SOURCES SOUGHT
C -- Architect-Engineer Single Award Task Order Contract (SATOC) for the Lake City Army Ammunition Plant, Independence, Missouri
- Notice Date
- 8/24/2018
- Notice Type
- Sources Sought
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Kansas City, Attn: CENWK-CT, 635 Federal Building 60l East 12th Street, Kansas City, Missouri, 64106-2896, United States
- ZIP Code
- 64106-2896
- Solicitation Number
- W912DQ18R4025
- Point of Contact
- Carol W. Hodges, Phone: 8163893732
- E-Mail Address
-
carol.w.hodges@usace.army.mil
(carol.w.hodges@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- The following is a Sources Sought Notice. The Government is seeking to identify qualified sources under North American Industry Classification System (NAICS) 541330, Engineering Services. This Sources Sought announcement is for market research information only and is to be used for preliminary planning purposes. No proposals are being requested and none will be accepted in response to this notice. THIS IS NOT A SOLICITATION FOR PROPOSALS, AND NO CONTRACT WILL BE AWARDED FROM THIS NOTICE, nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any cost incurred in preparation of a response to this notice. The U.S. Army Corps of Engineers, Kansas City District seeks qualified Architect-Engineering (A-E) firms interested and capable of providing an array of design services to execute projects that support Lake City Army Ammunition Plant’s mission, including the Next Generation Ammunition program. The work will be located primarily at Lake City Army Ammunition Plant in Independence, Missouri, with the possibility of work within the Kansas City District military construction boundaries. The Government is contemplating an unrestricted A-E Single Award Indefinite Delivery Contract solicitation. The estimated magnitude of this Single Award Task Order Contract (SATOC) is $48M. It is anticipated that this solicitation will be published in the Federal Business Opportunities in the fall of 2018. Task Orders issued under this SATOC will support the Next Generation (NextGen) Ammunition program and other LCAAP requirements. NextGen Task Orders will include, but not be limited to design of facilities of various small caliber General Purpose and Special Purpose ammunition production lines. Production facilities will contain primary production areas including, but not necessarily limited to: casing, bullet production, primer/propellant loading, and high speed assembly. Support areas include parts maintenance workshops, chemistry lab, raw materials receiving and storage, product packaging, product storage and shipping, offices, locker rooms, meeting/break rooms, and cafeteria. Some aspects of the NextGen design effort may be classified, therefore, the A-E must have personnel assigned to those tasks that have SECRET Clearance or are capable of receiving a SECRET Clearance. The A-E will be required to perform planning efforts to support the NextGen program and provide either full design and specifications or gather requirements to prepare a Design-Build RFP for the facility(ies) based upon the final product line design requirements. Product lines are in various stages of development and the successful A-E will provide engineering support and work interactively with the government/industry NextGen development team during the latter stages of the various product line development with respect to how those requirements decisions impact final facilities, and infrastructure/utility needs. Services including planning efforts, Request For Proposal (RFP) preparation, cost estimating, sustainable design, technical integration, commissioning, systems integration, and construction phase services will also be required. The A-E will be required to provide a design that meets all DoD and Army explosives safety standards, including all protective construction requirements of UFC 3-340-02 and all necessary personnel protection as required by DoD 6055.09-M. The A-E will be required to obtain appropriate approvals through U.S. Army Technical Center for Explosives Safety (USATECS) and Department of Defence Explosive Safety Board (DDESB). The A-E will also be required to incorporate design features that allow for rapid, flexible, high quality construction. Task Orders issued to support other LCAAP mission areas will include a wide variety of design, planning, studies and other efforts These projects will include, but not be limited to: Facility planning, pre-design services, design of new facilities (office buildings, ammunition storage bunkers, warehouses, etc.), Design-Build and Design-Bid-Build RFP preparation, existing conditions studies, planning studies, life cycle cost analysis, roof repair/replacement designs, building demolition, site work, facility repair or renovation, mechanical and electrical system design/upgrades. Assignments will include preparation of plans and specifications, cost estimating, value engineering screenings and studies, field inspections, verification of existing conditions, pilot studies, surveying and mapping, geotechnical investigations, commissioning, construction-phase services (engineering design during construction, checking design drawings, submittal reviews), environmental assessments, archaeological investigations, drainage/flood studies, evaluations of green technologies and sustainability/ energy conservation measures. The Kansas City District is soliciting feedback from industry as part of our market research efforts associated with this acquisition and is considering various acquisition strategies to deliver this project and requests input from industry. The following information is requested in this Sources Sought (SS) announcement with a limit of ten (10) pages for your response: 1. Organization name, address, email address, website address, telephone number, and business size (small or large) and type of ownership for the organization; include DUNS number and CAGE code. 2. Firm’s interest in providing a proposal on the pending solicitation once issued. 3. Experience for Next Generation Ammunition Program assignments: Provide evidence of capabilities to perform work comparable to that required for this project (e.g. design of an industrial building for the purposes of arms manufacturing, design of facilities that had significant structural requirements including compliance with UFC 3-340-02 and DoD 6055-09-M, obtaining approvals through USATECS and DDESB, experience with design that allows for rapid construction, design of facilities requiring SECRET or higher classification). Provide three recent relevant/comparable projects (not more than 10 years old). Include the project name; dollar value of the project; description of the key/salient features of the project and those that demonstrate similarity to the work required under this SATOC; identify the contracting office & the customer/user (include POC information); and identify/discuss the acquisition method (e.g., sealed bid, best value), contract type (e.g., Firm Fixed Price, Fixed Price Incentive Successive Targets), and delivery method (e.g., Design-Bid-Build, Design-Build, etc.). 4. Identify if, based upon the scope of this project, you would form a joint venture to execute this work. Provide Joint Venture information, if applicable, including DUNS number and CAGE code. 5. Provide your firm’s Bonding Capability (construction bonding level per contract and aggregate bonding level, both expressed in dollars) via a letter from bonding company. Include any concerns associated with providing performance and payment bond for the projected contract value identified. Please send your Sources Sought responses via email to Carol.W.Hodges@usace.army.mil. Submissions should be received by 12:00 p.m. CDT, 10 September 2018. This synopsis is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA41/W912DQ18R4025/listing.html)
- Place of Performance
- Address: Lake City Army Ammunition Plant, 25201 MO-78, Independence, Missouri, 64056, United States
- Zip Code: 64056
- Zip Code: 64056
- Record
- SN05055790-W 20180826/180824231534-d4b60c24beda566bab38d909b2c08f0e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |