SOLICITATION NOTICE
66 -- FAA National Test Equipment Program (NTEP) Test, Measurement, and Diagnostic Equipment (TMDE)
- Notice Date
- 1/31/2019
- Notice Type
- Synopsis
- NAICS
- 811219
— Other Electronic and Precision Equipment Repair and Maintenance
- Contracting Office
- FEDERAL AVIATION ADMINISTRATION, AAQ-732 AC - Mike Monroney Aeronautical Center (Oklahoma City, OK)
- ZIP Code
- 20591
- Solicitation Number
- 32516
- Response Due
- 3/1/2019
- Archive Date
- 3/1/2019
- Point of Contact
- Stacey Stanley, stacey.stanley@faa.gov, Phone: 405-954-4417
- Small Business Set-Aside
- N/A
- Description
- THIS POSTING IS BEST VIEWED AT, HTTPS://FAACO.FAA.GOV. If you are viewing this announcement through Fed Biz Ops (www.fbo.gov), or any other 3rd party provider, attachments may not be available or viewable to you. The National Test Equipment Support will ensure the calibration of Test, Measurement, and Diagnostic Equipment (TMDE). This requirement includes calibration facilities that are predominantly mobile, with fixed facilities for equipment unable to calibrate on a van. The FAA ™s inventory of TMDE is located at FAA facilities throughout the Continental United States (CONUS) and outside the CONUS (OCONUS). The objective of the National Test Equipment Support Contract is to obtain a broad range of services required by the FAA to support the life cycle management of the TMDE required to maintain NAS systems, facilities, and services. The contract will allow the National Test Equipment Program Manager (NTEPM) and other stakeholders to ensure TMDE is calibrated within the specified interval referenced on the Calibration Cycle Requirements Table (CCRT). This market survey should identify qualified and capable sources that can provide the services described in the attached Statement of Work. Particularly the capability to provide predominately mobile calibration, along with fixed facilities in support of equipment located at CONUS and OCONUS sites. We will not consider any vendor to be responsive if they cannot display these capabilities. The draft Statement of Work (SOW), is provided as an attachment to this market survey to inform and assist interested vendors with regard to the technical work required. However, interested respondents are cautioned that the Government at its discretion may update and or revise this SOW for any potential contract or request for proposal. At this time, the acquisition strategy and nature of competition has not been determined for any potential contract. The Government welcomes statements of interest and capabilities from all businesses, which are capable of providing the required items/services. However, contract performance has historically been performed by a large business. Depending on responses to this survey and analysis of market research collected, the Government may, at its discretion, decide to pursue a full and open competition or set-aside all or part of the procurement. THIS IS NOT A REQUEST FOR PROPOSALS OR OFFERS. A SIR/Request for Offer may be made under a separate announcement in the future. The FAA is not seeking or accepting unsolicited proposals. The FAA will not pay for any information received or costs incurred in preparing vendor responses to this market survey. Therefore any cost associated with a market survey submission is solely at the interested vendor ™s expense. The principle North American Industry Classification System (NAICS) code for this effort is 811219, Other Electronic and Precision Equipment Repair and Maintenance, with a size standard of $20.5 million. The purpose of this announcement is to conduct a market survey to solicit statements of interest and capabilities from interested vendors, in accordance with FAA Acquisition Management System (AMS) Policy 3.2.1.2.1. This market survey will enable the FAA to review responses that are current and will assist with acquisition planning based on current data. The responses to this market survey will be used for informational purposes only. HOW TO RESPOND TO THIS MARKET SURVEY: Interested vendors should submit the items listed below to the point of contact listed at the bottom of this announcement. 1. Capability Statement. This document is limited to not more than fifteen (15) pages and must include a brief description of the services provided by your firm which are same/similar to those services outlined in this market survey and same/similar to the draft SOW attached at the bottom of this survey. Your capability statement should also include your company name, address, point of contact information, contractor size and NAICS code. Below is a listing of elements the Government expects to see in a capability statement for this effort: a. Describe your capabilities and/or plan to provide the tasks and services in the PWS including: i. Mobile Calibration Services: This must show the capability of your company to perform on site calibrations. ii. CONUS and OCONUS support: This must show the capability of your company to perform calibrations at sites that are CONUS and OCONUS as detailed on the attachments to this market survey. iii. Fixed Facilities: This must show that you have relationships and/or have the capability to repair/calibrate equipment that cannot be calibrated through mobile calibration efforts. iv. Ability to calibrate the listed mix of TMDE. b. Describe how you will provide qualified personnel. c. Describe what portions of the contract you would subcontract. If you plan to not subcontract indicate how your company would meet all of the requirements. d. Describe your quality control plan. e. Describe your contract implementation plan. f. Provide examples of past performance and experience during the previous five years in the same/similar field. 2. Questions or Concerns about the SOW and attachments: This document is not limited in pages. This document is to provide the FAA with a better understanding of industry standards and concerns that industry has with the draft SOW. We would like you to address each question below but also encourage any comments in order to ensure a smoother procurement process. Responses to this market survey must be received by 5:00 P.M. CST, March 1, 2019. Please include śMARKET SURVEY RESPONSE: FAA NTEP TMDE Mobile Calibration ť in the subject line of your email. Information provided will not be released but please mark PROPRIETARY on all documents submitted as necessary. NO PHONE CALLS PLEASE. ALL QUESTIONS MUST BE IN WRITING VIA EMAIL TO THE CONTRACTING OFFICER. CONTACT INFORMATION IS PROVIDED BELOW. Submissions should be sent via email to the following point of contact: Stacey.Stanley@faa.gov (405) 954-4417 If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/32516 to view the original announcement. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (31-JAN-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/DOT/FAA/MMACTR/32516/listing.html)
- Record
- SN05207925-F 20190202/190131230009 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |