SOLICITATION NOTICE
38 -- Snow Plow Cutting EdgeS / Broom Core
- Notice Date
- 4/9/2019
- Notice Type
- Combine Synopsis/Solicitation
- Contracting Office
- BLDG 20240 Annaconda Road, Fort Drum, NY 13602
- ZIP Code
- 22030
- Solicitation Number
- DRUMAFSBnKER0003
- Response Due
- 4/26/2019
- Archive Date
- 10/23/2019
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is DRUMAFSBnKER0003 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-04-26 17:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Drum, NY 13602 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Plow Shoe Part Number S24/CSC24 cast iron Or equal; Frink Reversible Cast Moldboard Shoe, Compatible with 8 Center-punched Blades with 8 Centers. Uses 5/8 Carriage Bolts, 50, EA; LI 002: OST Underbelly blade Part Number GB 3/4x6x72 Or equal; Demission shall be in Thick, 6 in Height, and 72 in Length minimum; Punch Pattern: Hole 5/8 inch Counter Sunk, Line 1-5/8 +/- in (from top of blade down), First hole 3 in +/- in off center, Second hole 3in (from first hole) or 6in from edge +/- in, Center holes 12in off center from second hole, 40, EA; LI 003: Cutting edge Part Number CE 1/2x8x148 Or equal; Demission shall be 1/2 inch thick by 8 inch height by 148 inch length 5/8 inch hole, Punch Pattern shall be Gauge Line 4 inch (Center Punch from top of blade down)First Hole is 2-1/2 +/- in Off Center Next holes are 8 inch off center of the first hole, 19 hole total shall be steel blade, 10, EA; LI 004: Wire Wafer Part Number 05-191460-WWA Or equal; Wire broom section, heavily filled, 46 inch outside diameter, 19 inch -0+1/16 inch inside diameter with four 5/16th inch thick drive pins protruding 7/16th inch from ring and 15 inch apart center to center, Each brush ring shall be make of premium grade 18 gauge coil steel,.045 inches thick minimum, and shall be a solid continuous ring with no break in the steel ring, Each ring shall be filled with wire that is.018 inch diameter -0+.002, minimum, high carbon galvanized steel with 3 crimps per inch minimum, and a crimp amplitude of 3/32 inch-1/8 inch minimum. Tensile strength shall be 340,000-350,000 p.s.i. before crimping. The.018 inch wire minimum, shall be held secure in the ring by six wraps of 0.91 inch minimum diameter wire, Each brush ring shall be pressed closed every 1 inch +/- 1/8 inch minimum, complete brush section shall be 13 pounds +/- 3% minimum, brushes shall be complete with 1 3/16th inch thick, 19.5 inch (-0+1/16th inch) inside diameter metal spacers minimum., 1800, EA; LI 005: Poly Wafer Part Number 05-191460-PWA Or equal;Ploy wafer section heavily filled 46 inch outside diameter, 19 inch +1/16th inch/-0 inside diameter with four 5/16th inch thick drive pins protruding 7/16th inch from ring and 15 inch apart center to center minimum, brush ring shall be make of premium grade 18 gauge coil steel,.045 inches thick minimum, and shall be a solid continuous ring with no. Each ring shall be filled with.070x x.100 oval shaped crimped virgin polypropylene bristles with tensile strength of 35,000 p.s.i. minimum, The.70 X.100 virgin poly shall be held secure in the ring by eight wraps minimum, of.081 diameter minimum, Each brush ring shall be pressed closed ever 1 inch +/- 1/8th of an inch to maximum strength minimum, shall be lined with a rubber liner. Bristle holding wire tension shall be maintained by deforming an elongated cylindrical shaped clip, retaining the wire, under high tension, to ensure against bristle loss. shall be 8 pounds +/- 5% minimum, shall be complete with 1 3/16th inch thick, 19.5 inch (-0+1/16th inch) inside diameter grade 18 gauge.045 minimum shall have thick coil steel spacers, 1100, EA; LI 006: Spacer Part Number 05-Spacer-1912 or equal; 19.5 inches, +0.063, -0.0 inch inside diameter; 18 gage (0.048 inches thick) cold rolled steel; 2.12 inches wide prior to forming; 1.45 inches wide after forming; spot welded overlap end seam, 1.875=/-3/16 inches., 2600, EA; LI 007: Cutting edge Part Number CE 1/2x8x100 Or equal; Demission shall be 1/2 inch thick by 8 inch height by 100 inch length 5/8 inch hole, Punch Pattern shall be Gauge Line 4 inch (Center Punch from top of blade down)First Hole is 6-1/2 +/- in Off Center Next holes are 8 inch off center of the first hole, shall be steel blade, 12 Hole Total, 5, EA; LI 008: Cutting edge Part Number Carbide-3 Or equal; Demission shall be 3/4 inch thick by 6 inch height by 36 inch length 5/8 inch hole, Punch Pattern shall be Gauge Line 2 inch (from top of blade down)First Hole is 3 inch +/- in Off Center Second hole 3in (from first hole) or 6in from edge +/- in are 12 inch off center of the second hole, 5 hole total, shall be steel blade, 10, EA; LI 009: Cutting edge Part Number Carbide-4 Or equal; Demission shall be 3/4 inch thick by 6 inch height by 48 inch length 5/8 inch hole, Punch Pattern shall be Gauge Line 2 inch (from top of blade down)First Hole is 3 inch +/- in Off Center, Second hole 3in (from first hole) or 6in from edge +/- in next hole are 12 inch off center of the second hole, 6 hole total, shall be steel blade, 5, EA; LI 010: Plow Shoe Part Number OST-FD800L Steel Or equal;, 15, EA; LI 011: Plow Shoe Part Number OST-FR800R Steel Or equal;, 15, EA; LI 012: Carriage Bolt 5/8-11X2 J429 GR 8. Diameter: 0.625 Inch s (5/8), Thread Pitch: 11, Length: 2.000 Inch s (2 ), Grade: GR 8, Finish: Plain Finish., 500, EA; LI 013: Carriage Bolt 5/8-11X 2 Inch, J429 GR 8. Diameter: 0.625 Inch s (5/8), Thread Pitch: 11, Length: 2.500 Inch s (2 ), Grade: GR 8, Finish: Plain Finish., 200, EA; LI 014: : Flange Lock Nut, 5/8-11 GR G. Diameter: 0.625 Inch s (5/8), Thread Pitch: 11, Grade: GR G, Finish: Phos & Oil., 500, EA; LI 015: Cutting edge Part Number RHCE-112X10X15FT Or equal; Rubber Cutting Edge, CHE 1-1/2X10IN.X15FT., 2, EA; LI 016: Ramp Hog Shoe Part Number OST-WAU-33LR, CHE Ramp Hog Shoe, 6, EA; LI 017: Ramp Hog Shoe Part Number RHSV CHE Viking Ramp Hog Shoe, 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (09-APR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/527bd86e9d593d75785c19567c30edf3)
- Place of Performance
- Address: Fort Drum, NY 13602
- Zip Code: 13602
- Country: US
- Zip Code: 13602
- Record
- SN05276076-F 20190411/190409230046 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |