SOURCES SOUGHT
A -- Diamond Anvil
- Notice Date
- 7/8/2019
- Notice Type
- Synopsis
- NAICS
- 332710
— Machine Shops
- Contracting Office
- 2575 Sand Hill Road Menlo Park CA 94303
- ZIP Code
- 94303
- Solicitation Number
- SLAC301389
- Response Due
- 7/12/2019
- Point of Contact
- Randy Ramiro, Buyer II, Phone 6509264253
- E-Mail Address
-
Rramiro@slac.stanford.edu
- Small Business Set-Aside
- N/A
- Description
- SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC has a requirement for domestically sourced of the following: Description: Item #1 - Diamond anvil, type IIas, Boehler-Almax design, 16-sided, diameter 3.10 mm 70° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented, Raman ultra low fluorescence [P01928] Quote: 190702KDH,QTY 2 Item #2 - Diamond anvil, type Ia, Boehler-Almax design, 16-sided, diameter 3.10 mm 70° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented [P01036],QTY 4 Item #3 - Diamond anvil, type IIas, Boehler-Almax design, 16-sided, diameter 3.30 mm 85° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented, Raman ultra low fluorescence [P01929],QTY 2 Item #4 - Diamond anvil, type Ia, Boehler-Almax design, 16-sided, diameter 3.30 mm 85° (X-ray aperture 4¿), culet of 0.30 mm, (100)-oriented [P00539],QTY 4 Item #5 - Diamond anvil, type IIas, standard design, 16-sided, diameter 3.00 mm, culet of 0.50 mm, (100)-oriented, Raman ultra low fluorescence [P01937],QTY 2 Item #6 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.50 mm, (100)-oriented [P01005],QTY 8 Item #7 - Diamond anvil, type IIas, standard design, 16-sided, diameter 3.00 mm, culet of 0.30 mm, (100)-oriented, Raman ultra low fluorescence [P01937],QTY 2 Item #8 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.30 mm, (100)-oriented [P01005],QTY 4 Item #9 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.20 mm, (100)-oriented [P01005],QTY 6 Item #10 - Diamond anvil, type Ia, standard design, 16-sided, diameter 3.00 mm, culet of 0.30 mm, (100)-oriented, partially perforated from the table side, diameter of end of partial perforation of 0.10 mm (=W), remaining diamond thickness of 0.20 mm (=D),[P01005],QTY 4 Item #11 - Carbide seat for Boehler-Almax design anvil, according to drawing Tapered Diameter 12.00 mm (=D), Height 3.00mm (=H), Taper of 5° (=T), Aperture 70° (=A) for anvil 3.10 mm 70° [ P01290],QTY 6 Item #12 - Carbide seat for Boehler-Almax design anvil, according to drawing ¿Tapered¿ Diameter 12.00 mm (=D), Height 3.00mm (=H), Taper of 5° (=T), Aperture 85° (=A), for anvil 3.30 mm ¿ 85° [ P01290], QTY 6 NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (08-JUL-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC301389/listing.html)
- Place of Performance
- Address: 2575 Sand Hill Road Menlo Park, CA
- Zip Code: 94025
- Country: US
- Zip Code: 94025
- Record
- SN05362388-F 20190710/190708230015 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |