SOLICITATION NOTICE
Z -- Mt. Elbert Rehabilitation, Unit #1 & Unit #2 Shaft Seal Replacemen
- Notice Date
- 6/6/2019
- Notice Type
- Synopsis
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- Bureau of Reclamation<br />Great Plains Region<br />Regional Office<br />PO Box 36900<br />Billings<br />MT<br />59107<br />US<br />
- ZIP Code
- 59107
- Solicitation Number
- 140R6019R0004
- Point of Contact
- Gillespie, Jeremy
- Small Business Set-Aside
- N/A
- Description
- Please see the attachment in the FedConnect link for the full text attachment of the pre-solicitation announcement. The following is a summary of the work contemplated under this solicitation. Provide and/or manufacture, test and commission replacement of existing shaft seals with mechanical shaft seals for Pump Generator Units 1 and 2 in the Mt. Elbert Pump Generating Plant. Remove and dispose of existing Unit 1 packing box, Unit 2 mechanical seal, and associated hardware. Provide and/or manufacture mechanical seals for both Units 1 and 2: Provide and/or manufacture the mechanical seal to accommodate the same seal elements across both units. Provide and/or manufacture the mechanical seal to attach to each unit ™s unique headcover. Provide and/or manufacture shaft sleeves for Unit 1 and Unit 2, if needed for selected method. The sleeve will not be designed and supplied if mechanical seal rotating equipment can be installed directly onto shaft. The principal components of work to be performed under these specifications include the following: ¿ Provide and/or manufacture, test and commission replacement of existing shaft seals with mechanical shaft seals for Pump Generator Units 1 and 2 in the Mt. Elbert Pumped Storage Powerplant. ¿ Remove and dispose of existing Unit 1 packing box, Unit 2 mechanical seal, and associated hardware. ¿ Provide and/or manufacture mechanical seals for both Units 1 and 2: o Provide and/or manufacture the mechanical seal to accommodate the same seal elements across both units. o Provide and/or manufacture the mechanical seal to attach to each unit ¿s unique headcover. ¿ Provide and install shaft sleeves for Unit 1 and Unit 2, if needed for selected method. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (06-JUN-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/fe0a90d9964b2603da56bfe15cb7416a)
- Record
- SN05333031-F 20190608/190606230006 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |