 871209-H Delta Joiner DJ20 37350 471 Busch Vacuum System DVED-2-RA0250 D-3804 Radial Arm Saw 47A-36 86.0032 Panel Saw 5860-78 LTS32PFHN4A3 Whirwind Sander 855 597610 Do-all Drill Press DTR23 64-8504 Bridgeport Series 2 7188 Hass EC-2000 51639 Hass TM-2 44761 Hass SL-20 3075290 Hass TL-2 3075940 Hass VF-4 1054958 Hass VF-4 1054951 Hass VF-9/50 1062606 Hass Minimill 1068638 Hass TL-1 3083287 Hass TM-2 1053347 Hass TM-2 1053346 Hass VR-8 1074344 Monarch 610 47417 Monarch 610 47416 Hardinge HLV-EM-JC 977GT Hardinge HLV-DR 14239T Clausing Colchester Triumph VS VT1113 Clausing Colchester Student 2500 306176 Bridgeport Series 1 HDNG1792 Bridgeport Series 1 HDNG1790 Landis 3RH LT89154 Giddings&Lewis 550 550285 Lodge Shipley Powerturn 49812 Gardner Rivet Compressor ARDR 8162C001 SuperLift XUltralift Model SL MSL 168 15 5014 1 Ingersoll Rand Air Compressor Model SSRUP6-40-125 CBV101325 Ingersoll Rand Air Compressor Model SSRUP6-40-125 CBV101326 Compressed Air Dryer Model HPRP500 1000003303612 Stanley Vidmar Stak System NO Data No Data Ingersoll Rand Air Main Air Compressor R1601E-A125 VFF1194U13036 Ingersoll Rand Air Main Air Dryer NVC200A 537082 Ingersoll Rand Air Backup Air Compressor R110I-A125 V1182U11034 Ingersoll Rand Air Backup air Dryer NVC800A4HN 502830 Hysraulic Test Stand AV843 110 Hose Assy Machine 494063DM00256 E148HS00000038 Hose Cut-Off Machine P869MS E148HS00000019 Stationary Static Press DYA-8940K 101 Chicago Pneumatic Air Dyer CPX 1200 CAI281704 Chicago Pneumatic Air Compressor CPUS 100 AP120533 Binks Oven BWN-66_8E 42719703 Strip Tank ACT 242613 ACT STR4 Pauli Glass media Blaster #1 Ram 35 11240 Pauli Plastic media #2 Ram 35 Size 2 11166 Pauli Walk-in Blaster #4 1124 P&G Pram Machine Blaster PGM 31 273 Interested firms are invited to submit a Statement of Capability (SOC) showing the company's ability to fulfill the requirement described above along with a free rough cost estimate. It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. This is not a solicitation nor will a solicitation package be issued as a result of this announcement, and no award shall be made as a result of this announcement. In the event that a solicitation is developed, it will be assigned a formal Request for Proposal (RFP) number or Request for Quotation (RFQ) and the announcement may be published on FEDBIZOPPS. Responses to this notice will assist the government in identifying potential sources and determining if a set-aside of the solicitation is appropriate. For the purposes of being considered a small business, the following applies: CONTRACTOR CAPABILITY SURVEY Business Information Please provide the following business information for your company/institution and for any teaming or joint venture partners: • Company/Institute Name: • Address: • Point of Contact: • CAGE Code: • Phone Number: • E-mail Address: • Web Page URL: • Size of business pursuant to North American Industry Classification System (NAICS) Code: 811310 Based on the above NAICS Code, state whether your company is: •• Small Business (Yes / No) •• Woman Owned Small Business (Yes / No) •• Small Disadvantaged Business (Yes / No) •• 8(a) Certified (Yes / No) •• HUBZone Certified (Yes / No) •• Veteran Owned Small Business (Yes / No) •• Service Disabled Veteran Small Business (Yes / No) •• Central Contractor Registration (CCR). (Yes / No) • A statement as to whether your company is domestically or foreign owned (if foreign, please indicate the country of ownership). NAICS - 811310 Size Standard - $7,500,000 The Government reserves the right to set-aside any subsequent acquisition based upon known sources and/or responses to this synopsis. Responses are requested no later than: 8:00 A.M. (PST) on 18 JULY 2018. Direct responses and/or questions to: Jennifer Story, jennifer.story @us.af.mil. Direct expression of interest as well as required documentation should be addressed in writing to the Contract Specialist. All prospective offerors are responsible for monitoring this site for the release of all other information pertaining to the synopsis and solicitation. Contracting Office Address: AFTC / PZIEB 5 S. Wolfe Ave Edwards AFB, CA 93524 United States Place of Performance: EDWARDS AFB, CA Primary Point of Contact: Jennifer Story jennifer.story@us.af.mil Secondary Point of Contact: Monika Masei monika.masei@us.af.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/AFFTC/FA9302-18-R-4202/listing.html)
- Place of Performance
- Address: Edwards AFB, California, 93524, United States
- Zip Code: 93524
- Zip Code: 93524
- Record
- SN04991025-W 20180715/180713230823-b3dc45a125d9d3f3e03d5dc65569a606 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |