SOLICITATION NOTICE
47 -- Restrictor, Fluid Flow
- Notice Date
- 10/17/2019
- Notice Type
- Presolicitation
- NAICS
- 332996
— Fabricated Pipe and Pipe Fitting Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPE7MX-19-R-0122
- Archive Date
- 11/19/2019
- Point of Contact
- Robert J. Varcho, Phone: 614-692-1372
- E-Mail Address
-
robert.varcho@dla.mil
(robert.varcho@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- National Stock Number (NSN): 4730-01-190-3154 Item Name: Restrictor, Fluid Flow Destination Information: Various DLA Stocking Locations AMC/AMSC Code: 1B* NAICS Code: 332996 - Fabricated Pipe and Pipe Fitting Manufacturing This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Freight on Board (FOB) will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be a Long Term Contract (LTC). The duration of the contract will be for a total of three (3) years, consisting of one (1) base year, and two (2) option years. The option years may be exercised at the discretion of the Government. The required delivery is 150 days. The Procurement Item Description (PID) for this NSN can be found at the bottom of this document. Based upon market research, the Government is using the policies contained in FAR Part 15 - Contracting by Negotiation - in its solicitation for the described supplies or services. This will be solicited as a Service-Disabled, Veteran-Owned Small Business Set-Aside. The solicitation will be posted to the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about November 5, 2019. Specifications, plans or drawings are not available. RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 9 of Page 1 of Standard Form 33 (Solicitation, Offer and Award). All responsible sources may submit an offer/proposal, which shall be considered. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance, as described in the solicitation. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. * Acquisition Method Code (AMC) / Acquisition Method Suffix Code (AMSC) Description: • AMC 1: Suitable for competitive acquisition for the second or subsequent time. • AMSC B: This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. STO CS001 - Export Control This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses Product Item Description (PID), Packaging & Marking - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 4730-01-190-3154 RESTRICTOR,FLUID FLOW. REFERENCE NUMBER:RP001 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CS001 REFERENCE NUMBER:CS187 REFERENCE NUMBER:CS120 CRITICAL APPLICATION ITEM Lee Company, The 92555 P/N JEBX0501700A IAW BASIC DRAWING NR 78286 70450-01800 REVISION NR AY DTD 07/24/2008 PART PIECE NUMBER: 70450-01800-102 IAW REFERENCE DRAWING NR 78286 70450-01800 REVISION NR C DTD 10/25/2004 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************ GLOSSARY ************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951 The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. e ITEM DESCRIPTION TEXT REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RD002 THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE COVERED DEFENSE INFORMATION (CDI). CDI IS UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION<(>,<)> AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION (CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO DFARS 252.204-7012. REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REFERENCE NUMBER CS120 NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7MX-19-R-0122/listing.html)
- Record
- SN05476818-W 20191019/191017230701-af094b31484c81ae73df76e380442945 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |