MODIFICATION
58 -- R10 with internal 410-470 MHz Radio
- Notice Date
- 6/3/2019
- Notice Type
- Modification
- Contracting Office
- Bldg 36000, Darnall Loop, Room 1308, Fort Hood, Texas 76544-5025, TX 76544
- ZIP Code
- 22030
- Solicitation Number
- W91151-19-Q-0075
- Response Due
- 6/5/2019
- Archive Date
- 12/2/2019
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W91151-19-Q-0075 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 334220 with a small business size standard of 750.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-06-05 17:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be fort Hood, TX 76544 The MICC Fort Hood requires the following items, Meet or Exceed, to the following: LI 001: R10 with internal 410-470 MHzRadio - R10-001-60, 4, EA; LI 002: TSC3, Access, No Radio Supports CDMA and GSM - TSC3-01-1022, 2, EA; LI 003: TDL 450H Radio Sys. Kit, 35W 450-470MHz - 74451-96, 1, EA; LI 004: TSC3 Range Pole Bracket - 82758-00, 3, EA; LI 005: Rover Rod, 2M, AL, Snap-Lock - 5125-20-FLY, 3, EA; LI 006: Bipod, Thumb-Release, 1/2-13SS Universal, YEL - 5217-04-YEL, 3, EA; LI 007: Bag, 2M Pole, Snap-Lock - 8151-02-FLY, 3, EA; LI 008: Antenna Pole, Snap Lock, 6', YEL, FLY - 5139-02-XXX, 1, EA; LI 009: Antenex Radio Whip Antenna 5Db - B4505CN, 1, EA; LI 010: Case - Pouch for Radio Antenna Mounting Pole - 44098-00, 1, EA; LI 011: Battery Power Cable, Mueller Clips to SAE 2, 7ft - CA-1388-06, 1, EA; LI 012: Extension, 0.25M, GPS, BLK, FOR, FLY, YEL, WHT - 5145-00-FLY, 1, EA; LI 013: 1-Year Warranty on equipment, 1, EA; LI 014: On site Training - up to 8 hrs, 2, DAYS; LI 015: On site Delivery, 1, EA; LI 016: Tech Support or equivalent (i.e. 24/7 tech support via phone or email), 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Hood intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Hood is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In responding to this request for quote, you must provide the manufacturer's name and part numbers AND salient characteristics of the items you are proposing to sell to the Government. Regardless of the terminology used in each RFQ ("Brand Name or Equal", or "meet minimum stated specifications), the information describing what you are offering must be physically written into the seller's bid specification block. Salient characteristics are defined as "pronounced features of an item that identify it describe its size and composition, functional intent, and/or operational capabilities or limits." When researching product capabilities, you must, as a minimum, respond with feature for feature comparisons in order for your product to be technically evaluated for sufficiency. Responses such as "bidding exact match", "as specified", or cutting and pasting the Government's specification information into the seller's bid specification block are not acceptable responses. Offerors who respond in any of the three examples directly above will be eliminated from the competition without consideration of their offer. If you are bidding the same product as is being requested, your seller bid specification should indicate: "Bidding on Manufacturer (Insert Name) and Part Number (Insert Number). If you are bidding on an "or equal" product, your seller bid specification must state: Bidding on Manufacturer (Insert Name) and Part Number (Insert Number), containing the following salient characteristics (insert salient characteristics). If your response does not contain all of the required information called out in this notice, your quote will be determined nonresponsive and will not be NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (03-JUN-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/b24dceda126d2b281f1eed47b728967b)
- Place of Performance
- Address: fort Hood , TX 76544
- Zip Code: 76544-5027
- Country: US
- Zip Code: 76544-5027
- Record
- SN05329883-F 20190605/190603230044 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |