SOURCES SOUGHT
39 -- Puget Crane Replacement 3071
- Notice Date
- 3/6/2019
- Notice Type
- Synopsis
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- 100 Penn Square East Wanamaker Bldg (RM 643) Philadelphia PA 19107-3390
- ZIP Code
- 19107-3390
- Solicitation Number
- W912BU-3071Puget
- Response Due
- 3/21/2019
- Point of Contact
- Michael J. Hunter, Contract Specialist, Phone 2156566774, - Adriana A. Dunaway, Contracting Officer, Phone 215-656-6895, Fax 215-656-6798
- E-Mail Address
-
michael.hunter@usace.army.mil, adriana.a.dunaway@usace.army.mil
- Small Business Set-Aside
- N/A
- Description
- This is a Sources Sought Notice and is for INFORMATION PURPOSES ONLY. This IS NOT a REQUEST for PROPOSALS, QUOTATIONS, or BIDS. Responses to this request will not be returned. Not responding to this sources sought does not preclude participation in any future and potential solicitation. It is the intent of the Contracting Office to use this information for market research purposes only. The survey is being conducted to determine the interest of industry within NAICS codes # 333120, and establish that there are adequate Large and/or Small Business (HUBZONE 8(a) or Service Disabled Veteran Owned Small Business) contractors for providing a pedestal mounted crane. The Government WILL NOT pay for the provision of any information, nor will it compensate any respondents for the development of any such information. If a formal solicitation is released, it will be via the Federal Business Opportunities (http:www.fbo.gov). The Army Corps of Engineers Marine Design Center intends to procure a new pedestal type knuckle boom marine crane that will be installed on the Motor Vessel Puget for the Seattle District. The new crane is to replace the existing Link Belt HC-218 crane. It will be used for debris removal as well as routine maintenance and construction activities for the navigable channels, navigation locks, and breakwaters within the Puget Sound and surrounding vicinity. The Government is issuing this Request for Information (RFI) to identify the resources available and interested parties to engineer, design, and build a new pedestal crane to mount on the M/V Puget. This RFI is for the supply of the crane and its attachments only. Barge construction and shipyard installation of the crane is outside the scope of the RFI. The fixed crane shall have the following features: • Marine Floating Service • Pedestal Mounted • Knuckle Boom of 70 ft. boom length minimum • Self-contained diesel generator/HPU • 360 degree revolving lift: o 42,000 lbs. at 40 ft. radius o 19,000 lbs. at 70 ft. radius o Out of level limits of at least 5° machine list or trim • Hydraulic coupler at the boom head to allow for the mounting of a grapple or head box for lifting • Grapple rated to handle the revolving weights listed above • Ability to utilize an appropriately sized clamshell • Capability to perform lift operations in winds up to 40 mph • 13 ft. maximum tail swing radius • Maximum overturning moment of 1.2 million ft.-lbs. at maximum radius • The crane shall conform to the following standards: o API 2C with independent 3rd party verification and ABS Certification o EM385-1-1, http://www.usace.army.mil/Safety-and-Occupational-Health/Safety-and-Health-Requirements-Manual/ • Heated/Air Conditioned cab • Heaters for fluids, brakes, and electrical components • Cold weather starting package • Capable of operating in -20 Degrees F • Minimum (4) LED boom lights with power source • Integrated Load Moment Indicator with safety cut outs • Foot pedal actuated swing break Requirements for the response below: All interested business concerns for this requirement shall provide the following information when responding to this RFI: 1. Company name. 2. DUNS number. 3. Type of business concern large business or small business (please identify type of small business). 4. Years in business. 5. Acknowledgement of ability to bond the value of the crane. 6. Statement of capability and qualifications of the organization to perform the requirement. 7. List of similar projects worked on over the past 10 years and services provided on those projects. 8. Datasheet and floating service load chart with the machine list and trim limits identified for the crane(s) that would be offered to meet this requirement. 9. Narrative explaining whether the Offeror would meet the requirements with a crane that is based on a currently available product line platform (i.e. previously manufactured and placed in service). If the Offeror can meet the requirement, however it requires significant engineering and/or modifications, the Offeror shall identify that as well. 10. Statement of lead time necessary for design, fabrication, and delivery after receipt of order. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (06-MAR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/USA/COE/DACA61/W912BU-3071Puget/listing.html)
- Place of Performance
- Address: TBD
- Country: US
- Country: US
- Record
- SN05241510-F 20190308/190306230025 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |