MODIFICATION
78 -- Gym Equipment
- Notice Date
- 2/20/2019
- Notice Type
- Modification
- Contracting Office
- 5480 Roush Drive, Fort Benning, GA 31905
- ZIP Code
- 22030
- Solicitation Number
- BENNINGNCOICANM0001
- Response Due
- 2/28/2019
- Archive Date
- 8/27/2019
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is BENNINGNCOICANM0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2019-02-28 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Benning, GA 31905 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: PORTABLE SQUAT STAND W/PULL UP BAR (ALTERNATE TO CLIMBING PODS). DESCRIPTION: 1 X PER LANE. SQUAT STAND 92 HEIGHT GIVES YOU AMPLE SPACE FOR PULL-UPS UNDER AN 8-FOOT CEILING WITH ACOMPACT 8"X48 BASE FOOT PRINT, THAT CAN BE EASILY TRANSPORTED OR RELOCATED. SPECIFICATIONS: 1)1.5 INCH OUTSIDE DIAMETER OF BAR. 2)SMOOTH, UNPAINTED, GALVANIZED STEEL BAR. TAPE IS NOT PERMITTED DUE TO HYGIENE CONCERNS. 3)PRODUCT WEIGHT: 146 LBS. 4)HEIGHT: MIN 86". 5)STEEL NOTES: 2X3" 11 GAUGE. 6)OTHER PRODUCT SPECS: WEIGHT CAPACITY TESTED AT 1,000 LBS. 7)SQUAT STANDS: STEEL, PULL-UP BAR. 8)COLOR: N/A. USACIMT PROCUREMENT RECOMMENDATION: 1.5 **OUTSIDE** DIAMETER IS CRITICAL, 2 ARE TOO LARGE FOR SMALL HANDS, 2, EA; LI 002: Decline, Incline, Flat Bench, 33, EA; LI 003: 45lbs bar, 32, EA; LI 004: EZ Curl bar, 6, EA; LI 005: HEXAGON BARBELL (HEXAGON BAR/TRAP-BAR). DESCRIPTION: 1X per LANE. ITS CONFIGURATION LEADS TO A MUCH MORE UPRIGHT TORSO POSITION, ALLOWING THE SOLDIER TO"SIT" INTO THE MOVEMENT WITH FAR FEWER TECHNICAL REQUIREMENTS THAN A TRADITIONAL STRAIGHT BAR DEADLIFT. IDEAL FOR SHRUGS AND DEADLIFTS. SPECIFICATION:1)HEXAGON BAR/TRAP-BAR (NO D-HANDLES). 2)OLYMPIC SIZE. WEIGHT: 60LB (UNLOADED) MUST BE WITHIN 5% OF CLAIMED WEIGH. 3)DURABLE HEXAGONAL FRAME WELDED FROM 1.5 SQUARE STEEL TUBING (1.5"SCH 80 PIPE SLEEVES). 4)16.4 OF LOADABLE SLEEVE LENGTH (TO ACCOMMODATE FOUR EACH 45LB BUMPER PLATES W/COLLAR). 5)BOTH SETS OF KNURLED, PARALLEL HANDLES MEASURE 1.34 IN DIAMETER AND ARE SPACED 25 ON CENTER. 6)HEXAGON BAR REQUIRES RUST PROOFING. EXAMPLES: BLACK OXIDE BARE STEEL; BRIGHT ZINC; BLACK ZINC CHROME; NICKEL; AND PHOSPHOROUS ZINC PLATE TO RESIST RUSTING. 7)REQUIRED TO HAVE A SOLID SLEEVE DESIGN.8)COLOR IS NON-SPECIFIC. USACIMT PROCUREMENT RECOMMENDATION: CHROME PLATED HEXAGON BARBELL HAVE IN OUR LIMITED USE BEEN KNOWN TO RUST DUE TO OUTSIDE USAGE & STORAGE; D-HANDLE HEXAGON BARBELL ARE NOT AUTHORIZED. OLYMPIC/STANDARD STRAIGHT BAR SHOULD NOT BE USED TO PERFORM THE 3 REPETITION MAXIMUM DEADLIFT TEST EVENT. LOADABLE SLEEVE LENGTH MUST BE ABLE TO HOLD X 4 45LB BUMPER PLATES WITH COLLAR. WEIGHT OF BAR SHOULD BE STANDARD 60 LBS EMPTY., 19, EA; LI 006: Foam roller, 480, EA; LI 007: J-hook set, 1, EA; LI 008: 24 inch box jump, 10, EA; LI 009: Speed jump rope (vary lengths), 25, EA; LI 010: NYLON PUSH SLED (WITH PULL STRAP). DESCRIPTION: 1 X PER LANE. THE NYLON SLED CAN BE DRAGGED ON MULTIPLE SURFACES (GRASS AND TURF). THE SLED CAN HANDLE UP TO FOUR 45LB PLATES AND IS CONSIDERABLY LIGHTER THAN THE TRADITIONAL METAL DRAGGING SLED. THE SLED SHOULD NOT BE USED ON CONCRETE, ASPHALT, OR ANY ROUGH TEXTURED SURFACE. USE OF SLED ON AGGRESSIVE SURFACES CONCRETE, ASPHALT, OR ANY ROUGH TEXTURED SURFACE WILL SIGNIFICANTLY SHORTEN THE LIFESPAN OF THE SLED. THE NYLON SLED CAN BE ROLLED UP FOR STORAGE. SPECIFICATIONS: 1) MADE OF THICK HEAVY DUTY NYLON. 2) SIZE STANDARD IS 22 (LENGTH) BY 19.5 (WIDTH). 3) CAN HANDLE UP TO FOUR 45LB PLATES. WEIGHT STANDARD IS 90LBS (2 X 45LB PLATES). 4) MUST INCLUDE PULL 92 STRAP WITH HANDLE ON BOTH ENDS. 5) NYLON SLED COLOR IS NON-SPECIFIC. USACIMT PROCUREMENT RECOMMENDATION: PRESENTLY, METAL SLEDS ARE NOT AUTHORIZED FOR USE IN THE ACFT. NYLON SLED NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (20-FEB-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/efa16656617b5c2728271583e239d7f1)
- Place of Performance
- Address: Fort Benning, GA 31905
- Zip Code: 31905-5000
- Country: US
- Zip Code: 31905-5000
- Record
- SN05227484-F 20190222/190220230040 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |