SOLICITATION NOTICE
93 -- OBSERVATION WINDOW
- Notice Date
- 10/16/2018
- Notice Type
- Presolicitation
- NAICS
- 327212
— Other Pressed and Blown Glass and Glassware Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Construction & Equipment, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE8E619Q0006
- Archive Date
- 10/31/2018
- Point of Contact
- Tai T Nguyen, Phone: 2157374870
- E-Mail Address
-
tai.nguyen@dla.mil
(tai.nguyen@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- DLA Troop Support intends to issue a Request for Quotation (RFQ) for the acquisition of NSN (National Stock Number) 9340-01-439-2377 (OBSERVATION WINDOW), which is under solicitation number SPE8E619Q0006 Procurement Item Description Text: WINDOW, OBSERVATION EXCEPTIONS TO DWGS: DR 12932490 and QS 12932490-Use SAE AS5942 in lieu of MIL-M-81594. TDPL: Document Add Delete Substitute MIL-M-81594 -- XX SAE-AS5942 CONTRACTOR FIRST ARTICLE TESTING IS REQUIRED REQUIREMENTS FOR FAT ARE CALLED OUT IN QAP 12932490 AND SQAP014392377 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ IAW BASIC DRAWING NR 19200 12932490 REVISION NR H DTD 01/09/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11655194 REVISION NR J DTD 09/04/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7680606 REVISION NR AB DTD 04/19/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 ATPD-2167 REVISION NR A DTD 09/06/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11655194 REVISION NR K DTD 03/01/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 7641866 REVISION NR R DTD 12/12/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12932490 REVISION NR B DTD 02/21/2002 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12932490 REVISION NR E DTD 04/14/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12932490 REVISION NR DTD 12/17/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 14153 SQAP014392377 REVISION NR DTD 12/06/2017 PART PIECE NUMBER: Solicitation Period: 30 days. Estimated Issue Date: Nov 1, 2018; Estimated Closing Date: Nov 30, 2018. No proposals will be accepted in response to this notice, it is JUST A NOTICE. Please wait for the actual solicitation document. This solicitation will be a Definite Quantity Contract for stock replenishment, which will be awarded in accordance with the policies and procedures outlined in FAR Subpart 13.5 (Test Program for Certain Commercial Item). The Government will make an award, as a result of this solicitation, to the responsible offeror, offering the lowest price, whose offer conforms to all of the terms and conditions set forth in this solicitation. The required delivery schedule for the contract will be 90 days. The contract will be required Inspection and Acceptance at Origin. FOB Origin delivery will be made to the Defense Distribution Depot. Radio Frequency Identification (RFID) will be required. Certified cost and pricing data will not be required per FAR 15.403-1(B)(3); however, the Contracting Officer may require supporting price data. This acquisition is subject to the requirements of the Trade Agreement Act of 1979. All offers shall be in the English language and in U.S. dollars. All proposals must include a hard copy of a completed solicitation with price and delivery data. Follow directions as outlined in the solicitation. Offerors responding to the solicitation must submit their proposal directly to the acquisition specialist. Proposals will not be accepted until after the solicitation has been issued. This agency will consider proposals submitted by all responsible sources. After the solicitation issue date, a copy of this solicitation can be obtained through the DLA Internet Bulletin Board System (DIBBS). Interested parties will be able to obtain and view all required information to respond to the solicitation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-I/SPE8E619Q0006/listing.html)
- Record
- SN05126712-W 20181018/181016230901-a826ef26c62ab4b27c4f7192ae744320 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |