MODIFICATION
Z -- Mt. Elbert Rehabilitation, Unit #1 & Unit #2 Shaft Seal Replacemen
- Notice Date
- 4/10/2019
- Notice Type
- Modification
- NAICS
- 333611
— Turbine and Turbine Generator Set Units Manufacturing
- Contracting Office
- Denver Federal Center Building 67, Room 380 Denver CO 80225
- ZIP Code
- 80225
- Solicitation Number
- 140R6019R0004
- Response Due
- 5/3/2019
- Archive Date
- 6/19/2019
- Point of Contact
- Jeremy Gillespie, Contract Specialist, Phone (406) 247-7817
- E-Mail Address
-
jgillespie@usbr.gov
- Small Business Set-Aside
- N/A
- Description
- See Attachment for Full Text. The principal components of work to be performed under these specifications include the following: A. Design, provide, test and commission replacement of existing shaft seals with mechanical shaft seals for Pump Generator Units 1 and 2 in the Mt. Elbert Pump Generating Plant. B. Remove and dispose of existing Unit 1 packing box, Unit 2 mechanical seal, and associated hardware. C. Provide mechanical seals for both Units 1 and 2: 1. Design the mechanical seal to accommodate the same seal elements across both units. 2. Design the mechanical seal to attach to each unit¿s unique headcover. D. Design and supply shaft sleeves for Unit 1 and Unit 2, if needed for selected method. Sleeve may not be designed and supplied if mechanical seal rotating equipment can be installed directly onto shaft. The principal components of work to be performed under these specifications include the following: Provide and/or manufacture, test and commission replacement of existing shaft seals with mechanical shaft seals for Pump Generator Units 1 and 2 in the Mt. Elbert Pumped Storage Powerplant. Remove and dispose of existing Unit 1 packing box, Unit 2 mechanical seal, and associated hardware. ¿ Provide and/or manufacture mechanical seals for both Units 1 and 2: o Provide and/or manufacture the mechanical seal to accommodate the same seal elements across both units. o Provide and/or manufacture the mechanical seal to attach to each unit¿s unique headcover. Provide and install shaft sleeves for Unit 1 and Unit 2, if needed for selected method. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (10-APR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/47ccb66ffc5d927cd95551cbf8564008)
- Record
- SN05277849-F 20190412/190410230058 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |