SOURCES SOUGHT
25 -- Mounted Bucket and Installation
- Notice Date
- 8/6/2018
- Notice Type
- Sources Sought
- NAICS
- 336112
— Light Truck and Utility Vehicle Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, MICC, MICC - Fort Riley, 1792 12th Street, Fort Riley, Kansas, 66442-0248, United States
- ZIP Code
- 66442-0248
- Solicitation Number
- W911RX-18-Q-0108
- Archive Date
- 8/25/2018
- Point of Contact
- Chrystal A. Artigue, Phone: 7852394903, Chrystal A. Artigue, Phone: 7852394903
- E-Mail Address
-
chrystal.a.artigue.civ@mail.mil, chrystal.a.artigue.civ@mail.mil
(chrystal.a.artigue.civ@mail.mil, chrystal.a.artigue.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Brand Name or Equal to Terex LT40 Aerial Device Installation will be at Vender's Location Mounted Bucket Equipment Specs Working Height- 45'6" Lower Controls- Individual Levers @ turntable Lower Boom- Filament Wound High Strength Fiberglass Insert Providing Insulation Gap Upper Boom- Filament Wound High Strength Fiberglass Boom Probiding Insulation Gap Boom Rest w/Ratchet Style Tie Down Rotation Self-Locking Worm Gear Rotation Drive Provided and Equipped with Bi-Derectional Motor Continuous Unrestricted Rotation Rated for 46KV Category C Machine in Accordance w/ ANSI/SIA A92.2-2009 Full Pressure Open Center Hydraulic System Powder Coat Painted White Two Complete Service Manuals Warning Decals Pedestal w/20 Gallon Integral Tank 20" x 30" x 42" End Mounted Platform w/ [1] Access Step w/Non-Slip Surface Safety Harness and Lanyard Insulated Platform Liner Tested at 50KV AC Waterproof Platform Cover Auxiliary Power Boom Tip w/4-Function Controls and Platform Rotator Upper Controls- "Control Plus" Single Stick Controller Platform Rated @ 400 lbs Hydraulic Platform Rotator Hydraulic Platform Tilt @ Lower Control Hydraulic Tool Outlets @ Platform Engine Stop/Start Controlled at Platform and Lower Controls Chassis Specifications Customer supplied 2014 Ford F550 4x4 V10 Gas Engine Install to include: Remove service body and rear bumper Install Terex sub-frame Install torsion bar for stability Rear spring build up Sumo front spring helpers Under hood hydraulic pump Reinstall body Supply and install 24" tail shelf Install new Terex LT40 aerial device Preform Stability, Dielectric and operational tests when complete Note: No body repair or paint work on used body or chassis. Boom rest, Tail shelf, and rear under drive protection to be painted Glass Black.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/6d55ef98be280fdefcc43cc179dcab02)
- Record
- SN05022566-W 20180808/180806231205-6d55ef98be280fdefcc43cc179dcab02 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |