AWARD
Z -- Service/Repair (3) Three Centrisys Centrifuge's Mainside WWTP Bldg. 659-J
- Notice Date
- 10/8/2019
- Notice Type
- Award Notice
- NAICS
- 221310
— Water Supply and Irrigation Systems
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, NAVFAC Washington, Chesapeake, ROICC Quantico, Building 2004, PO Box 1855, Marine Corps Base, Quantico, Virginia, 22134-0855
- ZIP Code
- 22134-0855
- Solicitation Number
- N40080-19-Q-11019
- Archive Date
- 10/10/2019
- Point of Contact
- Larry D. Curtis, Phone: 7037841079
- E-Mail Address
-
larry.d.curtis1@navy.mil
(larry.d.curtis1@navy.mil)
- Small Business Set-Aside
- N/A
- Award Number
- N40080-19-C-1019
- Award Date
- 9/25/2019
- Awardee
- Blue Construction Services LLC, 735 VANDERBILT TER SE, LEESBURG, Virginia 20175-4085, United States
- Award Amount
- $281,988.00
- Description
- Repair CS14-4 Centrifuge #1 The contractor shall include/perform the following: •· Lock out/tag out any major equipment being serviced. •· Follow manufacturer's specifications for service. •· Dismantle, clean and inspect Centrifuge •· Provide report with digital pictures •· Replace all bearings and seals on Centrifuge •· Replace worn discharge nozzles on Centrifuge •· Repair conical wear •· Repair scroll •· Repair feed chamber wear •· Shipping Centrifuge bowl (both ways) to include site service and crane for removal and installation of repaired bowl. •· rotating assembly •· Hi-speed balance bowl •· Hi-speed balance scroll •· Repair 1071S/F Roto-diff (bearings and seals only) •· Replace lubricator •· New speed sensors and belts •· Reassemble •· Perform operational check of the equipment after the service/repairs are completed. •· Replace panel disconnect •· Replace CVC •· Replace pressure transducer •· Replace prox sensors and cables and bracket •· Replace cable and plug for prop valve •· Replace oil and filter in hydraulics. •· Replace sealing tape and housing hardware •· Replace all isolators for guards •· Replace feed-tube •· Replace panel cooler •· Replace main motor with pulley and taper-lock bushing Repair CS14-4 Centrifuge #2 The contractor shall include/perform the following: •· Lock out/tag out any major equipment being serviced. •· Follow manufacturer's specifications for service. •· Dismantle, clean and inspect Centrifuge •· Provide report with digital pictures •· Replace all bearings and seals on Centrifuge •· Replace worn discharge nozzles on Centrifuge •· Repair conical wear •· Repair scroll •· Repair feed chamber wear •· Shipping Centrifuge bowl (both ways) to include site service and crane for removal and installation of repaired bowl. •· Hi-speed balance bowl •· Hi-speed balance scroll •· Repair 1071S/F Roto-diff (bearings and seals only) •· Replace lubricator •· New speed sensors and belts •· Reassemble •· Perform operational check of the equipment after the service/repairs are completed. •· Replace panel disconnect •· Replace prox sensors and cables and bracket •· Replace oil and filter in hydraulics. •· Replace sealing tape and housing hardware •· Replace all isolators for guards •· Replace feed-tube •· Replace panel cooler Repair CS14-4 Centrifuge #3 The contractor shall include/perform the following: •· Lock out/tag out any major equipment being serviced. •· Follow manufacturer's specifications for service. •· Dismantle, clean and inspect Centrifuge •· Provide report with digital pictures •· Replace all bearings and seals on Centrifuge •· Replace worn discharge nozzles on Centrifuge •· Repair conical wear •· Repair scroll •· Repair feed chamber wear •· Shipping Centrifuge bowl (both ways) to include site service and crane for removal and installation of repaired bowl. •· Hi-speed balance bowl •· Hi-speed balance scroll •· Repair 1071S/F Roto-diff (bearings and seals only) •· Replace lubricator •· New speed sensors and belts •· Reassemble •· Perform operational check of the equipment after the service/repairs are completed. •· Replace panel disconnect •· Replace prox sensors and cables and bracket •· Replace oil and filter in hydraulics. •· Replace sealing tape and housing hardware •· Replace all isolators for guards •· Replace feed-tube •· Replace panel cooling fans •· Replace CVC •· Replace temp level switch
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVFAC/N62477QUAN/Awards/N40080-19-C-1019.html)
- Record
- SN05470914-W 20191010/191008230642-90a341e518843f0df385f585b207f7d4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |