SOURCES SOUGHT
58 -- Market Survey for Supplies for Joint Combat Identification Marking System - Parts List
- Notice Date
- 9/11/2019
- Notice Type
- Sources Sought
- NAICS
- 332510
— Hardware Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W56JSR) Division E, 6565 Surveillance Loop, Building 6001, Aberdeen Proving Ground, Maryland, 21005-1846, United States
- ZIP Code
- 21005-1846
- Solicitation Number
- PANAPG-19-P-0000-031729
- Archive Date
- 10/11/2019
- Point of Contact
- Paul Truskowski, Phone: 443 861-2968, Britney Nobel, Phone: 443 861-8384
- E-Mail Address
-
paul.truskowski.civ@mail.mil, britney.d.noble.civ@mail.mil
(paul.truskowski.civ@mail.mil, britney.d.noble.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Parts List The Army Contracting Command Center (ACC), on behalf of the Army Integrated Logistics Supply Center (ILSC), intends to acquire parts to support the following The Joint Combat Identification Marking System (JCIMS) devices, which are comprised of kits and assemblies. JCIMS kits are comprised of (1) a corrugated metal, far-infrared (IR) reflective combat identification panel (CIP) that attaches to the surface of platform (different quantities depending on the platform), (2) a fabric counterpart, thermal identification panel (TIP), mounted on the top exterior of platforms, at a 40-degree angle for horizontal air-ground recognition, (3) a near-IR emitting infrared beacon (Phoenix Light) that is highly visible when viewed through image intensification devices such as night vision goggles. The Thermal Tape, which is a component of the CIP and the TIP, is also available as a standalone (tape roll with adhesive backing) to repair both the CIP and TIP if their Thermal Tape surfaces are damaged. Periodically, the CIP kits are modified to accommodate installation on new platforms. In this instance, platform measurements are taken and installation kits are made by the Original Equipment Manufacturer (OEM). However, the overall capability of JCIMS kits will not change. Requirements Description: JCIMS is intended for use on friendly ground platforms (tracked and wheeled) to complement and enhance visual identification capabilities during day and night, from ground-to-ground and/or limited air-to-ground aspect angles under a variety of atmospheric conditions to reduce the potential of fratricide due to misidentification. The government does not possess the technical data package (TDP) for the parts. The Government has previously procured these items under contract # W56KGY-15-D-0011. The purpose of this market survey is to locate potential sources to provide supplies for the following parts attached. This procurement will be an Indefinite Delivery, Indefinite Quantity (IDIQ) contract, and range quantity pricing may be requested. Prospective sources must be able to prove that the parts to be delivered will enable the JCIMS system to satisfy the requirement in the Government's specification. No Government-Furnished Equipment (GFE) or Government-Furnished Property (GFP) will be provided to sources to execute the contract. Sources must be able to fulfill orders upon contract award, with production lead time allowed for long lead materials and production ramp-up. Potential sources of the required supplies must also resolve diminishing manufacturing sources and material shortages or obsolescence issues. Requested Response Information: All interested potential sources must prepare a response (in Microsoft Word or Adobe Acrobat) no greater than 5 pages in length, specifying their ability to supply the above listed parts as required by the USG and Include the following information, at a minimum: (1) Provide the following information: a. Company Name: b. Address: c. Point of Contact: d. Phone Number: e. Email Address: f. CAGE Code: g. NACIS Code: h. DUNS Number: i. Date of incorporation j. Website address (2) Describe your company's past performance in the manufacturing and/or supplying of these supplies in the past. If available, provide Contract Number, Contract Performance Period, Point of Contact(s), e-mail address, phone number, and a brief description of your direct support of the effort. (3) Provide evidence of the contractor's facilities, qualifications of people in production, testing, calibration and experience with building the required parts listed above. Provide total available square footage of the facility, and floor space usage for each department consisting of Engineering, Material Handling, Manufacturing, and G&A efforts that shall be dedicated to this program. Provide knowledge of the JCIMS system and past history with build of supplies in support of this system. (4) Provide Information/data/documentation which show that your company has previously provided these supplies or detailed information illustrating your company's capabilities and resources to manufacture these exact supplies. (5) Describe your company's experience in identifying the alternatives for the unavailability of obsolete materials or components to mitigate obsolescence or diminishing manufacturing sources/material shortages issues. (6) Does your company maintain a Program and Assessment Tool to monitor and analyze the availability of components to allow clear and precise tracking of all obsolescence issues? If so, please elaborate on the Program and Assessment tool(s). (7) Discuss your company's capability in meeting U.S. Government delivery requirements for this specific product. Do you have product(s) or keep products in stock? Notice, Response Due Date, and Points of Contact: This is NOT a Request for Quote/Proposal or a Solicitation. The Government does not intend to award a contract on the basis of this Sources sought announcement (SSA) or reimburse any costs associated with the preparation of responses to this SSA. This SSA is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All proprietary information should be marked as such. All SSA responses should be emailed to the Technical and Competition Advocate Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the Competition Advocate. This survey is published in compliance with FAR Part 10, Market Research.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/73edcacb397c74a1703df385d08284c0)
- Place of Performance
- Address: Contractor's Facility, United States
- Record
- SN05439890-W 20190913/190912053414-73edcacb397c74a1703df385d08284c0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |