Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 15, 2019 FBO #6321
SOLICITATION NOTICE

34 -- BRAND NAME OR EQUAL CNC MILLING MACHINE

Notice Date

3/13/2019
 

Notice Type

Combine Synopsis/Solicitation
 

NAICS

333517 — Machine Tool Manufacturing
 

Contracting Office

Department of Veterans Affairs;Veterans Benefits Administration;Office of Acquisition;1800 G. Street N.W.;Washington DC 20006
 

ZIP Code

20006
 

Solicitation Number

36C10E19Q0108
 

Response Due

3/28/2019
 

Archive Date

5/27/2019
 

Point of Contact

(612) 970-5621
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation 36C10E19Q0108 is issued as a request for quote (RFQ). The solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular 2019-01, Dated 1/22/2019. The solicitation is set aside 100% for Service-Disabled Veteran-Owned Small Business. The applicable NAICS Code for this solicitation is 333517 and the Small Business Size limitation is 500 Employees. This solicitation is set-aside exclusively for Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns in accordance with Public Law 109-461, Veterans First Program. Only offers from SDVOSB concerns that are registered and verified in the Center for Verification and Evaluation (CVE) Vendor Information Pages (VIP) website at https://www.vip.vetbiz.gov/ at the time date set for receipt of offers shall be considered for award. Offers from SDVOSB concerns that are not registered shall be rejected as non-responsive and shall not be considered for award. This solicitation is issued with the intent of awarding a Firm-Fixed Price Commodity Contract. Many of the Commodity Line Items below are also being solicited using Brand Name or Equal Specifications (FAR 52.211-6). Though a Commodity Requirement, this solicitation also includes two Service Line Items (0011 and 0012). Please provide pricing for following Line Items: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0001 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37752 1100M CNC MILLING MACHINE WITH 18" X 11" X 16.25" TRAVELS. VOLTAGE: SINGLE-PHASE 230 V. 1.00 EA 0002 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38255 AUTOMATIC OILER KIT FOR 1100M. 1.00 KIT 0003 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31945 CALIFORNIA AIR TOOLS 4610S AIR COMPRESSOR 1.00 EA 0004 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31760 WORK STOP. 1.00 EA 0005 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31841 SUPERSOFT JAWS KIT. 1.00 KIT Please provide pricing for following Line Items (continued): ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0006 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31880 STANDARD 5 STEEL STEP JAW SET. 1.00 SET 0007 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38258 TTS SUPERFLY CUTTER KIT. 1.00 KT 0008 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31802 TTS MACHINABLE BLANK. 1.00 EA 0009 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 32431 TTS SAW ARBOR: 1". 1.00 EA 0010 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 32430 TTS SAW ARBOR: 1/2". 1.00 EA 0011 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 35195 TTS ROTARY BROACH KIT. 1.00 KIT 0012 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 32447 TTS DIAMOND DRAG ENGRAVER KIT. 1.00 KIT 0013 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31822 TTS SET SCREW HOLDER: 6MM. 1.00 EA 0014 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31823 TTS SET SCREW HOLDER: 10MM. 1.00 EA 0015 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31824 TTS SET SCREW HOLDER: 12MM. 1.00 EA 0016 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31818 TTS SET SCREW HOLDER: 1/4". 1.00 EA Please provide pricing for following Line Items (continued): ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0017 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31819 TTS SET SCREW HOLDER: 5/16. 1.00 EA 0018 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31820 TTS SET SCREW HOLDER: 3/8. 1.00 EA 0019 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31821 TTS SET SCREW HOLDER: 1/2. 1.00 EA 0020 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31350 SPINDLE SPEEDER. 1.00 EA 0021 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38948 1100M EXTENDED WARRANTY. 1.00 EA 0022 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 33337 G WIZARD MACHINSIT CALCULATOR FOR TORMACH. 1.00 EA 0023 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 35687 AUTODESK FUSION 360 1 YEAR COMMERCIAL LICENSE. 1.00 EA 0024 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 30616 JOG SHUTTLE CONTROLLER. 1.00 EA 0025 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38437 WATERPROOF MINI-KEYBOARD. 1.00 EA 0026 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38722 WATERPROOF MOUSE. 1.00 EA Please provide pricing for following Line Items (continued): ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0027 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 35575 TOUCH SCREEN KIT. 1.00 KIT 0028 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37289 DURAKUT 9000B MIST COOLANT. 1.00 EA 0029 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37294 QUALICHEM XTREME CUT 251C. 1.00 EA 0030 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31386 MACHINE WAY OIL (1 GALLON). 1.00 EA 0031 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37331 1/16 1/2" JOBBER MACHINE DRILL SET. 1.00 SET 0032 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37441 END MILL KIT FOR STEEL #1. 1.00 KIT 0033 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37377 END MILL KIT FOR ALUMINUM #1. 1.00 KIT 0034 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 32291 TTS METRIC TOOL HOLDER SET. 1.00 SET 0035 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 32284 TTS CNC OPERATOR SET WITH TORMACH TOOL ASSISTANT. 1.00 SET 0036 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31759 5 (127 MM) CNC VISE. 1.00 EA Please provide pricing for following Line Items (continued): ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QTY UNIT UNIT PRICE AMOUNT 0037 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31875 ELECTRONIC TOOL SETTER. 1.00 EA 0038 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31858 DIGITIZING PROBE KIT. 1.00 KIT 0039 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38396 FOBUSTER COOLANT KIT (230 VAC) FOR 1100M. 1.00 KIT 0040 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38443 6 TILTING 4TH AXIS KIT FOR 1100M/770M. 1.00 KIT 0041 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38941 AUTOMATIC TOOL CHANGER KIT FOR 1100M (INCLUDES POWER DRAWBAR). 1.00 KIT 0042 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37549 ENCLOSURE KIT. 1.00 KIT 0043 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 31446 LIFTING BAR KIT. 1.00 KIT 0044 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 38791 CONTROLLER ARM. 1.00 EA 0045 (*BRAND NAME OR EQUAL*) BRAND: TORMACH INC.; PART NUMBER: 37325 1100M STAND. 1.00 EA 0046 INSTALLATION/RIGGING SERVICES SERVICES IN ACCORDANCE WITH (IAW) SERVICES NOTED IN SECTION VI. 1.00 LT Description of Requirement The Department of Veterans Affairs has a requirement to provide a CNC (Computer Numerical Control) Milling Machine to a Service Disabled Veteran enrolled in a Vocational Rehabilitation and Employment (VRE) plan. The contractor shall provide all equipment necessary for the end result to be a CNC Milling Machine with all the functions/capabilities, as well as quality, of the TORMACH MILLING MACHINE (Line Item 0001) with all the other equipment Line Items installed. All of the equipment listed in section v. notes a BRAND and PART NUMBER. These are products already found to be Technically Acceptable and are thus the standard for any substitutes (i.e. Brand Name or Equal/FAR 52.211-6). It is understood that any substitute may have the same functions/capabilities cumulatively but may not be reflected in the same number of separate Line Items. Line Item 0046: INSTALLATION/RIGGING SERVICES This line item for Installation/Rigging Services includes the placement of the CNC Milling Machine on the prepared foundation in the Veteran s Workshop located in the Garage of the Veteran s Residence. The Contractor is responsible for the installation of all the various CNC Milling Machine pieces, making all required external connections, and ensuring equipment is working properly. The US Government is responsible for the Foundation, Anchoring of CNC Mill, Power, Air, Water, and any Other Necessary Fluids. The Veteran s driveway is brick pavers and can withstand the weight of any Material Handling Equipment (MHE) that may need to be employed. Delivery Terms: FOB Destination Delivery Address: Davenport, FL 33896. Full address will be provided upon award since this address is a Veteran s Residence. Required Delivery Date (RDD): Request best RDD without incurring an additional expediting fee. FAR 52.212-1, Instructions to Offerors Commercial Items (Oct 2018), applies to this solicitation. The following provisions are added as addenda: 52.204-7 System for Award Management (OCT 2018) 52.204-16 Commercial and Government Entity Code Reporting (JUL 2016) 52.211-6 Brand Name or Equal (AUG 1999) 52.252-1 Solicitation Provisions Incorporated By Reference (FEB 1998) 852.273-74 Award Without Exchanges (JAN 2003) (End of Addendum to 52.212-1) Submission of Offers: Offers are due no later than March 28, 2019 by 1:00 PM EST. Offers shall be submitted electronically to robert.mulheran@va.gov. The email subject line must contain the following: Quote in Response to 36C10E19Q0108, CNC Milling Machine. Offers shall be based on the requirements of the solicitation, and must contain the following: Company name, address, DUNS Number, tax identification number (TIN), and point of contact with phone number, and e-mail address. A completed price schedule in the format as provided in Section v ; Acknowledgement of any/all amendments; Solicitation Questions: Questions shall be submitted to the Contracting Officer in writing via e-mail to robert.mulheran@va.gov. Oral questions are not acceptable due to the possibility of misunderstanding or misinterpretation. The cut-off date and time for receipt of questions is March 20, 2019 @ 1:00 PM EST. Questions received after this date and time may not be answered. Questions will be answered in a formal amendment to the solicitation so all interested parties can see the answers. Amendments: Amendments to this solicitation will be posted at http://www.fedbizopps.gov (FBO). Paper copies of the amendments will NOT be individually mailed. By registering to receive notifications on FBO, offerors will be notified by email of any new amendments that have been issued. No other notification of amendments will be provided. Potential Offerors are advised that they are responsible for obtaining and acknowledging any amendments to the solicitation. Failure to acknowledge an amendment may result in your offer being considered unacceptable. QUOTE REQUIREMENTS At a minimum, each Contractor is required to submit a quote for all line items noted in section v. If the equipment being quoted is a substitute and you feel the Line Item doesn t apply, simply quote $0.00 for that Line Item and state which quoted Line Item reflects the equivalent function/capability. SUBSTITUTES. Any substitutes to those Brands/Part Numbers noted in Section v. must include all necessary Technical Documents necessary to show that the substituted equipment has the same Capabilities, Functions, and Quality as those Brands/Part Numbers noted in Section v. Submitted quotes should be valid for a minimum of 60 Days. FAR 52.212-2, Evaluation-Commercial Items (OCT 2014) applies to this solicitation. The following details the Basis for Award and the applicable Evaluation Criteria. Basis for Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical capability of the item offered to meet the Government requirement. Acceptable: The quoted equipment either exactly matches the noted Brands/Part Numbers in section v. OR any substitute meets ALL the following minimum specifications: CNC Milling Machine Power Source: 230 V, Single Phase. CNC Milling Machine with a minimum of a 12-tool automatic tool changer. CNC Milling Machine minimum Table size of 34 X 9.5. CNC Milling Machine has 4th Axis functionality. CNC Milling Machine minimum Travel distances: X Axis: 18.0, Y Axis: 11.0, and Z Axis: 16.25. CNC Milling Machine has all the equivalent associated Tooling Kits noted in Section V. Unacceptable. Any quote that isn t found to be Acceptable per the minimum specifications noted above (1.1 Acceptable). Offers the lowest reasonable and balanced price. The Government will evaluate each offeror's proposed prices submitted in completed RFQ for reasonableness and balance as discussed in the following paragraphs 2.1.1 and 2.1.2. Offerors are advised to review all data items and ensure that they are proposing to the specific data requirements and level of effort involved. Reasonableness: The existence of adequate price competition is expected to support a determination of reasonableness. Price analysis techniques may be used to validate price reasonableness. If adequate price competition is not obtained and/or if price reasonableness cannot be determined using price analysis of Government obtained information, additional information may be required to support the proposed price. Balance: Unbalanced pricing exists when, despite an acceptable price, the price of one or more contract line items is significantly overstated or understated as indicated by the application of proposal analysis techniques. The Government will analyze the proposed prices to determine whether there are unbalanced separately priced line items. Prices submitted will be compared and evaluated to assure that a logical progression exists as related to price and quantity changes within each offeror s response to the pricing structure in the Schedule. Offerors are cautioned against submitting an offer that contains unbalanced pricing; offers that are determined to be unbalanced may be rejected if the lack of balance poses an unacceptable risk to the Government. FAR 52.212-3, Offeror Representations and Certifications Commercial Items (OCT 2018) applies to this solicitation. The offeror has completed the annual representations and certifications electronically via the SAM website access through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. FAR 52.212-4, Contract Terms and Conditions Commercial Items (OCT 2018) applies to this solicitation. The following clauses are added as addenda: 52.204-13 System for Award Management Maintenance (OCT 2018) 52.204-18 Commercial and Government Entity Code Maintenance (JUL 2016) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) 52.252-2 Clauses Incorporated by Reference (FEB 1998) 852.203-70 Commercial Advertising (MAY 2008) 852.219-10 VA Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (JUL 2016)(DEVIATION) 852.219-74 Limitations on Subcontracting Monitoring and Compliance (JUL 2018) 852.232-72 Electronic Submission of Payment Requests (Nov 2018) 852.246-71 Rejected Goods (OCT 2018) (End of Addendum to 52.212-4) 52.212-5, Terms and Conditions Required to Implement Executive Orders Commercial Items (JAN 2019), applies to this solicitation. The following provisions and clauses are selected as appropriate to this solicitation: Paragraph b clauses applicable: (4) 52.204-10 Reporting Executive Compensation and First Tier Subcontract Awards (OCT 2018) (8) 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (OCT 2015) (22) 52.219-28 Post-Award Small Business Program Representation (JUL 2013) (25) 52.222-3 Convict Labor (JUNE 2003) (26) 52.222-19 Child Labor--Cooperation with Authorities and Remedies (JAN 2018) (27) 52.222-21 Prohibition of Segregated Facilities (APR 2015) (28) 52.222-26 Equal Opportunity (SEP 2016) (30) 52.222-36 Equal Opportunity for Workers with Disabilities (JUL 2014) (33) 52.222-50 Combating Trafficking in Persons (JAN 2019) (42) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (47) 52.225-3 Buy American--Free Trade Agreements--Israeli Trade Act (MAY 2014) (49) 52.225-13 Restrictions on Certain Foreign Purchases (JUNE 2008) (55) 52.232-33 Payment by Electronic Funds Transfer--System for Award Management (OCT 2018) Paragraph c clauses applicable: (2) 52.222-41 Service Contract Labor Standards (MAY 2014) (3) 52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2014) Employee Class Monetary Wage Fringe Benefits 30084 Engineering Technician IV GS-7 (8) 52.222-55 Minimum Wages Under Executive Order 13658 (DEC 2015) (9) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332. This Statement is for Information Only: It is not a Wage Determination Service Contract Labor Standards (01/01/2019): Wage Determination No.: 2015-4541, Revision No.: 7, Date Of Revision: 12/26/2018, Additional Contract Requirements or terms and conditions: Wage Determination 2015-4541 (Rev.7) is incorporated into this contract by reference and can be found at the following link: https://www.wdol.gov/wdol/scafiles/std/15-4541.txt?v=7 Defense Priorities and Allocations Systems and assigned rating: N/A Offers are due no later than March 28, 2019 by 1:00 PM EST. Offers shall be submitted electronically to email address Robert.Mulheran@va.gov. Only written quotes shall be acceptable and must be received and identified by solicitation #36C10E19Q0108. Vendors bear the burden of ensuring that quotes, and any applicable amendments, are emailed on time. All pages of the quote must be emailed before the deadline specified in this solicitation. Failure to provide any of this information or providing inadequate or unclear information will result in the quote being rated unsatisfactory and ineligible for award. The vendor must be active in the System for Award Management (SAM), and all SDVOSB must be certified by the Center for Veterans Enterprise (CVE) at www.vetbiz.gov, to be eligible to participate and to receive an award. For additional information, please contact the Contracting Officer, Robert Mulheran at (612) 970-5621, or via e-mail to Robert.Mulheran@va.gov. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (13-MAR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
 

Web Link

Link To Document
(https://www.fbo.gov/spg/VA/WDCVARO372/WDCVARO372/36C10E19Q0108/listing.html)
 

Place of Performance

Address: (* Veteran's Residential Address *);(* Exact Address Provided Upon Award *);Davenport, FL

Zip Code: 33896

Country: USA
 

Record

SN05248902-F 20190315/190313230110 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |