SOURCES SOUGHT
72 -- Washers and Dryers
- Notice Date
- 7/1/2019
- Notice Type
- Synopsis
- NAICS
- 333318
— Other Commercial and Service Industry Machinery Manufacturing
- Contracting Office
- Department of Veterans Affairs;Network Contracting Office 2;James J. Peters VA Medical Center;130 West Kingsbridge Road;Bronx NY 10468-3904
- ZIP Code
- 10468-3904
- Solicitation Number
- 36C24219Q0870
- Response Due
- 7/5/2019
- Archive Date
- 7/10/2019
- Point of Contact
- Wilmen.Joa@va.gov
- Small Business Set-Aside
- N/A
- Description
- This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of potential qualifications relative to the North American Industry Classification Code (NAICS) 333318. The Department of Veteran s Affairs is seeking small business manufacturer or distributors of small business manufacturers, of functionally Brand-Name or Equivalent equipment to all the following: HUEBSCH Washers and Dryers ( 30LB Washer/Extractors and 35LB Steam Heated Dryers) Item Number Description 0001 30LB. CAPACITY WASHER/EXTRACTOR W/ HEAVY DUTY GAMMA A-FRAME, HIGH 200 G-FORCE EXTRACT, 9 CYCLE PROGRAMS, FULL PROGRAMMING CAPABILITY, DIRECT BELT DRIVE, MICROPROCESSOR CONTROL,HEAVY BEARINGS AND SEATS, GRAVITY DRAIN, STAINLESS STEELTOP AND FRONT, AND AUTOMATIC SUPPLY DISPENSER 208-240/60/1-3 ELECTRIC (29"W x 35"D x 45"H) 495LBS NET WEIGHT 0002 STEEL BASE FPR ANCHORING HUEBSCH FRONT LOAD WASHER TO CONCRETE FLOOR. 0003 35LB. STEAM HEATED DRYER WITH GALAXY MICROPROCESSOR CONTROL, STAINLESS STEEL DOOR CONSTRUCTION, BELT DRIVEN, SINGLE OR 3 PHASES. 8" EXHAUST VENT, (31.5"W x 47"D x 64"H). NET WEIGHT 394LBS. 0004 FIRE SUPPRESSION SYSTEM FOR 25-75 POUND DRYERS 0005 OPT FOR 75LB DRYER-OVER DRY PREVENTION TECHNOLOGY SENSES THE AMOUNT OF MOISTURE IN THE LINEN AND WILL CONSISTENTLY DRY THE LINEN TO A UNIFORM LEVEL OF DRYNESS. 0006 FREIGHT-DOCK TO DOCK 0007 INSTALLATION OF LAUNDRY EQUIPMENT, INCLUDES UN-CRATING THE EQUIPMENT, PLACING, LEVELING AND HOOKING UP TO THE UTILITIES INSTALLATION OF DRAIN BASIN 0008 STAINLESS STEEL INDIRECT WASTE WATER BASIN W/ LINT SCREEN HOLDER Items to be delivered and installation upon request. The following are the specification for each item needed: 30 lb. capacity Washer/Extractor with heavy duty gamma A-frame, high 200 G-Force extract, 9 Cycle Programs, full programming capacity, direct belt drive, Microprocessor control, heavy duty bearings and seals, gravity drain, stainless steel top and front, and automatic supply dispenser. 208-240/60/1-3 electric, (29 Wx35 Dx45 H), 495 lbs. net weight. 2. Steel Base for anchoring front load washer to concrete floor. Steel base raises the washer up to an easier height for loading& un-loading and also provides more height for the gravity drain system. 3. 35lb. Steam heated Dryer with Galaxy Microprocessor control, Stainless Steel door construction, Belt driven, Single or 3 Phase. 8 Exhaust vent, (31.5 Wx47 D x 64 D). Net weight 394 lbs. 4. Fire Suppression System for 25 -75 Pound dryers. Requires 2 water hoses installed behind the back of the dryer. If a fire is sensed the drum will stop and water is sprayed on the clothes containing the fire in the tumbler. CARE also has provisions to activate output signal. The signal can be used to activate an alarm, pager of light. 5. OPT for 75lb dryer Over Dry Prevention technology- senses the amount of moisture in the linen and will consistently dry the linen to a uniform level of dryness. The OPT uses the cylinder lifters and the cylinder of the dryer drum to measure moisture in the linen. This is the best, most accurate method of measuring the dryness level of the linen. 6. Stainless Steel indirect waste water basin, with Lint Screen holder. Includes 2 lint screens and cover. RESPONSE DATE (DEADLINE): July 05, 2019 at 11:00 AM. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. Please be advised that the Government will not pay for any information submitted under this announcement. The applicable North American Classification System (NAICS) Code for this requirement is 333318 (Other Commercial and Service Industry Machinery Manufacturing). Responses due are to be submitted by e-mail only to Wilmen.Joa@va.gov. Name of firm, Socio-Economic category of the firm is needed, capable (SDVOSB & VOSB) vendors should supply CVE Certification letter from Veterans Information Pages (VIP), along with complete address, phone & fax number of contacts. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (01-JUL-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/VA/BroVANAP/VAMD/36C24219Q0870/listing.html)
- Place of Performance
- Address: Department of Veterans Affairs;Montrose Campus (Hudson Valley);2094 Albany Post Road;Montrose, NY
- Zip Code: 10548
- Country: USA
- Zip Code: 10548
- Record
- SN05356848-F 20190703/190701230015 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |