SOLICITATION NOTICE
65 -- Commodities-544-19-2-126-0040-OPMI Lumera 700 Sys-OR-544 (VA-19-00047475)
- Notice Date
- 5/22/2019
- Notice Type
- Combine Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Veterans Affairs;Ralph H. Johnson VA Medical Center;109 Bee Street;Charleston SC 29403-5799
- ZIP Code
- 29403-5799
- Solicitation Number
- 36C24719Q0580
- Response Due
- 5/29/2019
- Archive Date
- 9/5/2019
- Point of Contact
- 843-789-6682
- Small Business Set-Aside
- Service-Disabled Veteran-Owned Small Business
- Description
- Solicitation Number: 36C24719Q0580 Notice Type: Combined Synopsis/Solicitation Synopsis: This is a COMBINED SYNOPSIS/SOLICITATION for commercial services/items prepared in accordance with the format in subpart 12.6, in conjunction with the policies and procedures for solicitation, evaluation, and award as prescribed under FAR 13.1, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) The solicitation number is 36C24719Q0580 and is issued as a COMBINED SYNOPSIS/SOLICITATION (iii) The provisions and clauses incorporated into this solicitation document are those in effect through Federal Acquisition Circular 2005-52, November 2, 2011. Provisions and clauses incorporated by reference have the same force and effect as if they were given in full text. The full text of the Federal Acquisition Regulations (FAR) and Veterans Affairs Acquisition Regulations supplement (VAAR) can be accessed on the Internet at http://www.arnet.gov/far (FAR) and http://vaww.appc1.va.gov/oamm/vaar (VAAR) (iv) This solicitation is issued as a total service disabled veteran owned small business set aside. The North American Industry Classification System (NAICS) code is 334516. (v) This requirement consists of the following: Brand name or equal ITEM NO. DESCRIPTION QUANTITY UNIT ESTIMATED OR STOCK NO. UNIT COST ----------------------------------------------------------------------------- 2111-614-01SF FS 1 CARL ZEISS MEDITEC, INC. FLOOR STAND - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-10FC CPC6 2 CARL ZEISS MEDITEC, INC. 6M CABLE FOR 14FCT. FCP - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-10FC CPWL 3 CARL ZEISS MEDITEC, INC. WIRELESS FOOT CONTROL PANEL - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-10LS S1XE 4 CARL ZEISS MEDITEC, INC. | XENON| SUPERLUX EYE - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-10OH HD 5 CARL ZEISS MEDITEC, INC. | OVERHEAD| DISPLAY - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-10TB BFS 6 CARL ZEISS MEDITEC, INC. TRANSP.BAGGAGE(FLOOR,S/U) - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-20AS SEZ 7 CARL ZEISS MEDITEC, INC. | ASSISTANT| SCOPE W/EL.ZOOM - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-30AL L128D 8 CARL ZEISS MEDITEC, INC. 000000-2111-61430AL128D - OPMI LUMERA 700 SYSTEM 3 EA 2111-614-30AL L60D 9 CARL ZEISS MEDITEC, INC. | 60D ASPHERIC| LENS - OPMI LUMERA 700 SYSTEM 3 EA 2111-614-30ID DIS 10 CARL ZEISS MEDITEC, INC. | INT.DATA| INJECTION SYSTEM - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-30MT TRAY 11 CARL ZEISS MEDITEC, INC. | RESIGHT| METAL TRAY - OPMI LUMERA 700 SYSTEM 3 EA 2111-614-30RE E700 12 CARL ZEISS MEDITEC, INC. | RESIGHT 700 -| OPMI LUMERA 700 SYSTEM 1 EA 2111-614-30SE ETDOVE 13 CARL ZEISS MEDITEC, INC. | SET DOVETAIL| MOUNT RESIGHT - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-30ST TLH200 14 CARL ZEISS MEDITEC, INC. | 1 LENS| HOLDER F200 - OPMI LUMERA 700 SYSTEM 3 EA 2111-614-40PH HD 15 CARL ZEISS MEDITEC, INC. | 1CHIP HD| CAMERA - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-50CA AL351B 16 CARL ZEISS MEDITEC, INC. | CALLISTO EYE,| V3.5.1 BASIC - OPMI LUMERA 700 SYSTEM INCLUDES 1/EA ITEM CODE 000000-2111-614-50CAL36B CALLISTO EYE, V3.6.1 BASIC 1 EA 2111-614-50CA ALMLESS 17 CARL ZEISS MEDITEC, INC. | CALLISTO EYE| ASSI MARKERLESS - OPMI LUMERA 700 SYSTEM | 1/EA| INCLUDES 1/EA ITEM CODE 000000-2111-614-50CAL36M CALLISTO EYE V3.6.1 MARKERLESS 1 EA 2111-614-50CE EFSI 18 CARL ZEISS MEDITEC, INC. | INT.CALLISTO| EYE FLOOR STAND - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-60AC C22 19 CARL ZEISS MEDITEC, INC. | ASEPSIS CAPS| 22 MM - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-60AC CBS 20 CARL ZEISS MEDITEC, INC. | BASIC SET -| OPMI LUMERA 700 SYSTEM 1 EA 2111-614-60HG G 21 CARL ZEISS MEDITEC, INC. RESTERILIZ.HANDGRIPS(6PACK) - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-90EP P10 22 CARL ZEISS MEDITEC, INC. | EYEPIECE| 10X,2PC - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-90EP P10A 23 CARL ZEISS MEDITEC, INC. | EYEPIECE| 10X,2PC - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-90O2 200 24 CARL ZEISS MEDITEC, INC. | OBJECTIVE| LENS F=200MM - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-90TI IM 25 CARL ZEISS MEDITEC, INC. INVERTERTUBE E INCL. ASEPSIS - OPMI LUMERA 700 SYSTEM 1 EA 2111-614-90TI IMA 26 CARL ZEISS MEDITEC, INC. INVERTERTUBE E MOT. W/ASEPSIS - OPMI LUMERA 700 SYSTEM 1 EA 1412-349 27 THIS ITEM INCLUDED AT NO ADDITIONAL CHARGE WHEN PURCHASED WITH THIS QUOTED SYSTEM*** ZEISS MS | Fixed PSF Trion/532s for Zeiss/Moller| 2 EA 266002-1144-9 956 28 **THIS ITEM INCLUDED AT NO ADDITIONAL CHARGE WHEN PURCHASED WITH THIS QUOTED SYSTEM** CARL ZEISS MEDITEC, INC. | LUMERA 700| EXTENDED 1 EA 2111-614-60AC C22 29 CARL ZEISS MEDITEC, INC. | ASEPSIS CAPS| 22 MM - OPMI LUMERA 700 SYSTEM 3 EA 2111-614-60HG G 30 CARL ZEISS MEDITEC, INC. RESTERILIZ.HANDGRIPS (6PACK) - OPMI LUMERA 700 SYSTEM 3 EA SALIENT CHARACTERISTICS OPMI LUMERA 700 is a surgical microscope intended for the illumination and magnification of the surgical area and for the support of visualization in surgical procedures for both the anterior segment of the eye (e.g. cataract, cornea, glaucoma) and, when used in combination with the RESIGHT ® non-contact fundus viewing system, the posterior segment of the eye (retina, vitreous). ** SPECIFICATIONS ** OPTICS: · Magnification: Main Microscope: 3.5x - 21x, Motorized zoom system with apochromatic optics, 1:6 zoom ratio, magnification factor = 0.4x - 2.4x. Assistant Microscope (optional): 3.5x - 21x, Motorized zoom system with apochromatic optics, 1:6 zoom ratio, magnification factor = 0.4x - 2.4x. · Focusing: Motorized, focusing range 70 mm (30 mm downward/40 mm upward) · Objective lens: focal length, f = 200 mm or f = 175 mm · Tubes / eyepieces: 180 ° tiltable binocular tube, f = 170 mm, 10x widefield eyepieces MECHANICALS: · Microscope tilt mechanism: With self-locking control gear, manually adjustable via rotary knob, Tilt angle ± 90 °/-20 ° · X-Y coupling Adjustment range: max. 61 mm x 61 mm, Automatic centering at the press of a button · Electromagnetic clutches ELECTRICAL: · Rated voltage: 115 V (100-125 V~ ± 10%), 230 V~ (220-240 V~ ± 10%) · Current consumption: 115 V~ max. 10 A, 230 V~ max. 8 A · Rated frequency: 50-60 Hz · Illumination: Halogen: 2 halogen reflector lamps 12 V 100 W in quick-change module for light guide, with blue barrier filter and KK 40 filter, Fully automatic lamp change. Superlux Xenon: Xenon short-arc reflector lamp, Color temperature: approx. 5000 K, Rated power: 180 W, Blue barrier filter (retina protection filter), HaMode filter or fluorescence excitation filter, Backup lamp in lamp housing, manually selectable. DIMENSIONS: Floorstand: Suspension arm: Length: 850 mm, Lateral tilt angle: 320 °, Travel: +360 mm / -360 mm Carrier arm: Length: 450 mm, Lateral tilt angle: 320 ° Stand height: 1880 mm Base (dimensions): 805 x 805 mm Maximum permissible load on the suspension arm when the surgical microscope (without tube, eyepieces,objective lens) and the XY coupling are mounted: 9 kg. (vi) 52.212-1 Instructions to Offerors - commercial Items, apply to this solicitation with the following addenda, FAR 52.216-18 Ordering; VAAR 852.236-76 Correspondence; VAAR 852.237-70 Contractor Responsibilities; VAAR 852.270-1 Representatives of Contracting Officers; VAAR 852.273-75 Security Requirements for Unclassified Information Technology Resources (vii) 52.212-2, Evaluation - Commercial Items: FAR provision 52.212-2 applies to this solicitation. The Government anticipates awarding a single contract resulting from this solicitation to the lowest priced technically acceptable offer that conforms to all solicitation requirements. Award without discussions is contemplated and all offerors are encouraged to submit their best offer with their initial submission. To be considered technically acceptable for award each offeror must provide with their submitted quote/offer: 1. Documentation that confirms the company/employees are manufacturer authorized resellers/ distributors and installers of the quoted items. 2. If you are quoting/offering or equal items, the offeror must submit manufacturer product literature that confirms the item(s) meets all the salient characteristics for the specified items. The salient characteristics for the specified item(s) are contained in the applicable manufacturer s literature. 3. If you are quoting/offering or equal items, the offeror must clearly identify the exact make, model, manufacturer and item description for each line item to be considered. Quotes/offerors that do not provide an adequate description of how the equal product meets the salient characteristics will not be considered for award. This is not applicable to offerors that are quoting EXACT MATCH items. 4. Documentation that confirms the company is registered and is the required socio-economic category in the System for Award Management (SAM) located at https:// www.sam.gov SDVOSB s must be registered in VetBizOpps: https://www.vip.vetbiz.gov/ (viii) 52.212-3 Offeror Representations and Certifications - Commercial Items- Offeror's are to include a COMPLETED COPY OF PROVISION 52.212-3 WITH THE WRITTEN QUOTE, a copy of the provision may be attained from http://www.arnet.gov/far; if not provided, the offer may not be considered for award. (ix) 52.212-4 Contract Terms and Conditions - Commercial Items: apply to this solicitation with the following addenda; VAAR 852.203-70 Commercial Advertising, VAAR 852.237-76 Electronic Invoice Submission. (x) 52.212-5 Contracts Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items; The following FAR clauses identified at paragraph b of FAR 52.212.5 are considered checked and are applicable to this acquisition: 52.219-4, 52.219-8, 52.219-28, 52.219-3, 52.222-19, 52.222.21, 52.222-26, 52.222.35, 52.222-36, 52.222-37, 52.222-39, 52.225-1, 52.232-34, 52.222-41, 52.222-44 (xi) n/a (xii) The Defense Priorities and Allocations System (DPAS) is not Applicable to this acquisition (xiii) n/a (xiv) QUESTIONS: All questions regarding this solicitation need to be electronically submitted to Michael Giffon, NCO 7 Contract Specialist e-mail michael.giffon@va.gov. The solicitation number must be identified on all submitted questions. (xv) Site Visit: N/A (xvi) QUOTES/OFFERS ARE DUE May 29, 2019, at 3:00PM eastern standard time (est). Only electronic offers will be accepted; submit quotation by email to Michael Giffon, NCO 7 Contract Specialist e-mail michael.giffon@va.gov. All offers must include the solicitation number. Quotes/offers received after this date may not be considered for award. (xvii) Contact information Contracting Office Address: Network Contracting Office 7-SAO EAST Department of Veterans Affairs 325 Folly Road, Ste 300 Charleston, SC 29412 SHIP TO ADDRESS: WJB DORB VAMC BLDG 100 Warehouse 6439 Garners Ferry Road Columbia SC 29209 Attn: Leland Woerner 803-776-4000 x6579 Leland.woerner@va.gov Primary Point of Contact: Michael Giffon Michael.giffon@va.gov 843-789-6682 NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (22-MAY-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/VA/ChaVAMC/VAMCCO80220/36C24719Q0580/listing.html)
- Record
- SN05319676-F 20190524/190522230029 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |