SOURCES SOUGHT
C -- A-E IDIQ for Mechanical, Electrical, and Plumbing services, Naval Facilities Engineering Command Southwest
- Notice Date
- 4/2/2019
- Notice Type
- Synopsis
- NAICS
- 541330
— Engineering Services
- Contracting Office
- N62473 NAVFAC SOUTHWEST, CAPITAL IMPROVEMENT CONTRACTS, NAVY 1220 Pacific Highway San Diego, CA
- ZIP Code
- 92132
- Solicitation Number
- N6247319RMEPS
- Response Due
- 4/17/2019
- Archive Date
- 5/2/2019
- Point of Contact
- Alternate Point of Contact is Betty Kimes betty.kimes@navy.mil
- Small Business Set-Aside
- N/A
- Description
- This is a Sources Sought Synopsis announcement, a market survey for information to be used for preliminary planning purposes. The information received will be used within the Navy to facilitate the decision making process and will not be disclosed outside of the agency. The intent of this Sources Sought Synopsis is to identify potential qualified Small Businesses, U.S. Small Business Administration (SBA) certified 8(a) Businesses, SBA certified HUBZone Small Businesses, Woman-Owned Small Businesses (WOSB) and/or Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The Sources Sought Synopsis is one facet in the Government s overall market research in regards to whether the proposed solicitation will be issued as a competitive set-aside or as full and open (unrestricted). No procurement strategy will be determined based solely on the information received in response to this Sources Sought Synopsis. No reimbursement will be made for any costs associated with providing information in response to this announcement or any follow-up information requests. This notice does not constitute a Request for Proposal and is not to be construed as a commitment by the Government for any purpose other than market research. Respondents will not be notified of the results of the market research. Naval Facilities Engineering Command Southwest(NAVFAC SW) is seeking Small Business, SBA certified 8(a), SBA certified HUBZone, WOSB and/or SDVOSB sources with current relevant experience, personnel, and capability to perform the Architect-Engineer (A-E) services required for a firm fixed price Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for Mechanical, Electrical, and Plumbing Services at various Navy and Marine Corps Installations in California, Arizona, Nevada, Colorado, New Mexico, and Utah but may include work worldwide. The preponderance of work will be in Southern California. The goal of this announcement is to obtain information on available A-E firms who can provide Mechanical, Electrical, and Plumbing services similar to those anticipated under this contract. Primary A-E services required: Preparation of Requests for Proposals (RFP) for Design Build (DB) projects; Design-Bid-Build (DBB) construction contract packages (i.e., full plans and specifications); Mechanical/Electrical Site Investigations, Studies, Surveys, and Reports. Secondary A-E services required: Cost estimates; construction contract support services (CCSS) or post construction award services (PCAS); Fire Protection Engineering Designs, Studies, Surveys and Site Investigation (e.g. fire risk/hazard analysis, life safety code analysis, fire modeling and engineering documentation, antiterrorism, and final inspections and tests of installed Fire Protection Systems. Fire Protection surveys shall be conducted within the guidelines established by OPNAVINST 11320.23G. Support A-E services which may be required: Technical reviews of government-prepared RFP for DB projects and/or full plans and specifications for DBB projects; preparation of planning and programming support documents (such as DD1391 documents); incidental architectural, civil, structural, geotechnical, and environmental work; identification and abatement methods for existing asbestos-containing materials, lead-based paint, and other hazardous materials. Types of projects that are similar in scope include: sustainable energy documentation (e.g. Energy Master Planning, Commissioning, Life Cycle Cost, LEED/Third Party Certifications, Title 24 Energy Compliance documents, ASHRAE 90.1 compliance documents, and ASHRAE 90.1 Performance Rating Method reports); new construction, major repair/renovation of: onsite power generating systems (e.g. solar, cogeneration); control systems (e.g. microgrid, utility control systems); heating, ventilation, air conditioning and control systems (e.g. exhaust systems, direct digital control schematic and architecture); energy supply and distribution systems (e.g. above and below ground steam distribution, medical gas, high temperature/pressure water, refrigeration systems, and natural gas including earthquake shut off valves); plumbing systems; interior and exterior electrical power systems (e.g. interior building power, medium and low voltage distribution systems, primary and secondary substations, Uninterruptable Power Supply (UPS), emergency generators); communication and security systems (e.g. cable TV, electronic security systems); fire protection systems (e.g. fire sprinklers, fire alarm and detection systems, fire alarms and fire resistant building assemblies); and lighting systems for airfield, operational and training, commercial, institutional, industrial, research development, quality of life facilities, etc. The North American Industry Classification System (NAICS) Code is 541330 (Engineering Services) with a Small Business Size Standard of $15,000,000. The proposed contract will be for a total performance period of five years. The estimated total contract price is $30,000,000. The minimum value of individual task orders executed under this contract is $100,000. The maximum value of individual task orders executed under this contract is $2,000,000. Interested Small Business, SBA certified 8(a), SBA certified HUBZone, WOSB and/or SDVOSB sources are invited to respond to this sources sought announcement by completing the following sections of the SF330 Architect-Engineer Qualifications in the following manner: Part I Contract Specific Qualifications: Note: In sections where recent experience is requested, all experience will be evaluated for market research purposes only. Firms are advised that while experience older than five years may demonstrate capability to perform the scope of work, it may not indicate that the firm could be competitive during a future solicitation where only the most recent five years of experience will be accepted. NAVFAC SW may make an acquisition strategy determination based on the likelihood that a sufficient pool of qualified contractors will be competitive on a future solicitation. Complete Section A Contract Information. Complete Section B A-E Point of Contact. In addition to the name of the firm in Block 5, provide your firm s Dun and Bradstreet Number (DUNS) and state if your firm is SBA certified 8(a), SBA Certified HUBZone, SDVOSB, WOSB and/or Small Business (identify all that apply). A set-aside cannot be reasonably determined without size and socio-economic designations. Section E Resumes: Provide a maximum of five (5) resumes for key personnel that would be responsible for completing the required services. At a minimum, provided one (1) professionally registered Mechanical Engineer, one (1) professionally registered Electrical Engineer, and one (1) professional registered Fire Protection Engineer. The Electrical Engineer and Mechanical Engineer shall be on the staff of the Prime A-E firm. All three (3) personnel must be a professionally registered engineer. All key personnel must include the state where the registration was issued (if applicable), registration number, expiration date of registration, and geographic office location for each proposed key personnel member. Each resume must include a maximum of five (5) specific, recently completed projects that best illustrate the individual member s qualifications in performing the listed A-E services. For each project, the individual must describe how significant his/her role and responsibilities were in the services, specific services performed by the individual, and provide the completion date (month and year) of the services. A specific project is a single project or a single task order under an indefinite quantity contract or on-call type contract. Recent is defined as professional A-E services completed within the past seven years prior to April 2, 2019. Completion date is defined as 100% of the required documents are completed and submitted. Projects not meeting these requirements may not be considered. Section H Additional Information: On a maximum of three (3) pages, list a maximum of ten (10) specific, recently completed projects that demonstrate the overall team experience in the required A-E services. At a minimum, each project description shall include the project title, cost, completion date (month and year) and how each project reflects experience in the required primary and secondary services. Include the A-E fee for the services performed. For the purposes of this evaluation, relevant projects are further defined as types of projects specified in this solicitation, with an A-E fee of $100,000 or greater. Include the following: - A minimum of one (1) project shall demonstrate relevant experience with projects having professional fees of $500,000 or greater. - A minimum of one (1) project shall demonstrate relevant self-performed experience with the preparation of a Request for Proposal for Design-Build for the renovation/repair of an existing HVAC system. - A minimum of one (1) project shall demonstrate relevant self-performed Design-Bid-Build experience (i.e. full plans and specs, not just PCAS services) of a mechanical system. - A minimum of one (1) project shall demonstrate relevant experience with the preparation of a Request for Proposal for Design-Build or with the design (i.e. full plans and specs, not just PCAS services) for each of the following: Exterior electrical power system with a minimum of 15kV (i.e., overhead and underground distribution systems, primary and secondary substations, emergency generators, etc.) Fire protection system and life safety features for a facility. Note: A single project may satisfy more than one of the above minimum requirements. A specific project is a single project or a single task order under an indefinite quantity contract or on-call type contract. Self-performed is defined as performing relevant architectural-engineering work in-house without subconsultants/subcontractors. Relevant work is that which is the same or similar to the primary services that may be ordered under this contract. Recent is defined as professional A-E services completed within the past seven years prior to April 2, 2019. Completion date is defined as 100% of the required documents are completed and submitted. Projects not meeting these requirements may not be considered. Section H Additional Information: On a maximum of one page, provide two brief paragraphs, one addressing Location and one addressing Capacity. Entitle the first paragraph Location and within that paragraph indicate the location of the firm s main office and branch offices, and describe the team s knowledge of and availability to work in the proposed geographical area, and the ability of the firm to ensure timely response to requests for onsite support at military installations within the NAVFAC Southwest AOR and at NAVFAC Southwest offices in San Diego, CA. Entitle the second paragraph Capacity and within the paragraph indicate the number of employees within the prime A-E firm responsible for providing Mechanical, Electrical, and Plumbing services, and address the firm s capacity to accomplish multiple task orders simultaneously. The firm shall list all the professionally registered Mechanical, Electrical, and Fire Protection Engineering personnel who will be involved in providing the required services. The Offeror/Contractor must demonstrate adequate in-house staffing capacity to self-perform at least 50 percent of the cost of the contract as required by FAR clauses pertaining to Limitation on Subcontracting. Section I Authorized Representative: Ensure the authorized representative of the firm signs the page attesting to the information provided in the sources sought response. Part II General Qualifications: Complete SF330 Part II General Qualifications for the Prime A-E Firm responding to this Sources Sought Notice. Responses to this Sources Sought announcement are due no later than 11:00 AM on April 17, 2019. Please address your response to Naval Facilities Engineering Command Southwest, Attn: Easter Christopher, Code CINAV.EC, 1220 Pacific Highway, San Diego, CA 92132-5190 OR email your response, in a PDF format, to easter.christopher@navy.mil. Facsimile submittals will not be accepted. All NAVFAC Southwest solicitations are posted on the Navy Electronic Commerce Online (NECO) website at https://www.neco.navy.mil and the Federal Business Opportunities (FBO) website at https://www.fbo.gov/ and begin with N62473. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (02-APR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/66ffec90ae505143197bf67d60699e03)
- Place of Performance
- Address: 1220 Pacific Hwy., San Diego, CA
- Zip Code: 92132
- Country: US
- Zip Code: 92132
- Record
- SN05267850-F 20190404/190402230023 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |