FBODaily.com | FedBizOpps: PRESOL | 65 | Cardiac, Thoracic, and Vascular Instruments

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 20, 2019 FBO #6418
SOLICITATION NOTICE

65 -- Cardiac, Thoracic, and Vascular Instruments

Notice Date: 6/18/2019
Notice Type: Combine Synopsis/Solicitation
NAICS: 339112 — Surgical and Medical Instrument Manufacturing
Contracting Office: Department of Veterans Affairs;Network Contracting Office (NCO) 10;6150 Oak Tree Blvd., Suite 300;Independence OH 44131
ZIP Code: 44131
Solicitation Number: 36C25019Q0623
Response Due: 7/2/2019
Archive Date: 8/2/2019
Point of Contact: Independence, OH 44131
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation document will not be issued. This solicitation is a request for quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2019-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112, with a small business size standard of 1000 Employees. The Network Contracting Office (NCO) 10 (Indiana, Ohio & Michigan) 6150 Oak Tree Blvd., Suite 300, Independence, OH 44131 is seeking to purchase multiple instruments for our Cardiac, Thoracic, and Vascular Surgery lines, due to increases in physician staff across all service lines. All interested companies shall provide quotations for the following: Supplies ITEM DESCRIPTION OF SUPPLIES QTY UNIT PRICE TOTAL 0001 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž LEGACY Jacobson Micro Needle Holder, round handle, extended 10 mm diameter knurling, with ratchet, straight DIAMOND DUST jaws, regular boxlock, 9" / 23 cm (Item # 3003-346) 0002 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž LEGACY Jacobson Micro Needle Holder, round handle, extended 10 mm diameter knurling, with ratchet, straight DIAMOND DUST jaws, regular boxlock, 10" / 25.4 cm MANUFACTURER PART NUMBER (MPN): 3003-348 0003 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Jacobson Needle Holder (for large needles), round handle, with ratchet, straight DIAMOND DUST jaws, streamline box lock, 9" / 23 cm MANUFACTURER PART NUMBER (MPN): 3003-530 0004 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Jacobson Heavy Style Needle Holder (for large needles), round handle, with ratchet, straight DIAMOND DUST jaws, 10" / 25.4 cm MANUFACTURER PART NUMBER (MPN): 6006-340 0005 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Jacobson Micro Needle Holder, flat handle, with ratchet, straight DIAMOND DUST jaws, regular box lock, 8-1/4" / 21 cm MANUFACTURER PART NUMBER (MPN): 6006-108 0006 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Lillehei-Potts Scissors, curved Super Cut blades, tenotomy tips, black platinum ring handles, 6-1/2"/ 16.5 cm MANUFACTURER PART NUMBER (MPN): 7007-263SC 0007 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Premier Jacobson Micro Scissors, spring style, round handle, 45 ° angled micro fine blades, 8" / 20 cm MANUFACTURER PART NUMBER (MPN): 7007-492-8 0008 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Premier Jacobson Micro Scissors, spring style, round handle, 90 ° angled micro fine blades, 8" / 20 cm MANUFACTURER PART NUMBER (MPN): 7007-496-8 0009 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Premier Jacobson Micro Scissors, spring style, round handle, V-neck, 125 ° angled micro fine blades, 8" / 20 cm MANUFACTURER PART NUMBER (MPN): 7007-499-8 0010 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž LEGACY Micro Forceps, round handle, Never Shear Dual Guide, straight 1.0 mm DIAMOND DUST platform ring tips, 9" / 23 cm MANUFACTURER PART NUMBER (MPN): 3003-926 0011 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž DeBakey Forceps, flat handle, 2 mm tips, 9-1/2" / 24 cm MANUFACTURER PART NUMBER (MPN): 4004-50 0012 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž DeBakey Forceps, flat handle, 2.7 mm tips, 9-1/2" / 24 cm MANUFACTURER PART NUMBER (MPN): 4004-50-A 0013 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Omni Tract Style Retractor Blade #1 FLEX/ROTATE MANUFACTURER PART NUMBER (MPN): Q38037-01 0014 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Omni Tract Style Retractor Blade #2 FLEX/ROTATE MANUFACTURER PART NUMBER (MPN): Q38037-02 0015 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Omni Tract Style Retractor Blade #3 FLEX/ROTATE MANUFACTURER PART NUMBER (MPN): Q38037-03 0016 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Omni Tract Style Retractor Blade #4 FLEX/ROTATE MANUFACTURER PART NUMBER (MPN): Q38037-04 0017 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Omni Tract Style Retractor Blade #5 MANUFACTURER PART NUMBER (MPN): Q38037-05 0018 (SCANLAN or Equal) 30.00 EA _______ _______ SCANLAN Ž Satinsky Clamp, with custom jaw dimensions, 10" / 25.4cm MANUFACTURER PART NUMBER (MPN): 3003-80-01 0019 (SCANLAN or Equal) 30.00 EA _______ _______ SCANLAN Ž Dennis Clamp, with custom jaw dimensions, 6 1/2" / 16.5cm MANUFACTURER PART NUMBER (MPN): 2002-92-01 0020 (SCANLAN or Equal) 30.00 EA _______ _______ SCANLAN Ž Lengthen instrument each additional inch - Lengthen 1 X 3003-442 by two (2) inches on the shaft so the length is twelve (12) inches. MANUFACTURER PART NUMBER (MPN): 971 0021 (SCANLAN or Equal) 30.00 EA _______ _______ SCANLAN Ž Lengthen instrument each additional inch - Lengthen 1 X 3003-442 by two (2) inches on the shaft so the length is twelve (12) inches. MANUFACTURER PART NUMBER (MPN): 971A 0022 (SCANLAN or Equal) 15.00 EA _______ _______ SCANLAN Ž Cardiovascular Needle Holder, ring handle, DIAMOND DUST jaws, 10" / 25.4 cm MANUFACTURER PART NUMBER (MPN): 3003-442 0023 (SCANLAN or Equal) 15.00 EA _______ _______ SCANLAN Ž Cardiovascular Needle Holder, ring handle, DIAMOND DUST jaws, 8" / 20 cm MANUFACTURER PART NUMBER (MPN): 3003-438 0024 (SCANLAN or Equal) 30.00 EA _______ _______ SCANLAN Ž Cardiovascular Needle Holder, ring handle, DIAMOND DUST jaws, 10" / 25.4 cm MANUFACTURER PART NUMBER (MPN): 3003-442 0025 (SCANLAN or Equal) 15.00 EA _______ _______ SCANLAN Ž LEGACY Jacobson Micro Needle Holder, Scan-II handle, extended 10 mm knurling, with ratchet, straight DIAMOND DUST jaws, regular boxlock, 8" / 21 cm MANUFACTURER PART NUMBER (MPN): 3003-374 0026 (SCANLAN or Equal) 15.00 EA _______ _______ SCANLAN Ž LEGACY Jacobson Micro Needle Holder, Scan-II handle, extended 10 mm knurling, with ratchet, straight DIAMOND DUST jaws, streamline boxlock, 10" / 25.4 cm MANUFACTURER PART NUMBER (MPN): 3003-388 0027 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Foerster Clamp (5 mm tapered to 7 mm), ring handle, curved left 20 mm oval ring jaws, with ratchet, 9-1/4" / 23.5 cm working length, 13-1/4" / 33.5 cm total length MANUFACTURER PART NUMBER (MPN): 9009-229 0028 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Foerster Clamp (10 mm), ring handle, curved left 20 mm oval ring jaws, 12-1/2" / 32 cm working length, 16-3/4" / 42.4 cm total length MANUFACTURER PART NUMBER (MPN): 9909-925 0029 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic DeBakey Forceps (5 mm), round axial handle, 3.5 mm width straight DeBakey jaws, without ratchet, working length 8 / 20 cm, total length 14-1/4" / 36 cm MANUFACTURER PART NUMBER (MPN): 9009-524 0030 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Khan Decortication Grasper (10 mm), ring handle with 1-gold ring, 20 mm oval ring jaws with enhanced serrations, with ratchet, 9-1/2" / 24 cm working length, 13-1/4" / 33.5 cm total length MANUFACTURER PART NUMBER (MPN): 9909-940 0031 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Resano Forceps (5 mm), round axial handle, 2.5 mm width multi-tooth Resano jaws, without ratchet, working length 8 / 20 cm, total length 14-1/4 / 36 cm MANUFACTURER PART NUMBER (MPN): 9009-510 0032 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Gonzalez-Rivas Dissector (5 mm), ring handle, fine mixter-style 1x2 DeBakey jaws, without ratchet, 19 cm working length, 11-1/2" / 29 cm total MANUFACTURER PART NUMBER (MPN): 9009-213 0033 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Node Grasper (5 mm tapered to 7 mm), ring handle, curved left 11 mm oblong ring jaws, with ratchet, 12-1/2" / 32 cm working length, 16-3/4" / 42.4 cm total length MANUFACTURER PART NUMBER (MPN): 9009-220 0034 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic DeBakey Cooley Forceps, (10 mm), ring handle, 90 ° angled jaw, without ratchet, 9-1/2" / 24 cm working length, 13-1/2" / 34 cm MANUFACTURER PART NUMBER (MPN): 9909-203 0035 (SCANLAN or Equal) 10.00 EA _______ _______ SCANLAN Ž Thoracoscopic Wolf Suction Instrument, (3.2 to 5 mm curved tapered shaft), 6 mm width blunt tip, 8-3/4" / 22 cm working length, 14-1/4 / 36 cm total length. 1 brush included MANUFACTURER PART NUMBER (MPN): 9009-912 0036 1.00 EA _______ _______ Delivery GRAND TOTAL _______ Delivery shall be provided no later than 150 days after receipt of order/award of contract. delivery terms FOB destination and any special delivery requirements]. The contractor shall deliver all line item to the Louis Stokes Cleveland VA Medical Center 10701 East Boulevard, Cleveland 44106-1702 Attention: Shawn Huelsman. Contractor shall deliver a complete set of indications for use (IFU) along with detailed cleaning sterilization instructions. Contractor Shall provide in-service training to all operating room and SPS personnel when requested within two weeks after delivery. Award shall be made to the quote whose quotation offers the best value to the government, considering Past Performance, Life cycle and life cycle cost (Contractor shall supply any documentation regarding longevity if available.), Warranty, Maintenance Availability, and delivery terms. The government will evaluate information based on the following evaluation criteria: technical capability factor "meeting or exceeding the requirement, past performance, and price. Products offered shall meet the following requirements: ALL SURGICAL INSTRUMENTS OFFERED SHALL BE MADE OF SURGICAL GRADE STAINLESS-STEEL AND TITANIUM FORGED IN SWEDEN OR THE UNITED STATES. SURGICAL STAINLESS-STEEL SHALL BE MADE FROM EITHER MARTENSITIC 420/2303, 440 STAINLESS STEEL OR STRONGER. STAINLESS STEEL SHALL FOLLOW o ASTM F1089-10 STANDARD TEST METHOD FOR CORROSION OF SURGICAL INSTRUMENTS o ASTM F899-12B STANDARD SPECIFICATION FOR WROUGHT STAINLESS STEELS FOR SURGICAL INSTRUMENTS. o ASTM F1744-96 (2016) STANDARD GUIDE FOR CARE AND HANDLING OF STAINLESS STEEL SURGICAL INSTRUMENTS All TITANIUM IMPLANTS SHALL BE MADE OF SURGICAL GRAD EQUAL TO TI-6AL-4V/GRADE 5 OR TI-6AL-4V ELI/GRADE 23 ALL SURGICAL INSTRUMENTS OFFERED SHALL BE ASSEMBLED AND FINISHED IN SWEDEN OR THE UNITED STATES. ALL SURGICAL INSTRUMENTS OFFERED SHALL INCLUDE SPECIFIC INDICATIONS FOR USE (IFU) THAT WILL DESCRIBE THE COMPLETE DISASSEMBLY, CLEANING, DECONTAMINATION, ASSEMBLY, AND STERILIZATION PARAMETERS. ALL ITEMS SHALL BE ABLE TO BE STERILIZED AT A MINIMUM OF 273 DEGREES FAREINHEIHT FOR 5 MINUTES ON A PREVACUM STERRILIZER. ALL SURGICAL INSTRUMENT PROPOSALS WILL BE SUBJECT TO TECHNICAL REVIEW. ALL CONTRACTORS SHALL PROVIDE THE FOLLOWING DOCUMENTATION PRIOR TO TECHNICAL REVIEW o DOCUMENT LISTING THE REQUESTED ITEMS ABOVE, THEIR EQUIVALENT MODEL #, AND PROVIDE A FULL AND COMPLETE DESCRIPTION OF THE PRODUCT BEING OFFERED (INCLUDING SIZE AND SPECS OF EACH INSTRUMENT). o INDICATIONS FOR USE (IFU) THAT SHALL DESCRIBE THE COMPLETE DISASSEMBLY, CLEANING, DECONTAMINATION, ASSEMBLY, AND STERILIZATION PARAMETERS. o PICTURES OF EACH PIECE OF INSTRUMENTATON BEING REQUESTED UPON REQUEST POST SOLICITATION, CONTRACTOR SHALL SEND 5 DIFFEENT INSTRUMENTS TO VAMC CLEVELAND FOR PRELIMINARY INSPECTION UNDER A DIGITAL MICROSCOPE AS PART OF THE EVALUATION. THESE INSTRUMENTS WILL BE CHECKED FOR; o PITTING, RUST, o CORRECT SIZE OF INSTRUMENTATION o WELDS OF THE INSTRUMENTS o APPROXIMATION OF JAWS o FINISHING PROCESS OF JAWS AND OVERALL INSTRUMENT o TEETH WITHIN THE JAWS OF THE INSTRUMENT UPON AWARD/DELIVERY, SURGICAL INSTRUMENTATION WILL BE INSPECTED FOR QUALITY BY SPS MANAGEMENT. ANY DEFICIENCIES WILL BE COMMUNICATED TO THE CONTRACTING OFFICER. o PITTING, RUST, o CORRECT SIZE OF INSTRUMENTATION o WELDS OF THE INSTRUMENTS o APPROXIMATION OF JAWS o FINISHING PROCESS OF JAWS AND OVERALL INSTRUMENT o TEETH WITHIN THE JAWS OF THE INSTRUMENT INSTRUMENT EXAMINATION MAY INCLUDE STERILIZATION OF EACH LOT NUMBER OF INSTRUMENT. EACH INSTRUMENT WILL BE PROCESSED IN COLLABORATION WITH THE INSTRUMENTATION IFU, VHA DIRECTIVE 1116 (2), AAMI ST-79, STERILIZER INSTRUCTIONS, AND MEDLINE CONTAINER IFUS. o INSTRUMENTS ARE SOAKED MINIMUM 5 MINUTES IN NEUTRAL PH ENZYMATIC OR DETERGENT AND RINSED WITH REVERSE OSMOSIS/DEIONIZED WATER o INSTRUMENTS ARE THEN ULTRASONICED IN NEUTRAL PH ENZYMATIC OR DETERGENT FOR MINIMUM OF 28 MINUTES o INSTRUMENTS ARE THEN RUN THROUGH A MECHANICAL WASHER FOR A MINIMUM OF 30 MINUTES o INSTRUMENTS ARE ASSEMBLE AND THEN STERILIZED BETWEEN 270-275 DEGREES FOR A MINIMUM OF 5 MINUTES WITH A 45 MINUTE DRY TIME. The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following solicitation provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items [Oct 2018] FAR 52.212-3, Offerors Representations and Certifications Commercial Items [Oct 2018] Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following contract clauses apply to this acquisition: FAR 52.212-4, Contract Terms and Conditions Commercial Items JAN 2017 ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The following clauses are incorporated into 52.212-4 as an addendum to this contract: VAAR 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (JUL 2016) VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2012) VAAR 852.246-70 GUARANTEE (JAN 2008) (1 Year) VAAR 852.246-71 INSPECTION (JAN 2008) VAAR 852.215-70 Service-disabled veteran-owned and veteran-owned small business evaluation factors. (JUL 2016) (DEVIATION) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders AUG 2018 The following subparagraphs of FAR 52.212-5 are applicable: 52.203-6, 52.204-10, 52.209-6, 52.211-6, 52.219-8, 52.219-14, 52.219-27, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.222-50, 52.223-18, 52.225-1, 52.225-13, and 52.232-33. All quoters shall submit the following: one copy of their quote electronically to the email provided below. All quotations shall be sent to the christopher.callihan@va.gov. This is an open-market combined synopsis/solicitation for products as defined herein. The government intends to award a purchase order as a result of this combined synopsis/solicitation that will include the terms and conditions set forth herein. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Quoter shall list exception(s) and rationale for the exception(s). Submission shall be received not later than 1500 EST Tuesday 2 July 2019 at Contracting Office (NCO) 10 (Ohio, Indiana, & Michigan) 6150 Oaktree Boulevard Suite 300, Independence, OH 44131. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Quotes are to be emailed to Christopher Callihan at Christopher.Callihan@va.gov No telephone inquiries will be accepted. All Questions Shall be submitted in writing no later than 1200 EST 20 June 2019 in response to the Solicitation via email to christopher.callihan@va.gov. Any Government responses, answers, and or/comments will be issued via amendment to this solicitation. Point of Contact Christopher A. Callihan Contract Specialist Network Contract Office (NCO) 10 Office: 216-447-8300 x3796 Email: christopher.callihan@va.gov NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (18-JUN-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
Web Link: Link To Document
(https://www.fbo.gov/spg/VA/BreVAMC/VAMCCO80220/36C25019Q0623/listing.html)
Place of Performance: Address: Department of Veterans Affairs;Louis Stokes Cleveland VA Medical Center;10701 East Boulevard;Cleveland, OH; Zip Code: 44106-1702; Country: United States of America
Record: SN05343770-F 20190620/190618230033 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

65 -- Cardiac, Thoracic, and Vascular Instruments