Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 12, 2019 FBO #6500
SOLICITATION NOTICE

99 -- CDMS-RGID FLEX PCBS - Package #1

Notice Date
9/10/2019
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
334418 — Printed Circuit Assembly (Electronic Assembly) Manufacturing
 
Contracting Office
Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
 
ZIP Code
94303
 
Solicitation Number
303462
 
Archive Date
9/30/2019
 
Point of Contact
Sophia A. Perry, Phone: 6509263605
 
E-Mail Address
sophiap@slac.stanford.edu
(sophiap@slac.stanford.edu)
 
Small Business Set-Aside
N/A
 
Description
A1.7_Vertical Flex Cable Fabrication Procedures A1.6_SuperCDMSRigidFlexHandlingProcedures A1.5_PC-247-300-52-C04_CDMS VERTICAL FLEX P2 BOARD_Gerber zip file A1.4_PC-247-300-52-C04_CDMS VERTICAL FLEX P2 BOARD_Gerber A1.3_PC-247-300-51-C04_CDMS VERTICAL FLEX P1 BOARD_Gerber zip file A1.2_PC-247-300-51-C04_CDMS VERTICAL FLEX P1 BOARD_Gerber Terms an Conditions Reps and Certs SLAC National Accelerator Laboratory has a requirement for the following item(s) listed below. 1.) 8 panel LOT (2 PN's) each panel containing two PN: PC-247-300-51-C04 and two PN: PC-247-300-52-C04, QTY. 1 2.) IPC Cert per MFG LOT, QTY. 1 3.) NRE cost (if any), QTY. 2 4.) First Article Inspection per Configuration, QTY. 2 Materials supplied by SLAC upon placement of order: QTY. 8, sheets Cu clad Cirlex, PN: CIRLEX-30-CU-2-SIDES-2424 QTY. 16, sheets Cu clad Ti, Custom fabrication Nylon Bagging Material Technical Evaluation Criteria: (a) Submit samples that demonstrate the ability to etch copper that is plated to the Ti 15-3-3-3 sheets in the flex portions of the cable. (b) Submit samples that demonstrate the ability to etch 10 mil Ti 15-3-3-3 traces with and without copper plating. (c) Submit microsections that demonstrate the ability to fabricate plated through holes that connect copper traces on the rigid layers to the copper-plated titanium traces on the flex core. (d) Submit samples that demonstrate the ability to meet project design rules in a rigid-flex PCB with a Ti 15-3-3-3 flex core. (e) Adhere to drawings, procedures, and documentations provided. Quote is for product only no on-site services of any kind permitted. The bid closing date for this requirement is September 15, 2019 Representations & Certifications Rider is required for this purchase. If you have already completed one within the year please disregard. Otherwise, complete and return. All subcontractors are required to register in the System for Award Management (www.sam.gov). The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. December 2016) will be made a part of the resulting order. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/303462/listing.html)
 
Place of Performance
Address: SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025, United States
Zip Code: 94025
 
Record
SN05437678-W 20190912/190910230844-92f4e01a7d9850085dc14d1f6cb6b13e (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.