SOLICITATION NOTICE
71 -- Access Flooring
- Notice Date
- 9/12/2019
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- USPFO for PA, ANNVILLE, PA 17003
- ZIP Code
- 17003
- Solicitation Number
- 11347407
- Response Due
- 9/18/2019
- Archive Date
- 3/16/2020
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 11347407 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-05. The associated North American Industrial Classification System (NAICS) code for this procurement is 337127 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-09-18 11:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be ANNVILLE, PA 17003 The National Guard - Pennsylvania requires the following items, Brand Name or Equal, to the following: LI 001: Manufacturer: CBT Supply/SMARTdesks FFIT-CT-50-PG: Carpet Tile Assy Standard Glued Reference attached PWS Physical and performance characteristics, 638, EA; LI 002: Manufacturer: CBT Supply/SMARTdesks FFIT-FP-50-0: Panel Assy Standard Solid Reference attached PWS Physical and performance characteristics, 2878, EA; LI 003: Manufacturer: CBT Supply/SMARTdesks FFIT-FP-50-1: Panel Assy with Port 1 Reference attached PWS Physical and performance characteristics, 7, EA; LI 004: Manufacturer: CBT Supply/SMARTdesks FFIT-FP-50-2: Panel Assy with Port 2 Reference attached PWS Physical and performance characteristics, 7, EA; LI 005: Manufacturer: CBT Supply/SMARTdesks FFIT-FP-50-3: Panel Assy with Port 3 Reference attached PWS Physical and performance characteristics, 44, EA; LI 006: Manufacturer: CBT Supply/SMARTdesks FFIT-FP-50-4: Panel Assy with Port 4 Reference attached PWS Physical and performance characteristics, 84, EA; LI 007: Manufacturer: CBT Supply/SMARTdesks FFIT-FS-25PED: Pedestal 25 x 25 Solid Reference attached PWS Physical and performance characteristics, 85, EA; LI 008: Manufacturer: CBT Supply/SMARTdesks FFIT-FS-25PERM: Perimeter 25 x 25 Reference attached PWS Physical and performance characteristics, 579, EA; LI 009: Manufacturer: CBT Supply/SMARTdesks RP8-IC: Standard Ramp 1/8 Slope, 30 x 30 x 24 Interior Corner Reference attached PWS Physical and performance characteristics, 3, EA; LI 010: Manufacturer: CBT Supply/SMARTdesks RP08-36: ADA Ramp 1/8 Slope, 36 long 24 wide Reference attached PWS Physical and performance characteristics, 25, EA; LI 011: Manufacturer: CBT Supply/SMARTdesks RP08-48: ADA Ramp 1/8 Slope, 48 long 24 wide Reference attached PWS Physical and performance characteristics, 7, EA; LI 012: Manufacturer: CBT Supply/SMARTdesks FFIT-VF-500: Volara Foam (500 sq ft roll) Reference attached PWS Physical and performance characteristics, 17, EA; LI 013: Manufacturer: CBT Supply/SMARTdesks FFIT-PPC: JB Clip - Powerport Reference attached PWS Physical and performance characteristics, 183, EA; LI 014: Manufacturer: CBT Supply/SMARTdesks FFIT-PLA: Power Port Lid Assy Standard Reference attached PWS Physical and performance characteristics, 119, EA; LI 015: Manufacturer: CBT Supply/SMARTdesks FFIT-EOI: Elec Duplex Outlet Insert - 20A Reference attached PWS Physical and performance characteristics, 112, EA; LI 016: Manufacturer: CBT Supply/SMARTdesks FFIT-ECA-96LE: Elec Cable Assy - 8 wire - Line Entry 96" Reference attached PWS Physical and performance characteristics, 11, EA; LI 017: Manufacturer: CBT Supply/SMARTdesks FFIT-ECA-120PP: Elec Cable Assy - 8 wire - PWR / PWR 120" Reference attached PWS Physical and performance characteristics, 83, EA; LI 018: Manufacturer: CBT Supply/SMARTdesks FFIT-ECA-144PP: Elec Cable Assy - 8 wire - Pwr / Pwr 144" Reference attached PWS Physical and performance characteristics, 10, EA; LI 019: Manufacturer: CBT Supply/SMARTdesks TM-36: Transition Molding Strips 36" long Reference attached PWS Physical and performance characteristics, 14, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Pennsylvania intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Pennsylvania is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. 52.203-3; 52.203-6;52.232-39; 52.204-10; 52.209-6; 52.219-6; 52.219-4; 52.219-8; 52.223-18; 52.232-33, 52.233-3,4; 52.237-2; 52.209-6; 52.237-3; 52.246-25; 52.22-50 All clauses can be found in their entirety at http://farsite.hill.af.mil 252.203-7000; 252.203-7003; 252.232-7010; 252.237-7010; 252.252-2; 252.209-7993; 252.203-7001; 252.204-7003; 252.209-7004; 252.232-7006; 252.243-7001; 252.243-7002; 252.204-7012 WIDE AREA WORKFLOW STATEMENT (FEB 2006) IAW 252.232-7003, all invoices must be submitted via WAWF. It is mandatory that you use this E-Invoicing system to ensure timely payment of your invoice. WAWF is a web-based tool for the processing of invoices/receiving reports. This will bring about major changes in the amount of time it takes to process these documents making payment much faster. The web site for this system is https://wawf.eb.mil. There are no charges to use WAWF. 52.211-6 -- Brand Name or Equal As prescribed in 11.107(a), insert the following provision: Brand Name or Equal (Aug 1999) (a) If an item in this solicitation is identified as brand name or equal, the purchase description reflects the characteristics and level of quality that will satisfy the Government s needs. The salient physical, functional, or performance characteristics that equal products must meet are specified in the solicitation. (b) To be considered for award, offers of equal products, including equal products of the brand name manufacturer, must (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate equal products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an equal product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) BASIS FOR AWARD: This is a competitive best value acquisition utilizing simplified acquisition procedures. For quotations determined technically acceptable and the vendor has an acceptable or neutral past performance, a best value selection based on price and delivery will be made. An offeror will be determined technically acceptable if no exception is taken to the specifications and requirements of the RFQ. Award will then be based on price. Each offeror's quoted price will be evaluated for reasonableness. Price will always be an important factor; therefore, offerors should make diligent efforts to control costs and submit fairly priced quotes. Documentation is required detailing product offered unless offering exact items specified.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/fc897bb8ed3e897ea75dca9c4c28e8d9)
- Place of Performance
- Address: ANNVILLE, PA 17003
- Zip Code: 17003
- Zip Code: 17003
- Record
- SN05442752-W 20190914/190912231324-fc897bb8ed3e897ea75dca9c4c28e8d9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |