SOURCES SOUGHT
34 -- PLASMA TABLE - MWMSS - DRAWINGS
- Notice Date
- 8/24/2018
- Notice Type
- Sources Sought
- NAICS
- 333519
— Rolling Mill and Other Metalworking Machinery Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - RI (W9098S) (JMTC-RIA), BLDG 211 RODMAN AVENUE, Rock Island, Illinois, 61299-5000, United States
- ZIP Code
- 61299-5000
- Solicitation Number
- W9098S18PLASMATABLE
- Archive Date
- 9/22/2018
- Point of Contact
- Amy Nissen, Phone: 309-782-5189
- E-Mail Address
-
amy.l.nissen.civ@mail.mil
(amy.l.nissen.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- 11B5190799 - PLASMA CUTTER ACCESSORY CASE 11B5190177 - PLASMA TRUNK The purpose of this Sources Sought / Market Research is to identify potential sources capable of providing a Computer Numerically Controlled (CNC) Plasma Table to support the Metalworking and Machining Shop Set (MWMSS). The requirements are as follows: Table Requirements: Nominal Table size: 4'x4' Minimum Table Capacity: 5/8" steel (400 pounds) Minimum Travel Speed: 500 ipm Minimum cut speed: 400 ipm Maximum Slat Spacing: 3" Maximum Power Requirement: 120VAC, 15 amps Computer Connection: Ethernet Maximum Setup Time: 5 hours from fully disassembled in storage containers Shall include an automatic torch height control. Shall include a magnetic break away torch holder. Shall be compatible with the Hypertherm Powermax 65 with CPC port. Shall be compatible with the Hypertherm 15 degree hand torch (PN: 059471), 75 degree hand torch (PN: 059474), or machine torch (PN: 059477). Shall be able to be disassembled and packaged without cutting or welding in the two containers specified by drawings 11B5190177 and 11B5190799 with protective packaging materials for shipment. Table shall be operated using g-code. Software Requirements: Table shall include software capable of building g-code from.dxf files. Table shall include any software that is necessary to operate CNC table. Software shall not require internet access to operate. Software requirements shall not exceed: Windows 7 Processor: Multicore, 2.26 GHz with 3 MB of L2 Cache RAM: 4GB Video Card: 256 MB, 128-bit interface, DirectX 10.1 support Vendors who are interested shall provide a capabilities statement along with their System for Award Management: (https://sam.gov/) vendor cage code and whether or not their business is large or small. Please respond no later than COB 7 September 2018 by email ONLY to RIA-JMTC Contract Specialist, Amy Nissen at AMY.L.NISSEN.CIV@MAIL.MIL. No telephone requests will be accepted. This is a market survey for planning purposes only and should not be construed as a Request for Quote or as an obligation on the part of the Government. The Government does not intend to award a purchase order on the basis of this market survey or otherwise pay for information solicited. Rock Island Arsenal will only utilize the information you provide in developing its acquisition approach for future requirements.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/1650cd107b90b3250bd9fe283e497ab9)
- Record
- SN05055216-W 20180826/180824231303-1650cd107b90b3250bd9fe283e497ab9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |