SOURCES SOUGHT
J -- Fuel Pump Supports Overhaul/Remanufacture
- Notice Date
- 8/15/2018
- Notice Type
- Sources Sought
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Philadelphia, 100 Penn Square East, Wanamaker Bldg (RM 643), Philadelphia, Pennsylvania, 19107-3390, United States
- ZIP Code
- 19107-3390
- Solicitation Number
- W25PHS81626512-Fuel_Pump_Supports
- Archive Date
- 9/4/2018
- Point of Contact
- Dillon M. Lucas, Phone: 2156566915, Michael J. Hunter, Phone: 2156566774
- E-Mail Address
-
dillon.m.lucas@usace.army.mil, michael.hunter@usace.army.mil
(dillon.m.lucas@usace.army.mil, michael.hunter@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- U.S. Army Corps of Engineers, Philadelphia District 1. Action Code: Sources Sought 2. Subject: Fuel Pump Supports Overhaul/Remanufacture 3. RFI No.: W25PHS81626512 4. Response date: 20 Aug 18 10:00 AM EST 5. Place of performance: Contractor's facility 6. Description: This is a Sources Sought Notice and is for INFORMATION & MARKET RESEARCH PURPOSES ONLY. This IS NOT a request for proposals, quotations, or bids. Responses to this request will not be returned. Not responding to this sources sought does not preclude participation in any future and potential solicitation. It is the intent of the USACE Philadelphia to use this information for market research purposes only. The survey is being conducted to determine the interest of industry within NAICS code 811310, and to establish that there are adequate large and/or small business contractors for providing the work described below. The Government WILL NOT pay for the provision of any information, nor will it compensate any respondents for the development of any such information. If a formal solicitation is released, it will be via Federal Business Opportunities (http:www.fbo.gov). The U.S. Army Corps of Engineers is looking for qualified sources to provide the following: Twenty-eight (28) wide cam style Alco Diesel Engine fuel pump support assemblies with crossheads, lifter, bushings, cams and all other associated parts, cleaned, examined, repaired and reassembled using new, genuine OEM Fairbanks Morse/ALCO parts. All units shall be made ready for immediate installation. The Contractor shall provide all necessary labor, parts, materials, services of a qualified and experienced marine engine or locomotive repair facility to overhaul and rebuild ALCO Diesel Engine wide cam fuel pump support assemblies using all new parts, except for main casting, in accordance with ALCO specifications, including all instructions, bulletins, and service manual DRP- 14429E and MI-11049K. MINIMIUM NEW PARTS REQUIRED: * P/N 2321564-1Adjusting screw28 total * P/N 2322532Adjusting screw seat28 total * P/N 2241281-1Snap Ring28 total * P/N 2153271Nut special Adj. Screw28 total * P/N 4321041F.P. Crosshead Cam Roller28 total * P/N 4320012-1F.P. Crosshead Lifter28 total * P/N 4321051Cam Roller Bushing28 total * P/N 4321061Cam Roller Pin28 total * P/N 2322671-1Locking Plate for Cam28 total Roller Pin * P/N 21549617Cap screw Locking Plate56 total * P/N 2157001Lock wire28 Ft. (approx.) * P/N 2321598Floating Bushing wide28 total * P/N 4321063Fulcrum Pin for F.P. Lifter28 total * P/N 2322672Locking Plate28 total * P/N 21549613Cap screw Locking Plate56 total * P/N 2151491-1Washer 3/8 inch56 total * P/N 23202820-1 * P/N 2241491Air & Exhaust pushrod Lifter Bushing in Lifter56 total 56 total * P/N 2241261Pushrod Lifter Seat56 total * P/N 2241342Cam Roller56 total * P/N 23202819Cam Roller Pin56 total * P/N 2241032Retaining Ring for Cam112 total Roller Pin * P/N 241354-1Fulcrum Pin F/Pushrod Lifter28 total * P/N 21528312Taper Dowel28 total * P/N 2241501Spacer f/Pushrod Lifter28 total * P/N 4321021Aux Lower Springs28 total * P/N 4321022-1Aux Upper Springs28 total * P/N 4461013Aux Spring Outer28 total * P/N 24610940Aux Spring Inner28 total * P/N 2181196"O" Ring28 total * P/N 21522612-1Gasket cover to support28 total * P/N 2153409Gasket Support cover to Block28 total * P/N 2153409-1Gasket Support Cover28 total Gasket, Support casting mounting to block28 total All hardware that is not listed such as cotter pins, grease fitting, cap screws, washers and etc. as applicable, shall also be provided. The Government is issuing this Request for Information (RFI) to identify sources available to perform the above work. All interested business concerns for this requirement may submit the following: Company name DUNS number CAGE Code Type of business concern (small business, large business, etc.) Years in business Statement of capability and qualifications of the organization to perform the requirement The North American Classification System (NAICS) code for this acquisition is 811310. ** EACH SUBMISSION SHOULD NOT EXCEED 5 PAGES TOTAL** Notice to potential contractors: All offerors who provide goods or services to the Federal Government must be registered in the System for Award Management (SAM) located on the website https://www.sam.gov/portal/publi/SAM/#1. Additionally, all Services Disabled/Veterans Owned Business or Veterans Owned Small Business must be registered with the Department of Veterans Affairs Center of Veterans Enterprise Vet Biz Registry located at http://vip.vetbiz.gov. Responses should be submitted electronically via e-mail to: Dillon Lucas Contract Specialist E-mail: Dillon.m.lucas@usace.army.mil Office Phone: (215) 656-6915 All responses shall be received on or before 20 August 2018, 10:00 AM EST.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA61/W25PHS81626512-Fuel_Pump_Supports/listing.html)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN05038974-W 20180817/180815231436-b01cf09ba29ad0bc88adda5a142c09bd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |