SOLICITATION NOTICE
73 -- NEW-Kitchen Turnkey for Temple/Waco (VA-19-00049694) Site Visit Monday May 13, 2019 9AM-12 C.S.T.
- Notice Date
- 5/2/2019
- Notice Type
- Combine Synopsis/Solicitation
- NAICS
- 333318
— Other Commercial and Service Industry Machinery Manufacturing
- Contracting Office
- Department of Veterans Affairs;VISN17 Network Contracting Activity;7400 Merton Minter Blvd. (10N17/90C);San Antonio TX 78229
- ZIP Code
- 78229
- Solicitation Number
- 36C25719Q0713
- Response Due
- 5/24/2019
- Archive Date
- 6/3/2019
- Point of Contact
- May 24, 2019 by 4 PM.CST
- Small Business Set-Aside
- Service-Disabled Veteran-Owned Small Business
- Description
- Site Visit Date: Monday May 13, 2019 @ 9 A.M. to 12 P.M. CST POC Brittany.Zaring@va.gov at 254-743-0634 ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 1.00 EA $00.00 $00.00 TEMPLE BLDG 163 DISH MACHINE W/SCRAPPING STATION Turnkey job that will require removal and demolition of existing equipment and all installation and hook-ups of new equipment, including any repairs needed to floor or walls as a result of the demolition/installation. It is turnkey but not limited to connection of all utility lines, breaker, and piping associated with the new machine and scrapping station. LOW-ENERGY FLIGHT TYPE DISH MACHINE WITH STEAM AND BLOWER DYER a. 1-year parts and labor warranty b. Water usage 58 gallons per hour c. digital controls with machine diagnostics d. low temperature alert e. start and stop switch at both ends f. doors open indicator g. drain open indicator h. 3 1/2 H. P. prewash, power wash, and power rinse pump motors i. Capless auto clean wash arms j. removable stainless-steel scrap pans and baskets k. 30" wide conveyor belt l. dual rinse m. auto clean n. auto delime o. front and rear panels p. variable speed conveyor q. steam booster heater r. steam blower dryer s. right to left operation with right side being nearest existing pulper. t. automatic soil removal system u. 480/60/3 phase v. Must be installed a minimum of 24" from wall LOCAL STOCK NUMBER: FT1000E+ENERGY 0002 1.00 EA $00.0000 $00.00 SITE VISITS REQUIRED (3) a. Initial site visit prior to bid to verify all existing conditions, devices, equipment, dimensions, location, power cable, steam, hot water, cold water, drain route, measurements and areas provided in scope of work b. Second site visit to remove and demolish existing dish machine and scrapping station. Demolition process to be completed within two calendar days. c. Third site visit will occur after VA repairs the floor and walls after the existing dish machine and scrapping station is removed by contractor. Third site visit to install new dish machine and scrapping station. Install to be completed within eight calendar days. 0003 1.00 EA $00.00 $00.00 FABRICATED SOILED DISHTABLE APPROXIMATELY 10 FT-11FT LONG AND 3 AND 1/4 FT WIDE APPROXIMATELY 3FT-4FT LONG AND 2FT-2 AND 1/2FT WIDE Scrapping Station to consist of a soiled dish table (approximately 10ft-11ft long and 3ft and 1/4ft - 3ft and 3/4ft wide) with dish drain table (approximately 3ft-4ft long and 2ft to 2ft and 1/2ft wide) connected to the soiled dish table which will serve the purpose of transferring full racks which hold mugs, cups, bowls, etc. to be within 8-12" of the load end of the dish machine, magnetic silver saver, stub rollers, 2 stationary sinks (one by dish machine and one in front of the middle of scrapping station), and 2 scrapping/pre-rinse spray nozzles, overhead rack and storage shelf, gravity roller conveyor, drainboard table located by dish machine to be matched up against and connected to existing pulper a. Soiled dish table with dish drain table connected b. Approximately 1 and 1/2ft - 1 and 3/4ft wide and the other Soiled dish table divided in two sections (section closest to the wall Approximately 1 and 1/2ft - 1 and 3/4ft wide and the other approximately 1 and 1/3ft-1 and 1/2ft wide) with the section farthest from wall connected to water source leading to pulper c. 2 stationary sinks, one by dish machine and one in front of scrapping table d. Two pre-rinse spray nozzles e. Gravity roller-conveyor f. Scrapping table to be 8" to 12" of dish machine loading end and to be matched up and connected to existing pulper on the other end g. Magnetic silver saver h. Overhead rack and storage shelf to match the length of the soiled dish table i. Drain table piece to be approximately half the width of the soiled dish table j. Stainless steel construction k. Drain table may consist of solid stainless steel or gravity rollers 0004 1.00 EA N/C $0.00 ADDITIONAL ITEMS a. Upgrade the water softening system and piping to support the dish machine. b. Repair any damage to floors, walls, and ceilings that occurs during installation. c. Must have a commercial kitchen equipment business that has operated continuously for the past five (5) years and have accomplished similar work in the removal and installation of dish machine and scrapping station units for a minimum of three (3) years. GRAND TOTAL $00.00 NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (02-MAY-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/VA/VASTHCS/VASTHCS/36C25719Q0713/listing.html)
- Place of Performance
- Zip Code: 76502
- Record
- SN05300433-F 20190504/190502230057 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |