SOURCES SOUGHT
66 -- Stryker-SPS Surgical Instruments
- Notice Date
- 4/23/2019
- Notice Type
- Synopsis
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- Department of Veterans Affairs;Network Contracting Office 22;4811 Airport Plaza Drive;Suite 600;Long Beach CA 90815
- ZIP Code
- 90815
- Solicitation Number
- 36C26219Q0632
- Response Due
- 4/26/2019
- Archive Date
- 5/26/2019
- Point of Contact
- latricia.williams2@va.gov
- Small Business Set-Aside
- N/A
- Description
- THIS REQUEST FOR INFORMATION (RFI) 36C26219Q0632-IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT DESCRIPTION This is NOT a solicitation announcement. This is a source sought/RFI only. The purpose of this source sought/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1000 Employees). Responses to this source sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this source sought, a solicitation announcement may be published. Responses to this source sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Network Contracting Office, is seeking sources that can provide Surgical Instruments that at a minimum meets the following salient characteristics with brand name for the VA Loma Linda Healthcare System: 1806-9901 1 T2 Basic Long Instrument Kit (includes all items listed below) 1806-0022 GUIDE WIRE RULER 1806-0032 T2 AWL PLUG 1806-0041 AWL CURVED 1806-0110 UNIVERSAL ROD 1806-0125 REDUCTION SPOON 1806-0130 WRENCH 8mm / 10mm 1806-0135 INSERTION WRENCH 10mm 1806-0150 STRIKE PLATE 1806-0170 SLOTTED HAMMER 1806-0185 TISSUE PROTECTION SLEEVE LONG 1806-0203 3.5MM SCREWDRIVER SELF-HOLDING EXTRA SHORT 1806-0215 DRILL SLEEVE LONG 1806-0227 SCREWDRIVER SHAFT AO LONG 1806-0233 3.5MM SCREWDRIVER SELF-HOLDING LONG 1806-0268 T2 SCREWDRIVER SHAFT COMP. 1806-0271 GUIDE WIRE PUSHER 1806-0315 TROCAR LONG 1806-0325 SCREW GAUGE LONG 1806-0331 T2 X-LONG SCREW MEASUR. GAUGE 1806-0350 T2 EXTRACTION ROD CONICAL 1806-0365 SCREW SCALE LONG 1806-1095 SHAFT COMPLETE FOR 1806-1095 1806-1096 02-3 5MM GUIDE WIRE HANDLE CHUCK 1806-2014 RIGID REAMER 1806-9900 T2 Basic Long Instrument Tray 702429 TEARDROP HANDLE AO COUPLING 703165 ANT / RET FEMORAL DRILL GUIDE 1 SE 0225-6025 2 0225-6025 MINI TRAUMA KIT EQUIPPED O 18INCLUDES ALL ITEMS LISTED BELOW Cat # Item Description 0225-6020 REAMER RACK 09-18 0225-6045 METAL TRAY SMALL 0226-3090 MODULAR REAMER HEAD 9mm 0226-3095 MODULAR REAMER HEAD 9.5mm 0226-3100 MODULAR REAMER HEAD 10mm 0226-3105 MODULAR REAMER HEAD 10.5mm 0226-3110 MODULAR REAMER HEAD limm 0226-3115 MODULAR REAMER HEAD 11.5mm 0226-3120 MODULAR REAMER HEAD 12mm 0226-3125 MODULAR REAMER HEAD 12.5mm 0226-3130 MODULAR REAMER HEAD 13mm 0226-3135 MODULAR REAMER HEAD 13.5mm 0226-3140 MODULAR REAMER HEAD 14mm 0226-3145 MODULAR REAMER HEAD 14.5mm 0226-3150 MODULAR REAMER HEAD 15mm 0226-3155 MODULAR REAMER HEAD 15.5mm 0226-3160 MODULAR REAMER HEAD 16mm 0226-3165 MODULAR REAMER HEAD 16.5mm 0226-3170 MODULAR REAMER HEAD 17mm 0226-3175 MODULAR REAMER HEAD 17.5mm 0226-3180 MODULAR REAMER HEAD 18mm 1 SE 0227-3000S 3 0227-3000S STERILE MODIFIED HALL MODULAR SHAFT 450mm 1 EA 1320-6100 4 1320-6100 GAMMA 3 INSTRUMENT TRAY BASIC - COMPLETE (Includes all items below) 1320-0011 ONE STEP CONICAL REAMER 1320-0026 MULTIHOLE TROCAR SHORT 1320-0031 CONICAL REAMER SLEEVE SHORT 1320-0065 SCREWDRIVER 8mm BALL-TIP T-HANDLE 1320-0066 SPREADING TIP SCREWDRIVER 1320-0090 NAIL HOLDING SCREW 1320-0111 TARGET DEVICE GAMMA3 (THREADED POST) 1320-0130 LAG SCREW GUIDE SLEEVE 1320-0140 DRILL GUIDE SLEEVE 4.2mm FOR LAG SCREW 1320-0150 K-WIRE SLEEVE 1320-0180 LAG SCREW RULER 1320-0191 LAG SCREW STEP DRILL GAMMA3 Ø10.5X495 MM 1320-0200 LAG SCREW DRIVER 1320-0215 NEW DRILL SLEEVE LONG 1320-0233 SET SCREWDRIVER FLEXIBLE SHAFT 1320-0315 NEW TROCAR LONG 1320-1118 SPEEDLOCK SLEEVE 180 1320-3010 ONE SHOT DEVICE GAMMA3 1320-9100 GAMMA 3 INSTRUMENT TRAY BASIC - EMPTY 1806-0041 AWL CURVED 1806-0185 TISSUE PROTECTION SLEEVE LONG 1806-0233 3.5MM SCREWDRIVER SELF-HOLDING LONG 1806-0325 SCREW GAUGE LONG 1806-0365 SCREW SCALE LONG 1806-0480 SCREW GAUGE 1806-1095 SHAFT COMPLETE FOR 1806-1095 1806-1096 02-3 5MM GUIDE WIRE HANDLE CHUCK 702628 ASNIS III 6.5/8.0 ELASTOSIL T-HANDLE WITH LG AO 1 SE 1320-0011 5 GAMMA 3 INSTRUMENT TRAY BASIC - COMPLETE Includes all items below) 1320-0011 ONE STEP CONICAL REAMER 1320-0026 MULTIHOLE TROCAR SHORT 1320-0031 CONICAL REAMER SLEEVE SHORT 1320-0065 SCREWDRIVER 8mm BALL-TIP T-HANDLE 1320-0066 SPREADING TIP SCREWDRIVER 1320-0090 NAIL HOLDING SCREW 1320-0111 TARGET DEVICE GAMMA3 (THREADED POST) 1320-0130 LAG SCREW GUIDE SLEEVE 1320-0140 DRILL GUIDE SLEEVE 4.2mm FOR LAG SCREW 1320-0150 K-WIRE SLEEVE 1320-0180 LAG SCREW RULER 1320-0191 LAG SCREW STEP DRILL GAMMA3 Ø10.5X495 MM 1320-0200 LAG SCREW DRIVER 1320-0215 NEW DRILL SLEEVE LONG 1320-0233 SET SCREWDRIVER FLEXIBLE SHAFT 1320-0315 NEW TROCAR LONG 1320-1118 SPEEDLOCK SLEEVE 180 1320-3010 ONE SHOT DEVICE GAMMA3 1320-9100 GAMMA 3 INSTRUMENT TRAY BASIC - EMPTY 1806-0041 AWL CURVED 1806-0185 TISSUE PROTECTION SLEEVE LONG 1806-0233 3.5MM SCREWDRIVER SELF-HOLDING LONG 1806-0325 SCREW GAUGE LONG 1806-0365 SCREW SCALE LONG 1806-0480 SCREW GAUGE 1806-1095 SHAFT COMPLETE FOR 1806-1095 1806-1096 02-3 5MM GUIDE WIRE HANDLE CHUCK 702628 ASNIS III 6.5/8.0 ELASTOSIL T-HANDLE WITH LG AO 1 SE 1320-0210 6 GAMMA 3 OPTIONAL INSTRUMENT TRAY 1320-0210 GAMMA 3 SET SCREWDRIVER 1320-9105 INSTRUMENT TRAY, OPTIONAL 1407-4006 NAIL EXTRACTION ADAPTER 1806-0020 GUIDE WIRE RULER 1806-0110 UNIVERSAL ROD 1806-0125 REDUCTION SPOON 1806-0130 WRENCH 8mm / 10mm 1806-0170 SLOTTED Hammer 1806-0232 SCREWDRIVER LONG 1806-0460 DRILL SLEEVE 4.2mm 1320-0041 CANNULATED CUTTER 1320-0042 SLEEVE FOR CANNULATED CUTTER 1320-0112 GAMMA 3 U WIRE FOR K WIRE CLIP 1320-0160 FRAGMENT CONTROL CLIP 1320-0170 FRAGMENT CONTROL SLEEVE 702634 ASNIS III 6.5/8.0 LG A0 COUPLING-HALL FITTING 1 SE The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested, and are capable of providing the sought out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicates the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hub zone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items? (4) If you re a small business and you are an authorized distributor/reseller for the items identified above (or equivalent product/solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (5) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number. (6) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? (7) Please provide general pricing for your products/solutions for market research purposes. (8) Please submit your capabilities in regards to the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items" meet all required salient characteristics. Responses to this notice shall be submitted via email to Latricia.williams2@va.gov. Telephone responses shall not be accepted. Responses must be received no later than Friday, April 26, 2019 @3:00p.m. PST. A solicitation will be issued later, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (23-APR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/VA/LBVANBC/VAMD/36C26219Q0632/listing.html)
- Record
- SN05289986-F 20190425/190423230018 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |